| 好氧颗粒污泥处理增塑剂生产废水 |
| |
| 引用本文： | 张伟,王新刚,林兵.好氧颗粒污泥处理增塑剂生产废水[J].化工环保,2013,33(3):226-229. |
| |
| 作者姓名： | 张伟 王新刚 林兵 |
| |
| 作者单位： | 江苏科技大学，生物与化学工程学院，江苏，镇江?212018 |
| |
| 基金项目： | 江苏省自然科学基金资助项目，江苏省高校自然科学研究计划项目，江苏科技大学博士科研启动基金资助项目 |
| |
| 摘 要： | 以SBR为反应器，利用好氧颗粒污泥处理增塑剂生产废水。实验结果表明:通过培养驯化后，好氧颗粒污泥对该废水具有较好的处理效果;好氧颗粒污泥对增塑剂生产废水中COD的去除率为78%，出水COD为62mg/L，接近于GB18918－2002《城镇污水处理厂污染物排放标准》中的一级B标准;出水中NH3-N未检出，TP为0.03mg/L，去除率分别达到100%和90%。
|
| 关 键 词： | 好氧颗粒污泥 增塑剂 序批式活性污泥法 废水处理 |
| 收稿时间： | 2013-06-25 |
Treatment of Plasticizer Production Wastewater by Aerobic Granular Sludge |
| |
| Zhang Wei
,
Wang Xingang
,
Lin Bing.Treatment of Plasticizer Production Wastewater by Aerobic Granular Sludge[J].Environmental Protection of Chemical Industry,2013,33(3):226-229. |
| |
| Authors: | Zhang Wei Wang Xingang Lin Bing |
| |
| Institution: | School of Biology and Chemistry Engineering,Jiangsu University of Science and Technology,Zhenjiang Jiangsu 212018,China |
| |
| Abstract: | Plasticizer wastewater was treated by aerobic granular sludge (AGS) in a SBR reactor. The experimental results show that:After cultivation and acclimation,the treatment effect of plasticizer wastewater by AGS is good;The COD removal rate is 78%,the effluent COD is 62 mg/L,which is close to the B standard of first criteria of GB18918-2002;NH3-N in the effluent is not detected,and TP is 0.03 mg/L with 100% and 90% of removal rate respectively. |
| |
| Keywords: | aerobic granular sludge plasticizer sequencing batch activated sludge process wastewater treatment |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《化工环保》浏览原始摘要信息 |
| 点击此处可从《化工环保》下载免费的PDF全文 |
