Monitoring and control methods of harmful algal blooms in Chinese freshwater system: a review

Environmental Science and Pollution Research - Harmful algal blooms (HABs) are a worldwide problem with substantial adverse effects on the aquatic environment as well as human health, which have...     

Heavy metal pollution disturbs immune response in wild ant populations

Concern about the effects of environmental contaminants on immune function in both humans and wildlife is growing and practically nothing is known about this impact on terrestrial invertebrates, even though they are known to easily accumulate pollutants. We studied the effect of industrial heavy metal contamination on immune defense of a free-living wood ant (Formica aquilonia). To find out whether ants show an adapted immune function in a polluted environment, we compared encapsulation responses between local and translocated colonies. Local colonies showed higher heavy metal levels than the translocated ones but the encapsulation response was similar between the two groups, indicating that the immune system of local ants has not adapted to high contamination level. The encapsulation response was elevated in moderate whereas suppressed in high heavy metal levels suggesting higher risk for infections in heavily polluted areas.     

Factors affecting the performance of a solar still and productivity enhancement methods: A review

Environmental Science and Pollution Research - Good-quality drinking water is an essential requirement for a healthy and sustainable future. In the current scenario, people living in remote areas...     

Monitoring birds of prey in Finland: a summary of methods, trends, and statistical power

In Finland, Comprehensive Surveys to monitor numbers and productivity of four endangered species of birds of prey were started in the early 1970s. In 1982, the Ringing Center launched the Raptor Grid, a nationwide monitoring program for all other bird-of-prey species based on 10 x 10 km study plots of the Finnish National Grid. The annual total of study plots surveyed by voluntary raptor ringers has averaged 120. Since 1986, additional information on breeding performance has been collected using the Raptor Questionnaire. In 2006, more than 44 262 potential nest sites of birds of prey were inspected, and 12 963 occupied territories, including 8149 active nests, were found and reported by ringers. The population trend during 1982-2006 has been significantly negative in six species and positive or neutral in 18 species. Statistical power of the time series of numbers and productivity has been adequate for all species except the microtine specialists.     

Occurrence of heavy metals and their removal in Perna viridis mussels using chemical methods: a review

Environmental Science and Pollution Research - Despite the nutritional benefits, bivalves like mussels are also an excellent aquatic heavy metal biomonitoring agent due to their high tolerance to...     

The advantages of clay mineral modification methods for enhancing adsorption efficiency in wastewater treatment: a review

Environmental Science and Pollution Research - This review discusses the recent trends in the research over the last 30 years to use clay minerals in natural and modified forms for removing...     

A review of ecosystem service benefits from wild bees across social contexts

In order to understand the role of wild bees in both social and ecological systems, we conducted a quantitative and qualitative review of publications dealing with wild bees and the benefits they provide in social contexts. We classified publications according to several attributes such as services and benefits derived from wild bees, types of bee–human interactions, recipients of direct benefits, social contexts where wild bees are found, and sources of changes to the bee–human system. We found that most of the services and benefits from wild bees are related to food, medicine, and pollination. We also found that wild bees directly provide benefits to communities to a greater extent than individuals. In the social contexts where they are found, wild bees occupy a central role. Several drivers of change affect bee–human systems, ranging from environmental to political drivers. These are the areas where we recommend making interventions for conserving the bee-human system.     

Determination of critical pollutant levels in wild populations, examples from organochlorine insecticides in birds of prey

In assessing effects of pollutants on wild organisms, ecological concern is not so much with the protection of individuals, but with the maintenance of self-sustaining populations. Measures of the toxicity of chemicals made under laboratory conditions are thus of limited use when applied to populations in the field. For wild populations the critical level of any pollutant is that level which will lead to population decline (LPD). Among a range of species, this level may bear no consistent relationship to the LD(50) (or LC(50)). In some British birds of prey, whose numbers had been reduced mainly by HEOD poisoning, it was possible to determine the level of HEOD in the birds below which population recovery occurred. For Sparrowhawk and Kestrel, this was equivalent to a geometric mean HEOD level in livers of birds found dead of about 1.0 microg g(-1) (in wet weight). For Peregrines, it was equivalent to a geometric mean HEOD level in addled eggs of 0.7 microg g(-1) (wet weight).     

The United Kingdom Acid Waters Monitoring Network: a review of the first 15 years and introduction to the special issue

The United Kingdom Acid Waters Monitoring Network (AWMN) was established in 1988 to determine the ecological impact of acidic emissions control policy on acid-sensitive lakes and streams. AWMN data have been used to explore a range of causal linkages necessary to connect changes in emissions to chemical and, ultimately, biological recovery. Regional scale reductions in sulphur (S) deposition have been found to have had an immediate influence on surface water chemistry, including increases in acid neutralising capacity, pH and alkalinity and declines in aluminium toxicity. These in turn can be linked to changes in the aquatic biota which are consistent with "recovery" responses. A continuation of the current programme is essential in order to better understand apparent non-linearity between nitrogen (N) in deposition and runoff, the substantial rise in organic acid concentrations, and the likely impacts of forecast climate change and other potential constraints on further biological improvement.     

Microbial degradation of phenols: a review

The microbial degradation of phenols has been reviewed including the phenol-degrading microbes, factors affecting degradability, and the use of biotechnology with emphasis on degradation mechanisms and their kinetics. The mechanism of microbial degradation depends on aerobic and anaerobic conditions. Under aerobic conditions, degradation of phenol was shown to be initiated by oxygenation into catechols as intermediates followed by a ring cleavage at either the ortho or meta position, depending on the type of strain. Anaerobic biodegradation of phenol occurs by carboxylation followed by dehydroxylation (reducing reaction) and dearomatisation. It was also clear that the parameters used in the Haldane model are not constants but vary, hence it may never be possible to describe the kinetic properties of a microbial cell with a single set of constants.     

A review of the main methods for composite adsorbents characterization

Environmental Science and Pollution Research - Adsorption is a promising technology for removing several contaminants from aqueous matrices. In the last years, researchers worldwide have been...     

Monitoring atmospheric pollutants in the biosphere reserve Wienerwald by a combined approach of biomonitoring methods and technical measurements

In this study a combined approach of bioindication results correlated with an extensive set of data on air pollution and climate was used to assess the pollution status of the Man and Biosphere Reserve Wienerwald (Austria). Bryophytes served as impact indicators (via the Index of Atmospheric Purity-method IAP) at 30 sites as well as accumulation monitors for airborne trace elements (Al, Pb, V, S, Zn, Fe, Cu, Cr, Ni, Co, Mo, Cd, As, Sb and 16 EPA-PAHs) at 10 sites within the reserve. The results of these bioindication methods were subsequently correlated with further pollution (NO(2), SO(2) and dust) and climate data (precipitation, temperature and humidity). The findings obtained clearly indicate the following: Bryophyte distribution is solely influenced by the status of air quality, without interference by climatic or site-related factors, which is in contrast to several previous investigations. IAP-values correlated significantly with NO(2) (0.553; P=0.004), SO(2) winter values (0.511; P=0.013) and PM10 (dust) (0.561; P=0.013). The results obtained via chemical analyses revealed a strong correlation with data derived from the IAP methodology. In terms of the overall air quality within the biosphere reserve Wienerwald, the north-eastern part appears to be the most affected one with a most likely pollution contribution emitted by the capital city Vienna, agriculture and neighbouring countries.     

Receptor modeling of ambient particulate matter data using positive matrix factorization: review of existing methods

Methods for apportioning sources of ambient particulate matter (PM) using the positive matrix factorization (PMF) algorithm are reviewed. Numerous procedural decisions must be made and algorithmic parameters selected when analyzing PM data with PMF. However, few publications document enough of these details for readers to evaluate, reproduce, or compare results between different studies. For example, few studies document why some species were used and others not used in the modeling, how the number of factors was selected, or how much uncertainty exists in the solutions. More thorough documentation will aid the development of standard protocols for analyzing PM data with PMF and will reveal more clearly where research is needed to help future analysts select from the various possible procedures and parameters available in PMF. For example, research likely is needed to determine optimal approaches for handling data below detection limits, ways to apportion PM mass among sources identified by PMF, and ways to estimate uncertainties in the solution. The review closes with recommendations for documenting the methodological details of future PMF analyses.     

Toxicological aspects of trihalomethanes: a systematic review

Environmental Science and Pollution Research - Chlorine is considered the most used chemical agent for water disinfection worldwide. However, water chlorination can lead to by-product generation...     

Anaerobic treatment of slaughterhouse wastewater: a review

This article presents a review of anaerobic treatment technologies to treat slaughterhouse wastewater including its advantages and disadvantages. Physico-chemical characteristics and biochemical methane potential (BMP) of slaughterhouse wastewater are addressed. Various anaerobic treatment technologies are presented with the related operating parameters, viz., hydraulic retention time (HRT), organic loading rate (OLR), upflow velocity (V_up), and biogas yield vis-a-vis treatment efficiency in terms of chemical oxygen demand (COD). In addition, various factors that affect the anaerobic treatment of slaughterhouse wastewater such as high oil & grease (O & G) concentration in influent, inhibitors, volatile fatty acids (VFAs), and the loading rate are also addressed. The literature review indicated that the slaughterhouse wastewater can be treated effectively by employing any anaerobic treatment technologies at OLRs up to 5 kg COD/m³.d with more than 80% COD removal efficiency without experiencing operational problems. Anaerobic hybrid reactors (AHRs) were found the most effective among various reviewed technologies because of their ability to operate at higher OLRs (8 to 20 kg COD/m³.d) and lower HRTs (8 to 12 hrs).

     

Treatment of wastewater by electrocoagulation: a review

The electrocoagulation (EC) process is an electrochemical means of introducing coagulants and removing suspended solids, colloidal material, and metals, as well as other dissolved solids from water and wastewaters. The EC process has been successfully employed in removing pollutants, pesticides, and radionuclides. This process also removes harmful microorganisms. More often during EC operation, direct current is applied and electrode plates are sacrificed (dissolved into solution). The dissolution causes an increased metal concentration in the solution that finally precipitates as oxide precipitates. Due to improved process design and material of construction, the EC process is being widely accepted over other physicochemical processes. Presently, this process has gained attention due to its ability to treat large volume and for its low cost. The aim of this study is to review the mechanism, affecting factors, process, and application of the electrocoagulation process.     

Environmental impact of diuron transformation: a review

Diuron is a biologically active pollutant present in soil, water and sediments. A synthesis of literature data on its physicochemical properties, partitioning behaviour, abiotic and biotic transformations, toxicological and ecotoxicological impacts has been here performed. Data have shown that diuron is generally persistent in soil, water and groundwater. It is also slightly toxic to mammals and birds as well as moderately toxic to aquatic invertebrates. However, its principal product of biodegradation, 3,4-dichloroaniline exhibits a higher toxicity and is also persistent in soil, water and groundwater. Thus, diuron indirectly possesses a significant amount of toxicity and could be a potential poisoning pesticide contaminant of groundwater. Unfortunately, groundwater contamination will still persist despite the progressive suppression of diuron (Directive 200/60/CE). Therefore, determining the main factors influencing its degradation and its ecotoxicological effects on the environment and health could provide a basis for further development of bioremediation processes.     

Selective removal of common cyanotoxins: a review

Environmental Science and Pollution Research - The development of cyanobacterial blooms can have adverse effects on water bodies and may produce cyanotoxins. Several physical and chemical methods...