Observations and modelling of aerosol growth in marine stratocumulus—case study

Airborne measurements of the growth of the marine accumulation mode after multiple cycles through stratocumulus cloud are presented. The nss-sulphate cloud residual mode was log-normal in spectral shape and it’s mode radius was observed to progressively increase in size from 0.78 to 0.94 μm over 155 min of air parcel evolution through the cloudy marine boundary layer. The primary reason for this observed growth was thought to result from aqueous phase oxidation of SO₂ to aerosol sulphate in activated cloud drops. An aqueous phase aerosol–cloud-chemistry model was used to simulate this case study of aerosol growth and was able to closely reproduce the observed growth. The model simulations illustrate that aqueous phase oxidation of SO₂ in cloud droplets was able to provide enough additional sulphate mass to increase the size of activated aerosol. During a typical cloud cycle simulation, ≈4.6 nmoles kg^-1_air (0.44 μg m^-3) of sulphate mass was produced with ≈70% of sulphate production occurring in cloud droplets activated upon sea-salt nuclei and ≈30% occurring upon nss-sulphate nuclei, even though sea-salt nuclei contributed less than 15% to the activated droplet population. The high fraction of nss-sulphate mass internally mixed with sea-salt aerosol suggests that aqueous phase oxidation of SO₂ in cloud droplets activated upon sea-salt nuclei is the dominant nss-sulphate formation mechanism and that sea-salt aerosol provides the primary chemical sink for SO₂ in the cloudy marine boundary layer.     

Life cycle energy use,costs, and greenhouse gas emission of broiler farms in different production systems in Iran—a case study of Alborz province

In order to achieve sustainable development in agriculture, it is necessary to quantify and compare the energy, economic, and environmental aspects of products. This paper studied the energy, economic, and greenhouse gas (GHG) emission patterns in broiler chicken farms in the Alborz province of Iran. We studied the effect of the broiler farm size as different production systems on the energy, economic, and environmental indices. Energy use efficiency (EUE) and benefit-cost ratio (BCR) were 0.16 and 1.11, respectively. Diesel fuel and feed contributed the most in total energy inputs, while feed and chicks were the most important inputs in economic analysis. GHG emission calculations showed that production of 1000 birds produces 19.13 t CO_2-eq and feed had the highest share in total GHG emission. Total GHG emissions based on different functional units were 8.5 t CO_2-eq per t of carcass and 6.83 kg CO_2-eq per kg live weight. Results of farm size effect on EUE revealed that large farms had better energy management. For BCR, there was no significant difference between farms. Lower total GHG emissions were reported for large farms, caused by better management of inputs and fewer bird losses. Large farms with more investment had more efficient equipment, resulting in a decrease of the input consumption. In view of our study, it is recommended to support the small-scale broiler industry by providing subsidies to promote the use of high-efficiency equipment. To decrease the amount of energy usage and GHG emissions, replacing heaters (which use diesel fuel) with natural gas heaters can be considered. In addition to the above recommendations, the use of energy saving light bulbs may reduce broiler farm electricity consumption.     

“Modern agriculture” transfers many pesticides to watercourses: a case study of a representative rural catchment of southern Brazil

Environmental Science and Pollution Research - The total cultivated area in Brazil reached to 62 million ha in 2018, with the predominance of genetically modified soybean and corn (36 and 17...     

Potential of Eucalyptus globulus for the phytoremediation of metals in a Moroccan iron mine soil—a case study

Environmental Science and Pollution Research - The contamination left by abandoned mines demands sustainable mitigation measures. Hence, the aim of this study was to examine the phytoremediator...     

Sorption of lead in soil as a function of pH: a study case in México

Reactions of lead sorption onto soil are largely affected by properties and composition of soil and its solution. In this study, the lead sorption onto regosol eutric soil from Francisco I. Madero, Zacatecas, Mexico is evaluated at different pH values. Soil samples were suspended in lead solutions of 10, 25, 50, 100, 150, 200, 300, and 400 mg/l (as Pb(NO3)2). The pH was adjusted at 2, 3, 4, and 5.5 with nitric acid for each of the lead solution concentrations. In all the cases the ionic strength was I=0.09 M with calcium nitrate. The solid-liquid-ratios were fixed in 1:100 and 1:200 g/ml. The results show that lead sorption increases when pH increases. Experimental isotherms were adjusted by both Langmuir and Freundlich models. The Langmuir affinity parameter, K, indicates that the lead sorption capacity of Francisco I. Madero soils is largely perceptible to pH changes.     

Water reuse in industries: analysis of opportunities in the Paraíba do Sul river basin,a case study in Presidente Vargas Plant,Brazil

Environmental Science and Pollution Research - In recent years, the demand for clean water has been growing all over the world despite the different threats posed, including increasing pollution,...     

Simulation of the influence of industrial wastewater on a municipal sewage treatment plant—a case study

Purpose  

Industrial wastewater flow caused operational difficulties in the wastewater treatment plant in Debrecen, Hungary. Bioaugmentation was successfully applied to maintain effluent quality in the periods when wastewater of high starch content was accepted, but, at the end of 2008, the nitrification capacity of the plant decreased considerably due to improperly pre-treated pharmaceutical wastewater.     

Source separation of municipal solid waste: The effects of different separation methods and citizens’ inclination—case study of Changsha,China

A case study on the source separation of municipal solid waste (MSW) was performed in Changsha, the capital city of Hunan Province, China. The objective of this study is to analyze the effects of different separation methods and compare their effects with citizens’ attitudes and inclination. An effect evaluation method based on accuracy rate and miscellany rate was proposed to study the performance of different separation methods. A large-scale questionnaire survey was conducted to determine citizens’ attitudes and inclination toward source separation. Survey result shows that the vast majority of respondents hold consciously positive attitudes toward participation in source separation. Moreover, the respondents ignore the operability of separation methods and would rather choose the complex separation method involving four or more subclassed categories. For the effects of separation methods, the site experiment result demonstrates that the relatively simple separation method involving two categories (food waste and other waste) achieves the best effect with the highest accuracy rate (83.1%) and the lowest miscellany rate (16.9%) among the proposed experimental alternatives. The outcome reflects the inconsistency between people’s environmental awareness and behavior. Such inconsistency and conflict may be attributed to the lack of environmental knowledge. Environmental education is assumed to be a fundamental solution to improve the effect of source separation of MSW in Changsha. Important management tips on source separation, including the reformation of the current pay-as-you-throw (PAYT) system, are presented in this work.

Implications: A case study on the source separation of municipal solid waste was performed in Changsha. An effect evaluation method based on accuracy rate and miscellany rate was proposed to study the performance of different separation methods. The site experiment result demonstrates that the two-category (food waste and other waste) method achieves the best effect. The inconsistency between people’s inclination and the effect of source separation exists. The proposed method can be expanded to other cities to determine the most effective separation method during planning stages or to evaluate the performance of running source separation systems.     

Study of turbulent diffusion above and within a forest—application in the case of SO2

Some results concerning characteristics of airflow within and above a forest are presented: horizontal mean windspeed profiles, turbulence intensities, turbulent transfer coefficients, autocorrelation curves, energy spectra, turbulence scales, microscales.To understand the mechanisms of SO₂ diffusion within and above a forest, we have to calculate SO₂ fluxes at the top of the canopy and two methods are used for this: the first one uses speed fluctuations and the second one mean speed values.The aim of that work is to determine the behaviour of the forest towards SO₂ and to develop a diffusion model of SO₂ with associated absorption by the roughness.     

Pollution of water in Africa: a review of contaminants and fish as biomonitors and analytical methodologies—the case of Senegal

Environmental Science and Pollution Research - Environmental pollution is one of the major problems facing human health, ecosystems, and biodiversity. This is particularly the case for water...     

The dust retention capacities of urban vegetation—a case study of Guangzhou, South China

Urban vegetation increasingly plays an important role in the improvement of the urban atmospheric environment. This paper deals with the dust retention capacities of four urban tree species (Ficus virens var. sublanceolata, Ficus microcarpa, Bauhinia blakeana, and Mangifera indica Linn) in Guangzhou. The dust-retaining capacities of four tree species are studied under different pollution intensities and for different seasons. Remote sensing imagery was used to estimate the total aboveground urban vegetation biomass in different functional areas of urban Guangzhou, information that was then used to estimate the dust-retaining capacities of the different functional areas and the total removal of airborne particulates in urban Guangzhou by foliage. The results showed that urban vegetation can remove dust from the atmosphere thereby improving air quality. The major findings are that dust retention, or capture, vary between the four species of tree studied; it also varied between season and between types of urban functional area, namely industrial, commercial/road traffic, residential, and clean areas. Dust accumulation over time was also studied and reached a maximum, and saturation, after about 24 days. The overall aboveground biomass of urban vegetation in Guangzhou was estimated to be 52.0?×?10⁵ t, its total leaf area 459.01 km², and the dust-retaining capacity was calculated at 8012.89 t per year. The present study demonstrated that the foliage of tree species used in urban greening make a substantial contribution to atmospheric dust removal and retention in urban Guangzhou.     

Dynamic water quality evaluation based on fuzzy matter–element model and functional data analysis,a case study in Poyang Lake

Environmental Science and Pollution Research - Comprehensively evaluating water quality with a single method alone is challenging because water quality evaluation involves complex, uncertain, and...     

Environmental and socioeconomic assessment of impacts by mining activities—a case study in the Certej River catchment,Western Carpathians,Romania

Background, aim and scope

In the region of the Apuseni Mountains, part of the Western Carpathians in Romania, metal mining activities have a long-standing tradition. These mining industries created a clearly beneficial economic development in the region. But their activities also caused impairments to the environment, such as acid mine drainage (AMD) resulting in long-lasting heavy metal pollution of waters and sediments. The study, established in the context of the ESTROM programme, investigated the impact of metal mining activities both from environmental and socioeconomic perspectives and tried to incorporate the results of the two approaches into an integrated proposition for mitigation of mining-related issues.

Study site

The small Certej catchment, situated in the Southern Apuseni Mountains, covers an area of 78 km². About 4,500 inhabitants are living in the basin, in which metal mining was the main economic sector. An open pit and several abandoned underground mines are producing heavy metal-loaded acidic water that is discharged untreated into the main river. The solid wastes of mineral processing plants were deposited in several dumps and tailings impoundment embodying the acidic water-producing mineral pyrite.

Methods

The natural science team collected samples from surface waters, drinking water from dug wells and from groundwater. Filtered and total heavy metals, both after enrichment, and major cations were analysed by inductively coupled plasma optical emission spectroscopy (ICP-OES). Major anions in waters, measured by ion chromatography, alkalinity and acidity were determined by titration. Solid samples were taken from river sediments and from the largest tailings dam. The latter were characterised by X-ray fluorescence and X-ray diffraction. Heavy metals in sediments were analysed after digestion. Simultaneously, the socioeconomic team performed a household survey to evaluate the perception of people related to the river and drinking water pollution by way of a logistic regression analysis.

Results and discussion

The inputs of acid mine waters drastically increased filtered heavy metal concentrations in the Certej River, e.g. Zn up to 130 mg L⁻¹, Fe 100 mg L⁻¹, Cu 2.9 mg L⁻¹, Cd 1.4 mgL⁻¹ as well as those of SO₄ up to 2.2 g L⁻¹. In addition, river water became acidic with pH values of pH 3. Concentrations of pollutant decreased slightly downstream due to dilution by waters from tributaries. Metal concentrations measured at headwater stations reflect background values. They fell in the range of the environmental quality standards proposed in the EU Water Framework Directive for dissolved heavy metals. The outflow of the large tailing impoundment and the groundwater downstream from two tailings dams exhibited the first sign of AMD, but they still had alkalinity.

Most dug wells analysed delivered a drinking water that exhibited no sign of AMD pollution, although these wells were a distance of 7 to 25 m from the contaminated river. It seems that the Certej River does not infiltrate significantly into the groundwater.

Pyrite was identified as the main sulphide mineral in the tailings dam that produces acidity and with calcite representing the AMD-neutralising mineral. The acid–base accounting proved that the potential acid-neutralising capacity in the solid phases would not be sufficient to prevent the production of acidic water in the future. Therefore, the open pits and mine waste deposits have to be seen as the sources for AMD at the present time, with a high long-term potential to produce even more AMD in the future.

The socioeconomic study showed that mining provided the major source of income. Over 45% of the households were partly or completely reliant on financial compensations as a result of mine closure. Unemployment was considered by the majority of the interviewed persons as the main cause of social problems in the area. The estimation of the explanatory factors by the logistic regression analysis revealed that education, household income, pollution conditions during the last years and familiarity with environmental problems were the main predictors influencing peoples’ opinion concerning whether the main river is strongly polluted. This model enabled one to predict correctly 77% of the observations reported. For the drinking water quality model, three predictors were relevant and they explained 66% of the observations.

Conclusions

Coupling the findings from the natural science and socioeconomic approaches, we may conclude that the impact of mining on the Certej River water is high, while drinking water in wells is not significantly affected. The perceptions of the respondents to pollution were to a large extent consistent with the measured results.

Recommendations and perspectives

The results of the study can be used by various stakeholders, mainly the mining company and local municipalities, in order to integrate them in their post-mining measures, thereby making them aware of the potential long-term impact of mining on the environment and on human health as well as on the local economy.

     

Spatial variations in the aeolian deposition of dust – the effect of a city: a case study in Be'er-Sheva,Israel

The effect of buildings on the dry deposition of dust particles was investigated in Be'er-Sheva, a desert city with about 140,000 inhabitants in southern Israel, and at two reference points in the surrounding rural area. The mineral and chemical composition of dust sampled at all sites was similar, reflecting the composition of the local loess soil, its likely origin. However, dust deposited in the traps set up in the vicinity of buildings in the city was significantly coarser than the dust which accumulated in similar traps at exposed sites in the countryside. The amount of dust (by weight) in the urban dust traps was on an average more than twice the amount deposited in the rural area. The differences in grain-size distribution and quantity of dust are attributed to the properties of the urban wind field and to various effects of human activity in the city.     

Exposure to phthalates in early pregnancy and the risk of fetal growth restriction: a nested case–control study in a Zhuang Chinese population

Environmental Science and Pollution Research - Phthalates (PAEs) are common endocrine disrupting chemicals (EDCs) that disrupt fetal development. The present study aimed to evaluate the effects of...     

Electric forces in aerosol filtration in fibrous and granular filters—a parametric study

A parametric study on the relative effect of various electrical forces on aerosol filtration in fibrous and granular filters is presented. The paper covers the engineering practical range of the electrical field intensity and dust particle sizes. Coulombic attraction has the widest range of application but other forces may dominate in some specific applications.     

Air quality measurements in urban green areas – a case study

The influence of traffic-induced pollutants (e.g. CO, NO, NO₂ and O₃) on the air quality of urban areas was investigated in the city of Essen, North Rhine-Westphalia (NRW), Germany. Twelve air hygiene profile measuring trips were made to analyse the trace gas distribution in the urban area with high spatial resolution and to compare the air hygiene situation of urban green areas with the overall situation of urban pollution. Seventeen measurements were made to determine the diurnal concentration courses within urban parks (summer conditions: 13 measurements, 530 30 min mean values, winter conditions: 4 measurements, 128 30 min mean values). The measurements were carried out during mainly calm wind and cloudless conditions between February 1995 and March 1996. It was possible to establish highly differentiated spatial concentration patterns within the urban area. These patterns were correlated with five general types of land use (motorway, main road, secondary road, residential area, green area) which were influenced to varying degrees by traffic emissions. Urban parks downwind from the main emission sources show the following typical temporal concentration courses: In summer rush-hour-dependent CO, NO and NO₂ maxima only occurred in the morning. A high NO₂/NO ratio was established during weather conditions with high global radiation intensities (K>800 W m⁻²), which may result in a high O₃ formation potential. Some of the values measured found in one of the parks investigated (Gruga Park, Essen, area: 0.7 km²), which were as high as 275 μg m⁻³ O₃ (30-min mean value) were significantly higher than the German air quality standard of 120 μg m⁻³ (30-min mean value, VDI Guideline 2310, 1996) which currently applies in Germany and about 20% above the maximum values measured on the same day by the network of the North Rhine–Westphalian State Environment Agency. In winter high CO and NO concentrations occur in the morning and during the afternoon rush-hour. The highest concentrations (CO=4.3 mg m⁻³, NO=368 μg m⁻³, 30-min mean values) coincide with the increase in the evening inversion. The maximum measured values for CO, NO and NO₂ do not, however, exceed the German air quality standards in winter and summer.     

Spatiotemporal distribution of water environmental capacity—a case study on the western areas of Taihu Lake in Jiangsu Province,China

Currently, the poor water quality in Taihu Lake is a major problem in China, so pollution control in the upstream areas has become a government priority. In Jiangsu Province, pollution emissions around the western areas of Taihu Lake, including Changzhou Municipality and Yixing City, need to be highly restricted, and calculating the water environmental capacity is important if pollution is to be reduced. In this study, 19 control units in these areas were established, and a 0-D mathematical model was used to calculate the water environmental capacity. For three important control units with important cross sections, a 1-D model was established to redress the results. Finally, the total maximum monthly loads of each control unit were obtained using temporal allocation principles. The results suggested that (1) the total pollution control of chemical oxygen demand was 58,894.2 tonnes per annum (t a^?1), with ammonia nitrogen, total nitrogen, and total phosphorus amounting to 3,808, 6,054.6, and 386.6 t a^?1, respectively; (2) water environmental capacity per unit water area in the ambient control units was smaller than that in the middle control units; and (3) the largest water environmental capacity was in June, and the smallest capacity was in December. The study provides important information for local governments, which will enable them to implement pollution control strategies that will improve the water quality in Taihu Lake.