| PN-ANAMMOX一体化反应器处理电子行业PCB废水 |
| |
| 引用本文： | 袁砚,李祥,周呈,陈宗姮.PN-ANAMMOX一体化反应器处理电子行业PCB废水[J].环境科学,2015,36(7):2591-2596. |
| |
| 作者姓名： | 袁砚 李祥 周呈 陈宗姮 |
| |
| 作者单位： | 苏州科技学院环境科学与工程学院，苏州 215009; 苏州科技学院环境生物技术研究所，苏州 215009 |
| |
| 基金项目： | 国家自然科学基金项目(51008202);江苏省环境保护厅重大项目(201104);苏州科技学院基金项目(XKY201103);江苏省环境科学与工程重点专业项目;江苏省特色优势学科二期项目 |
| |
| 摘 要： | 利用已经启动成功并达到稳定脱氮效能的部分亚硝化-厌氧氨氧化一体化反应器,研究碱性印制电路板(PCB)废水自养生物脱氮的可行性及运行特性.结果表明,将进水NH+4-N浓度维持在220 mg·L-1时,经过80 d的运行,一体化反应器出水NH+4-N、NO-2-N浓度降低并稳定在4.0 mg·L-1和9.8 mg·L-1左右,脱氮效能最高达到1.29 kg·(m3·d)-1.同时出水总氮小于50 mg·L-1,满足接管排放标准.一体化反应器内好氧区NO-2-N产生速率最高为2.05 kg·(m3·d)-1,厌氧区的厌氧氨氧化菌最高脱氮效能为2.91 kg·(m3·d)-1,说明各功能菌在相应区域得到稳定地增长.一体化反应器适用于无机含氨的碱性PCB废液自养生物脱氮处理.
|
| 关 键 词： | 亚硝化 厌氧氨氧化 一体化反应器 PCB 废水 脱氮效能 |
| 收稿时间： | 2014/11/14 0:00:00 |
| 修稿时间： | 2015/1/30 0:00:00 |
Optoelectronic PCB Wastewater Treatment by Partial Nitrification-ANAMMOX Integrative Reactor |
| |
| YUAN Yan,LI Xiang,ZHOU Cheng and CHEN Zong-heng.Optoelectronic PCB Wastewater Treatment by Partial Nitrification-ANAMMOX Integrative Reactor[J].Chinese Journal of Environmental Science,2015,36(7):2591-2596. |
| |
| Authors: | YUAN Yan LI Xiang ZHOU Cheng and CHEN Zong-heng |
| |
| Institution: | School of Environmental Science and Engineering, Suzhou University of Science and Technology, Suzhou 215009, China;Institute of Environmental Biotechnology, Suzhou University of Science and Technology, Suzhou 215009, China;School of Environmental Science and Engineering, Suzhou University of Science and Technology, Suzhou 215009, China;Institute of Environmental Biotechnology, Suzhou University of Science and Technology, Suzhou 215009, China;School of Environmental Science and Engineering, Suzhou University of Science and Technology, Suzhou 215009, China;Institute of Environmental Biotechnology, Suzhou University of Science and Technology, Suzhou 215009, China;School of Environmental Science and Engineering, Suzhou University of Science and Technology, Suzhou 215009, China;Institute of Environmental Biotechnology, Suzhou University of Science and Technology, Suzhou 215009, China |
| |
| Abstract: | The feasibility and operating characteristics of treatment of printed circuit board (PCB) wastewater by using autotrophic nitrogen removal process in partial nitrification and ANAMMOX integrative reactor were investigated. The reactor had startup successfully and achieved the stable nitrogen removal efficiency. The results showed that, after 80d operation, the nitrogen removal rate increased and was up to 1.29 kg ·(m3 ·d)-1, the effluent NH4+-N and NO-2-N were decreased and stabilized at 4.0 mg ·L-1, 9.8 mg ·L-1 respectively, when the influent concentration of NH4+-N maintained at 220 mg ·L-1. At the same time, the concentration of total nitrogen was less than 50 mg ·L-1 in effluent, which meet the quality emissions requirements. The NO-2-N production rate was up to 2.05 kg ·(m3 ·d)-1 by nitrite bacteria in aerobic zone, and the highest nitrogen removal rate was 2.91 kg ·(m3 ·d)-1 by ANAMMOX bacteria in anaerobic zone, which illuminated functional bacteria were steadily grown in the corresponding region. The inorganic ammonia in PCB wastewater could be removed by autotrophic nitrogen removal process in nitrification and ANAMMOX integrative reactor. |
| |
| Keywords: | partial nitrification ANAMMOX integrative reactor PCB wastewater nitrogen removal rate |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《环境科学》浏览原始摘要信息 |
| 点击此处可从《环境科学》下载免费的PDF全文 |
|
