Evidence of sulphur and nitrogen deposition signals at the United Kingdom Acid Waters Monitoring Network sites

Some recent studies of trends in sulphate in surface waters have alluded to possible lag effects imposed by catchment soils, resulting in discrepancies between trends in deposition and run-off. To assess the extent of these possible effects in the UK, sulphate concentration data from the United Kingdom Acid Waters Monitoring Network (AWMN) sites are compared with estimates of sulphur deposition at each site. From these data, input-output budgets are computed at an annual time scale. The estimated budgets suggest a close association between catchment sulphur inputs and outputs at an annual scale, with well-balanced annual budgets at most sites, indicative of only minor lag effects. A similar analysis of the AWMN site nitrogen budget shows little evidence of an association between nitrogen inputs and outputs at this time scale.     

Bioavailability, accumulation and effects of heavy metals in sediments with special reference to United Kingdom estuaries: a review

Using mainly United Kingdom estuaries as examples, various factors governing the bioavailability, bioaccumulation and biological effects of heavy metals in sediment-dominated estuaries are reviewed. Estuaries and metals primarily discussed include the Mersey (Hg, methylmercury; Pb, alkyllead), the Loughor (Cr, Sn), the Severn (Ag, Cd), the Fal (As, Cu, Sn, Zn), Poole Harbour (Cd, Hg, Se, tributyltin) and Southampton Water (tributyltin). Concentrations and bioavailabilities of metals in estuarine sediments depend on many different processes. Examples include (1) mobilisation of metals to the interstitial water and their chemical speciation, (2) transformation (e.g. methylation) of metals including As, Hg, Pb and Sn (3) the control exerted by major sediment components (e.g. oxides of Fe and organics) to which metals are preferentially bound, (4) competition between sediment metals (e.g. Cu and Ag; Zn and Cd) for uptake sites in organisms, and (5) the influence of bioturbation, salinity, redox or pH on these processes. Under field conditions, identification of dominant processes can be achieved by observing the goodness of fit between metal concentrations in ubiquitous deposit-feeding species and levels in various types of sediment extract over a wide spectrum of sediment types. Factors of more local importance are often indicated by the marked deviation of some points from otherwise excellent relationships. For example, points lying above the line relating tissue Sn concentrations in the clam Scrobicularia plana to those in 1 n HCl extracts of sediments were found to reflect the accumulation of tributyltin, a more readily bioavailable form of Sn. In the same species, unexpectedly high tissue-Cu concentrations were characteristic of very anoxic in sediments and tissue And As and Pb concentrations were suppressed in sediments having high concentrations of Fe oxides. Under field conditions, examples of deleterious effects on benthic organisms that can be attributed to specific metallic pollutants are comparatively rare. Effects of tributyltins from antifouling paints on oysters and neogastropods have been documented and their toxicity has undoubtedly led to environmental degradation in many UK estuaries and coastal areas. In estuaries contaminated with metal-mining wastes, the effects of Cu and Zn on species distribution can be observed, but they are generally less obvious than would be predicted from experimental data. Effects are ameliorated by the induction of metal tolerance mechanisms in some species and in others by the appearance of tolerant strains. The induction of metal detoxification systems involving the formation of granules or metal-binding proteins leads in some species to tissue concentrations that are orders of magnitude higher than normal. For example, high concentrations of Cd and Ag have been found in some species from the Severn Estuary, although there is no unequivocal evidence that either metal has caused deleterious effects on benthic populations. On the other hand, experimental studies with Ag, Cd, Cr, Cu, Hg and Zn show that they are toxic to some species at environmentally realistic levels. Since pollutants rarely occur singly, it is likely that in many moderately contaminated estuaries metals contribute to the stress to organisms caused by substances requiring detoxification. There has been much speculation over the years concerning the biomagnification of metals with increasing trophic levels along food chains. Whilst animals having higher metal concentrations than their prey are sometimes found, the only consistent evidence of biomagnification concerns methylmercury. When estuarine birds are considered, there are relatively few instances in which deleterious effects can unequivocally be attributed to metals or their compounds. However, the Mersey bird kill was attributable to alkyllead pollution from industry. Among other organometals, methylmercury has proved toxic to birds but, so far, no evidence for the toxicity of tributyltin has been reported. However, the compound may have affected bird populations through its effects on the abundance of prey organisms, particularly estuarine molluscs. Of the inorganic forms of metals, Pb in the form of shot has caused problems in many areas and Cd, Hg and Se are suspected of causing toxic effects. There is little field evidence that birds have been affected by Ag, As, Cr, Cu or Zn individually. On the other hand, it is difficult to exclude the possibility that, additively, these metals may produce a significant effect. In part, the lack of evidence reflects the fact that relatively little research has been done. There is scope for more work on metals and organometals in estuarine birds, particularly with regard to their metabolism and their effects on juveniles and individuals subjected to stresses such as starvation.     

Food flows in the United Kingdom: The potential of surplus food redistribution to reduce waste

The increasing amount of food waste generated as a direct consequence of its excessive production, mismanagement, and wasteful behaviors represents a real challenge in promoting resource efficiency. In the United Kingdom (UK), the lack of robust mass flow data hinders the ability both to understand and address food waste challenges and to devise long-term sustainable prevention strategies. In recognition of these challenges, this paper seeks to (i) provide insights into the UK’s annual estimates of food mass flows, including imports, exports, distribution, consumption, surplus food production, and final disposal; and (ii) scrutinize the uptake and redistribution of surplus food as a potential food waste prevention strategy. Evidence collected from several enterprises and community-led initiatives in the UK, and London specifically, supports that there is an increasing potential of making a shift towards food redistribution and reuse. Further analysis has shown that the outreach of food redistribution initiatives in the UK is currently limited, possibly because redistribution efforts remain largely fragmented and independent from each other. It is concluded that a national commitment could be instrumental in encouraging the roll-out of this practice, and governmental support through fiscal incentives could lead to the development of a larger and coherent surplus food redistribution system, ultimately enabling food waste prevention and recovery of food’s multidimensional value.

Implications: This paper deals with the topical issue of the increasing amount of food waste generated as a direct consequence of excessive production, mismanagement, and wasteful behavior, representing a real challenge in achieving sustainability and resource efficiency. Currently, only a small fraction of food is redistributed back into the system. Yet, a considerable fraction of food waste generated is edible; thus, better planning, storage, and coordination amongst the different stakeholders in the food supply chain is required in order to prevent its wastage and promote its reuse in accordance with the waste hierarchy.     

The Scottish Raptor Monitoring Scheme: objectives, achievements in the first four years, and plans for future development

The Scottish Raptor Monitoring Scheme (SRMS) comprises 7 partner organizations and was established in 2002 after i) the publication of the UK Government's Raptor Working Group Report that made recommendations for enhanced monitoring, ii) increased applied data needs (e.g., for site designation), and iii) concerns for the status of some species. The SRMS has 3 major objectives: i) to facilitate cooperation between parties; ii) to provide robust information on Scottish raptor populations by determining trends in numbers, range, survival, and productivity and understanding the causes of change; and iii) to maintain high and uniform standards for the collection, collation, auditing, and analysis of data and reporting of information. Data are collected for 19 species: 14 diurnal raptors, 4 owls, and 1 corvid, the Common Raven. Here we describe the development of the scheme, challenges, and achievements during its first 4 y, the nature and value of the data collected, and plans for the future.     

Polynuclear aromatic hydrocarbons in the United Kingdom environment: a preliminary source inventory and budget

This paper presents the first attempt to quantify the production, cycling, storage and loss of PAHs in the UK environment. Over 53 000 tonnes of sigmaPAHs (sum of 12 individual compounds) are estimated to reside in the contemporary UK environment, with soil being the major repository. If soils at contaminated sites are included, this estimate increases dramatically. Emission of PAHs to the UK atmosphere from primary combustion sources are estimated to be greater than 1000 tonnes sigmaPAHs per annum, with over 95% coming from domestic coal combustion, unregulated fires and vehicle emissions. It is estimated that approximately 210 tonnes of sigmaPAH are delivered to terrestrial surfaces each year via atmospheric deposition. Therefore, inputs of PAHs to the UK atmosphere outweigh the outputs by a factor of over 4. This may be explained by enhanced particulate deposition near point sources, PAH degradation in the atmosphere and transport away from the UK with prevailing winds. Disposal of waste residues is estimated to contribute a further 1000 tonnes of sigmaPAH per year to the terrestrial environment. It is illustrated that the use of creosote has the potential to release considerable quantities of PAHs to the UK environment. Temporal trends in PAH cycling are then considered. There is good evidence to suggest that air concentrations and fluxes to the UK surface are now lower than at any time throughout this century. Nonetheless, the UK sigmaPAH burden is still increasing at the present time, principally through retention by soils. However, there are marked differences in the behaviour of individual compounds: there is evidence, for example, that phenanthrene concentrations in soils have declined since the 1960s, although soil concentrations of benzo[a]pyrene and other heavier PAHs have continued to increase through this century. Volatilisation of low molecular weight PAHs accumulated in soils over previous decades may be making an important contribution to the current atmospheric burden. The major uncertainties identified by data on this budget are: (1) the lack of PAH concentrations in some environmental matrices; (2) the possible importance of contaminated soils as a major repository and source of PAHs; (3) the lack of emission data (especially vapour phase releases) for some PAH sources; (4) the importance of biodegradation and volatilisation as loss mechanisms for low molecular weight PAHs in soils; and (5) the importance of creosote use in the PAH cycle.     

Sources of dioxins in the United Kingdom: the steel industry and other sources

Several countries have compiled national inventories of dioxin (polychlorinated dibenzo-p-dioxin [PCDD] and polychlorinated dibenzofuran [PCDF]) releases that detail annual mass emission estimates for regulated sources. High temperature processes, such as commercial waste incineration and iron ore sintering used in the production of iron and steel, have been identified as point sources of dioxins. Other important releases of dioxins are from various diffuse sources such as bonfire burning and domestic heating. The PCDD/F inventory for emissions to air in the UK has decreased significantly from 1995 to 1998 because of reduced emissions from waste incinerators which now generally operate at waste gas stack emissions of 1 ng I-TEQ/Nm3 or below. The iron ore sintering process is the only noteworthy source of PCDD/Fs at integrated iron and steelworks operated by Corus (formerly British Steel plc) in the UK. The mean waste gas stack PCDD/F concentration for this process is 1,2 ng I-TEQ/Nm3 based on 94 measurements and it has been estimated that this results in an annual mass release of approximately 38 g I-TEQ per annum. Diffuse sources now form a major contribution to the UK inventory as PCDD/Fs from regulated sources have decreased, for example, the annual celebration of Bonfire Night on 5th November in the UK causes an estimated release of 30 g I-TEQ, similar to that emitted by five sinter plants in the UK.     

Decabromodiphenylether and hexabromocyclododecane in wild birds from the United Kingdom, Sweden and The Netherlands: Screening and time trends

The brominated flame retardant decabromodiphenylether (DBDE) was analysed in wild birds to identify the most suitable species for monitoring time trends in DBDE contamination. This information was later used for the design of a 10-year trend study on DBDE in the European Union. DBDE was measured in muscle tissue, liver, and eggs from 10 terrestrial and four aquatic bird species. DBDE was detected in 47% of the terrestrial bird samples (nine species) and in 9% of the aquatic bird samples (six species). Peregrine falcon and sparrowhawk specimens were selected as most suitable species to determine temporal trends of DBDE. For sparrowhawks, no significant change in DBDE concentrations between 1973 and 2001 was found, although in later years more DBDE concentrations were above the detection limit. Peak DBDE levels measured in peregrines in 1995, were followed by a decline in concentrations until 2001. The same species were used for a trend study on hexabromocylcododecane (HBCD). Twenty-four percent of peregrine falcon eggs and 12% of sparrowhawk muscle samples demonstrated measurable HBCD residues. Three diastereomers of HBCD were analysed and the α-diastereomer was the predominant one in most samples. No clear time trends were observed for HBCD in either species. This study demonstrated that these DBDE and HBCD are bioavailable to birds of Northern Europe, although bioaccumulation seems to occur to a limited extent.     

Assessment of secondary organic carbon in the Southeastern United States: a review

Organic carbon (OC) is one of the major components of ambient PM2.5 (particulate matter [PM] < or = 2.5 microm in aerodynamic diameter) and a significant portion of OC is from secondary organic aerosol (SOA) formation in the southeastern United States. Various approaches (based on measurement and modeling results) are applied to estimate secondary organic carbon (SOC) and its origins in the region. SOC estimates by various methods are consistent as to clear seasonal variation (i.e., relatively higher SOC in summer) and little spatial variability (i.e., a regional characteristic of SOC). However, there are differences as to the origins of SOC. SOA organic tracer and emission-based modeling studies indicate that the biogenic origin of SOC is dominant in the Southeast, showing that biogenic-origin SOC accounts for 90% of SOC in summer and more than 70% even in other seasons. However, results from other studies suggest that the anthropogenic origin of SOC is dominant, significant amounts of anthropogenic-origin SOC, or important roles of anthropogenic pollutants for SOA formation, especially at urban areas, as strong correlations between water-soluble OC (an indicator of SOC) and anthropogenic pollutants, considerable amounts of fossil water-soluble OC, and significant contributions of fossil SOC (37-52% in summer months, 70-73% in winter months) are observed. Therefore, more studies are needed to reconcile the differences in the source attribution of SOC measurements.     

Monitoring and control methods of harmful algal blooms in Chinese freshwater system: a review

Environmental Science and Pollution Research - Harmful algal blooms (HABs) are a worldwide problem with substantial adverse effects on the aquatic environment as well as human health, which have...     

Correction to: The time of concentration application in studies around the world: a review

Environmental Science and Pollution Research -     

The role of mechanical and biological treatment in reducing methane emissions from landfill disposal of municipal solid waste in the United Kingdom

In Europe, the European Union Landfill Directive aims to reduce the negative environmental impacts of landfilling. This is mainly to be achieved by reducing the quantity of organic matter deposited, through measures such as the separate collection and recycling of the organic waste stream or pretreatment of residual wastes before landfilling. Other than incineration or other thermal processes, mechanical biological treatment is playing an increasingly important role. This study was conducted to seek the benefits of municipal solid waste (MSW) pretreatment, as well as the differences in methane production from the landfilling of untreated and mechanically/biologically treated (MBT) MSW using GasSim simulation. Results demonstrated that methane production rates vary significantly among waste fractions. Those that contribute most to methane generation (organic material and potentially reusable or recyclable material) could be targeted and treated before landfilling. The statistic relationship from the first phase of the study indicated that to match the increasingly stringent landfill waste organic content allowance, local councils should prioritize the reduction/sorting of certain targeted fractions, such as paper, card, green waste, and other putrescibles from MSW. Moreover, mechanical treatment alone produces organic-rich waste called mechanically sorted organic residues (MSORs), which can be viewed as an organic content concentration process. Mechanically and biologically pretreated waste, on the other hand, differs significantly from untreated MSW and MSORs. This work demonstrated that if efficient mechanical-biological treatment is used, considerable reductions in biological activity, landfill gas production, and energy content/total organic carbon could be achieved. Using GasSim, reductions in methane production of >74% have been simulated if a 90% organic content reduction can be achieved during biological treatment on MSORs. A 50-60% organic content reduction by following biological treatment can turn MSOR properties only into normal MSW equivalent though considerably less volume.     

Levels and distribution of polybrominated diphenyl ethers in humans and environmental compartments: a comprehensive review of the last five years of research

Environmental Science and Pollution Research - Polybrominated diphenyl ethers (PBDEs) are a class of brominated flame retardants (BFRs), present in the environment, animals, and humans. Their...     

Monitoring of water quality inflow and outflow of a farm in Italian Padana plain for rice cultivation: a case study of two years

Environmental Science and Pollution Research - Rice cultivation requires a large use of pesticides and nutrients to control weed proliferation and improve production. The water quality of four...     

The effect of nanosilica incorporation on the mechanical properties of concrete exposed to elevated temperature: a review

Environmental Science and Pollution Research - Exposing concrete to high temperatures leads to harmful effects in its mechanical and microstructural properties, and ultimately to total failure. In...     

Development of a regional oxidant model and application to the northeastern United States

Elevated oxidant concentrations due to the long-range transport of ozone and its precursors have been observed in many rural areas in the continental United States. The oxidation processes associated with ozone formation in the atmosphere have many important implications for regional air quality problems, such as regional haze and acid deposition. This paper describes the development and evaluation of a mesoscale photochemical air quality simulation model (RTM-III) covering the northeastern United States. The model considers an area 2080 km in the E-W direction by 1840 km in the N-S direction, with a spatial resolution on the order of 80 x 80 km, and a temporal resolution on the order of one hour. Data collected during an episode in July 1978 by the EPRI Sulfate Regional Experiment is used for testing and evaluating the model. In a comparison of hourly predictions with observations, the model predictions, with a few exceptions where local influences are suspected, generally track the measured spatial pattern and diurnal variation of ozone concentrations quite well. The correlation coefficient matched by time and location over more than 1500 pairs of hourly predicted and observed ozone concentrations is 0.7.     

Cancer and occupational exposure to pesticides: a bibliometric study of the past 10 years

Environmental Science and Pollution Research - Occupational exposure to pesticides has been identified as a major trigger of the development of cancer. Pesticides can cause intoxication in the...     

The analysis and levels of lead in human teeth: a review

Human teeth are a readily accessible biological tissue for which the analysis of lead has been used for the classification of people in terms of their lead exposure and absorption. However, there are three significant problem areas in the interpretation of the analytical results for lead in teeth. First, the lead is not homogeneously distributed throughout the tooth; secondly, the lead levels vary with tooth type, which relates to the age of a tooth. Lastly, there are significant variations in results from different laboratories, which, in part, reflect problems with contamination, pretreatment and analytical methods. Since teeth provide an integrated historical record of a person's lead exposure they have some attractive features as biological indicators, compared with materials such as blood. But considerable care and attention to detail is necessary to obtain reliable data.     

The time of concentration application in studies around the world: a review

Environmental Science and Pollution Research - The time of concentration (Tc) is the main hydrological parameter used to characterize the response of a given Hydrological Response Unit (HRU) to a...     

Climate change and the adaptability of agriculture: a review

The assessment of climate change impacts on agriculture has emerged as a recognizable field of research over the past 15 years or so. In a relatively short period, this area of work has undergone a number of important conceptual and methodological developments. Among many questions that have been debated are the adaptability of agriculture to climate change and the importance of land management adjustments in reducing the adverse effects of climate change. In turn, this latter focus has spawned a discussion regarding the nature of adaptation and the ability of agriculture to respond to sudden and rapid climatic changes. In this paper we present an overview of this debate. It is argued that the first generation of climate change impact studies generally ignored the possibility that agriculturalists may adjust their farming practices in order to cope with climate change or to take advantage of new production opportunities. This conceptual oversight has been largely eliminated over the past five years or so. However, questions remain surrounding the likelihood that various adaptive strategies will actually be deployed in particular places. In this paper, we stress the importance of studying adaptation in the context of decision-making at the individual farm level and beyond.