Chromium (VI) remediation by a native strain: effect of environmental conditions and removal mechanisms involved

A native bacterial strain with high capability for Cr (VI) removal was isolated from tannery sediments located in Elena (Córdoba Province, Argentina). The strain was characterized by amplification of 16S rRNA gene and identified as Serratia sp. C8. It was able to efficiently remove different Cr (VI) concentrations in a wide range of pHs and temperatures. The addition of different carbon sources as well as initial inoculum concentration were analyzed, demonstrating that Serratia sp. C8 could reduce 80 % of 20 mg/L Cr (VI) in a medium containing glucose 1 g/L, at pH 6–7 and 28 °C as optimal conditions, using 5 % inoculum concentration. The mechanisms involved in Cr (VI) removal were also evaluated. The strain was capable of biosorpting around 7.5–8.5 % of 20 mg/L Cr on its cell surface and to reduce Cr (VI). In addition, approximately a 54 and 46 % of total Cr was detected in the biomass and in the culture medium, respectively, and in the culture medium, Cr (III) was the predominant species. In conclusion, Serratia sp. C8 removed Cr (VI) and the mechanisms involved in decreasing order of contribution were as follows: reduction catalyzed by intracellular enzymes, accumulation into the cells, and biosorption to the microbial biomass. This strain could be a suitable microorganism for Cr (VI) bioremediation of tannery sediments and effluents or even for other environments contaminated with Cr.     

Application of a magnetotactic bacterium, Stenotrophomonas sp. to the removal of Au(III) from contaminated wastewater with a magnetic separator

In this study, the feasibility of applying a magnetotactic bacterial isolate (MTB), Stenotrophomonas sp. to the removal of Au(III) was investigated. Biosorption experiments showed that Au(III) biosorption capacity exhibited no significant difference in the initial pH range of 1.0-5.5, while decreased more significantly in the initial pH range of 5.5-13.0. Langmuir isotherm indicated that the maximum Au(III) biosorption capacity of Stenotrophomonas sp. were 506, 369 and 308 mg g(-1) dry weight biomass at the initial pH values of 2.0, 7.0 and 12.0, respectively. Thiourea was proved to be an effective desorbent to recover Au from the MTB biomass and 91% Au adsorbed on the biomass could be recovered at equilibrium when the thiourea concentration was 0.8M. The magnetic separator developed by our research team used for separating Au loaded MTB biomass showed high separation efficiency, with 100% biomass removed at the magnetic intensity of 1200 Gs in 180 min. The analyses from FTIR and XRD further confirmed that the reduction of Au(III) to Au(0) by the reductants on the MTB biomass occurred, and the deposition of nano-crystal Au(0) particles, ranging from 24.7 to 31.4 nm, could be estimated on the biomass surface.     

The interaction "light, Fe(III)" as a tool for pollutant removal in aqueous solution: degradation of alcohol ethoxylates

The photoinduced degradation of an alcohol ethoxylate (AE) (Brij 30) by Fe(III) in aqueous solution has been investigated. The study was carried out with the major fraction of ethoxymers having an alkyl chain length of 12 carbon atoms and n ethoxy units E (C12En). The Fe(III) sensitised degradation of this fraction occurs efficiently at 365 nm. The rate of degradation depends on the concentration of Fe(OH)2+, the most photoreactive species in terms of .OH radical formation. Formate ethoxylates were identified as photoproducts and shortening of the ethoxylated chain all along the degradation process was observed. The mechanism of Brij 30 degradation implies a major .OH radicals attack on the polyethoxylated chain. For prolonged irradiations, the total degradation of Brij 30 and of the photoproducts is obtained. Consequently, the degradation photoinduced by iron (III) could be an efficient method of AEs removal in water.     

Hexavalent chromium removal by a novel Serratia proteamaculans isolated from the bank of Sebou River (Morocco)

The novel Serratia proteamaculans isolated from a chromium-contaminated site was tolerant to a concentration of 500 mg Cr(VI)/l. The optimum pH and temperature for reduction of Cr(VI) by S. proteamaculans were found to be 7.0 and 30 °C, respectively. The Cr(VI) reduction rate decreased with the increase in Cr(VI) concentration from 100 to 400 mg/l, suggesting the enzymatic chromium reduction. Resting and permeabilised cell assays provided the better evidence that chromate reduction in S. proteamaculans is enzymatic. Reduction by cell-free filtrate shows no extracellular chromate-reducing activity, revealing that this activity may be associated to membrane fraction and/or cytosolic fraction. Assays conducted with cytosolic and particulate fraction of S. proteamaculans confirmed the role of membrane-bound proteins in Cr(VI) reduction. Furthermore, chromium reduced by heat-treated cells suggests that membrane-associated chromate reductase activity of S. proteamaculans is preceded by its adsorption on the cell surface.     

Kinetics of oxidation of chlorobenzenes and phenyl-ureas by Fe(II)/H2O2 and Fe(III)/H2O2. Evidence of reduction and oxidation reactions of intermediates by Fe(II) or Fe(III)

The rates of degradation of 1,2,4-trichlorobenzene (TCB), 2,5-dichloronitrobenzene (DCNB), diuron and isoproturon by Fe(II)/H2O2 and Fe(III)/H2O2 have been investigated in dilute aqueous solution ([Organic compound]0 approximately 1 microM, at 25.0 +/- 0.2 degrees C and pH < or = 3). Using the relative rate method with atrazine as the reference compound, and the Fe(II)/H2O2 (with an excess of Fe(II)) and Fe(III)/H2O2 systems as sources of OH radicals, the rate constants for the reaction of OH* with TCB and DCNB were determined as (6.0 +/- 0.3)10(9) and (1.1 +/- 0.2)10(9) M(-1) s(-1). Relative rates of degradation of diuron and isoproturon by Fe(II)/H2O2 were about two times smaller in the absence of dissolved oxygen than in the presence of oxygen. These data indicate that radical intermediates are reduced back to the parent compound by Fe(II) in the absence of oxygen. Oxidation experiments with Fe(III)/H2O2 showed that the rate of decomposition of atrazine markedly increased in the presence of TCB and this increase has been attributed to a regeneration of Fe(II) by oxidation reactions of intermediates (radical species and dihydroxybenzenes) by Fe(III).     

Chromium (III) recovery from waste acid solution by ion exchange processing using Amberlite IR-120 resin: batch and continuous ion exchange modelling

The use of ion exchange technology was studied to remove chromium (III) from acidic waste solution by Amberlite IR-120 resin. Batch and column experimental tests were conducted to provide data for theoretical models and verify the system performance of the adsorption process. Results of batch equilibrium tests indicated that Langmuir isotherm describes well the adsorption process, whereas experimental data also provide evidence that, under the present experimental conditions, chromium (III) adsorption by Amberlite IR-120 resin is film-diffusion controlled; on the other hand, the theoretical model used in the present investigation was found to predict reasonably well the ion exchange breakthrough performance.     

Assessment of heat-inactivated marine Aspergillus flavus as a novel biosorbent for removal of Cd(II), Hg(II), and Pb(II) from water

Environmental Science and Pollution Research - A novel marine fungus was isolated and classified as Aspergillus flavus strain EGY11. The heat-inactivated form of isolated Aspergillus flavus was...     

Removal of arsenic(III,V) by a granular Mn-oxide-doped Al oxide adsorbent: surface characterization and performance

In order to remove arsenic (As) from contaminated water, granular Mn-oxide-doped Al oxide (GMAO) was fabricated using the compression method with the addition of organic binder. The analysis results of XRD, SEM, and BET indicated that GMAO was microporous with a large specific surface area of 54.26 m^2/g, and it was formed through the aggregation of massive Al/Mn oxide nanoparticles with an amorphous pattern. EDX, mapping, FTIR, and XPS results showed the uniform distribution of Al/Mn elements and numerous hydroxyl groups on the adsorbent surface. Compression tests indicated a satisfactory mechanical strength of GMAO. Batch adsorption results showed that As(V) adsorption achieved equilibrium faster than As(III), whereas the maximum adsorption capacity of As(III) estimated from the Langmuir isotherm at 25 °C (48.52 mg/g) was greater than that of As(V) (37.94 mg/g). The As removal efficiency could be maintained in a wide pH range of 3~8. The presence of phosphate posed a significant adverse effect on As adsorption due to the competition mechanisms. In contrast, Ca²⁺ and Mg²⁺ could favor As adsorption via cation-bridge involvement. A regeneration method was developed by using sodium hydroxide solution for As elution from saturated adsorbents, which permitted GMAO to keep over 75% of its As adsorption capacity even after five adsorption–regeneration cycles. Column experiments showed that the breakthrough volumes for the treatment of As(III)-spiked and As(V)-spiked water (As concentration = 100 μg/L) were 2224 and 1952, respectively. Overall, GMAO is a potential adsorbent for effectively removing As from As-contaminated groundwater in filter application.

     

Removal of As(III) and As(V) from water by chitosan and chitosan derivatives: a review

As arsenic removal becomes a global concern, the development of removal processes for arsenic treatment is still a major challenge. With regard to environmental compatibility and cheapness, chitosan and chitosan derivatives are considered as a promising removal technology for arsenic. Chitosan and chitosan derivatives possess the properties of low cost and good sorption on the arsenic removal. The present review is concerned about the present understanding of the mechanisms involved in sorption processes. Further on, detailed discussions are given of the effects of various factors on the performance of chitosan and chitosan derivatives in arsenic treatment processes. Finally, special attention is paid to the future challenges of chitosan and chitosan derivatives utilized for industrial arsenic treatment.     

Synthesis of piperazine functionalized magnetic sporopollenin: a new organic-inorganic hybrid material for the removal of lead(II) and arsenic(III) from aqueous solution

Environmental Science and Pollution Research - The present work describes the successful functionalization/magnetization of bio-polymeric spores of Lycopodium clavatum (sporopollenin) with...     

Electrochemical incineration of indigo. A comparative study between 2D (plate) and 3D (mesh) BDD anodes fitted into a filter-press reactor

This paper compares the performance of 2D (plate) and 3D (mesh) boron-doped diamond (BDD) electrodes, fitted into a filter-press reactor, during the electrochemical incineration of indigo textile dye as a model organic compound in chloride medium. The electrolyses were carried out in the FM01-LC reactor at mean fluid velocities between 0.9?≤?u?≤?10.4 and 1.2?≤?u?≤?13.9 cm s^?1 for the 2D BDD and the 3D BDD electrodes, respectively, at current densities of 5.63 and 15 mA cm^?2. The oxidation of the organic matter was promoted, on the one hand, via the physisorbed hydroxyl radicals (BDD(^●OH)) formed from water oxidation at the BDD surface and, on the other hand, via active chlorine formed from the oxidation of chloride ions on BDD. The performance of 2D BDD and 3D BDD electrodes in terms of current efficiency, energy consumption, and charge passage during the treatments is discussed.     

Towards a rational design of materials for the removal of environmentally relevant cations: polymer inclusion membranes (PIMs) and surface-modified PIMs for Sn2+ sequestration in aqueous solution

Environmental Science and Pollution Research - This work is focused on the design and preparation of polymer inclusion membranes (PIMs) for potential applications for stannous cation sequestration...     

TiO2纳米管光催化处理络合银:Ag(I)与配体协同机制

以纳米TiO2为原料,采用水热合成法制备TiO2纳米管,以XRD、FT-IR和SEM进行表征。XRD表明TiO2纳米管主要为锐钛矿相;FT-IR表明制备材料含有丰富的羟基;SEM表明材料分散均匀、不易团聚,比原料具有更大的比表面积。在300 mL/min空气曝气、pH=3、T=(26±0.5) ℃和300 W紫外光照的条件下,进行光催化降解EDTA-Ag(I)和DTPA-Ag(I)的实验。结果表明,制备的催化材料对含络合银废水的处理具有较高的光催化活性,金属银的去除率和EDTA、DTPA的降解率都达到95%以上,反应近似符合一级模型;有机配体的光催化氧化与Ag(I)的光催化还原之间具有明显的协同效应。     

Nutrient dynamics as indicators of karst processes: comparison of the Chalk aquifer (Normandy, France) and the Edwards aquifer (Texas, U.S.A.)

Karst aquifers display a range of geologic and geomorphic characteristics in a wide range of climatic and land-use settings; identification of transport dynamics representative of karst aquifers in general could help advance our understanding of these complex systems. To this end, nutrient, turbidity, and major ion dynamics in response to storms were compared at multiple sites in two karst aquifers with contrasting characteristics and settings: the Chalk aquifer (Eure Department, Normandy, France) and the Barton Springs segment of the Edwards Aquifer (Texas, U.S.A.). The Chalk aquifer is typified by high matrix porosity, thick surficial deposits (up to 30 m thick), and agricultural land use; the Barton Springs segment is typified by low matrix porosity, outcropping limestone, and urban land use. Following one to three storms, from 5 to 16 samples from springs and wells were analyzed for major ions, and specific conductance and turbidity were monitored continuously. Comparison of the chemographs indicated some generalized responses, including an increase in turbidity and potassium concentrations and a decrease in major ion and nitrate concentrations with infiltrating storm runoff. Factor analysis of major ions and turbidity revealed strikingly similar behavior of the chemical variables for the two aquifers: The first two factors, explaining more than 75% of the variability, illustrate that dynamics of most major ions (including nitrate) are opposed to those of turbidity and of potassium. The results demonstrate that potassium and nitrate are effective tracers of infiltrating storm runoff and resident ground water, respectively, and the similar results for these two highly contrasting aquifers suggest that the dynamics identified might be applicable to karst systems in general.     

Activated carbon/Fe(3)O(4) nanoparticle composite: fabrication, methyl orange removal and regeneration by hydrogen peroxide

In the water treatment field, activated carbons (ACs) have wide applications in adsorptions. However, the applications are limited by difficulties encountered in separation and regeneration processes. Here, activated carbon/Fe₃O₄ nanoparticle composites, which combine the adsorption features of powdered activated carbon (PAC) with the magnetic and excellent catalytic properties of Fe₃O₄ nanoparticles, were fabricated by a modified impregnation method using HNO₃ as the carbon modifying agent. The obtained composites were characterized by X-ray diffraction, scanning and transmission electron microscopy, nitrogen adsorption isotherms and vibrating sample magnetometer. Their performance for methyl orange (MO) removal by adsorption was evaluated. The regeneration of the composite and PAC-HNO₃ (powdered activated carbon modified by HNO₃) adsorbed MO by hydrogen peroxide was investigated. The composites had a high specific surface area and porosity and a superparamagnetic property that shows they can be manipulated by an external magnetic field. Adsorption experiments showed that the MO sorption process on the composites followed pseudo-second order kinetic model and the adsorption isotherm date could be simulated with both the Freundlich and Langmuir models. The regeneration indicated that the presence of the Fe₃O₄ nanoparticles is important for a achieving high regeneration efficiency by hydrogen peroxide.     

邻苯二甲酸二(2-乙基己基)酯对硝化型曝气生物滤池的影响及其去除效能

为探究邻苯二甲酸二(2-乙基己基)酯(DEHP)对硝化反应的影响及其去除情况,采用2座下向流硝化型曝气生物滤池进行对比实验.其中一座滤池进水DEHP浓度为100 μg/L,另一座滤池进水中不添加DEHP作为空白对照.对比实验期间氨氮负荷先后调整为0.6 kg NH4+-N/(m3·d)和1.5 kg NH4+-N/(m3·d)2个工况.通过60 d的对比实验,结果发现,2种工况下进水加DEHP的滤池,出水亚氮积累率分别为83.92%和80.71%,氨氮去除率分别为97.52%和49.39%;进水不加DEHP的滤池,出水亚氮积累率分别为64.15%和49.37%,氨氮去除率分别为98.77%和49.34%.DEHP的加入均促进了滤池出水中亚氮的积累,但对氨氮的去除不产生影响.进水加DEHP的滤池在0.6 kg NH4+-N/(m3·d)氨氮负荷下运行时,氨氮去除率沿水流方向逐渐提高,在滤床深度为1 400 mm处达到98.40%.亚氮积累率沿水流方向呈现先升高后降低的趋势,在滤床800 mm处达到最高值94.21%.在2个工况条件下,下向流硝化型曝气生物滤池对DEHP的平均去除率分别为91.71%和89.38%.大部分DEHP是在滤池进水端200 mm之内去除的.     

一株新型Kerstersia gyiorum 菌株CY-2对 Cr(VI) 的还原性能

为探究李氏禾人工湿地-微生物燃料电池中铬还原菌与Cr(Ⅵ)的相互作用关系,从中筛选一株具有Cr(VI)还原能力的菌株CY-2,并对该菌还原Cr(VI)的特性和机制进行了探究。通过16S rRNA基因序列鉴定,该菌CY-2为Kerstersia gyiorum (OQ773627),其对Cr(VI)的最低抑制浓度为300 mg·L⁻¹;在较宽的pH(4.0~9.0)、温度(27~52 ℃)和接种量(1%~20%)内还原Cr(VI);并在pH=6.0、37 ℃和10%接种量下,该菌在36 h内对50 mg·L⁻¹ Cr(VI)的还原率为100%,对100、150、200和250 mg·L⁻¹ 的Cr(VI)在120 h内的还原率分别为62%、42%、25%和16%。此外,菌株CY-2对Mg²⁺、Mn²⁺、Cd²⁺、Cu²⁺、Co²⁺、Ni²⁺和Zn²⁺具有高耐受性,对呋喃唑酮、利福平和甲硝唑抗生素表现出耐药性,而对其他抗生素表现出敏感性。SEM-EDX和FTIR表征结果表明,菌株CY-2不对铬进行生物吸附;铬的存在导致了细菌细胞表面官能团的变化,并使含硫酸盐分子减少,从而该菌可能通过还原、生物累积和外排等机制有效还原铬。以上结果表明所筛选出的菌株CY-2在铬污染场地的有效生物修复中具有潜在的应用价值。