Comparison of palladium and platinum in environmental matrices: Palladium pollution by automobile emissions?

A new type of automobile catalyst based on an active Pd/Rh-layer is presently being introduced into the European market. Accordingly, in order to establish baseline information, this work attempts to assess the magnitude of Pd emissions by automobile catalysts to date. Thus, a survey is presented on Pd and Pt levels detected in polluted environmental matrices (grass, soil, dust, sludges) as available from the literature. Additionally, Pd data measured by selective preconcentration/GF-AAS-detection in polluted grass, in a time series of sewage sludge ashes back to 1972, in dust, as well as in urban rain are presented. Since the data basis from the literature is partly inconsistent, the possible impact of different analytical attempts on the data is discussed. The relationship between Pt and Pd concentration from most of the results is between 5 and 10 (Pt/Pd). However, relations down to 0.04 are also reported, thus implying anthropogenic Pd input from additional sources.     

Synthesis of γ-Fe2O3/La/Bi2WO6 composites for enhanced visible light-driven photocatalytic degradation of tetracycline hydrochloride

Environmental Science and Pollution Research - γ-Fe2O3/La/Bi2WO6 heterojunction composites have been successfully synthesized by simple and convenient hydrothermal method. The photocatalytic...     

The penetration of formulated guthion® spray through selected fabrics

Abstract

A technique for comparing pesticide penetration through fabric was devised. It involved passing fabric swatches through a controlled spray system and measuring the pesticide residue transferring on and through the tested fabric. Six variations in fabric were selected for testing: 100% cotton woven chambray,

Scotch‐guard^® treated chambray, Tyvek^® , Crowntex^® , and two variations of Gore Tex^®. Guthion^® (azinphos‐methyl) was chosen as the insecticide for controlled use in this experiment because of its widespread use and relatively high toxicity.

Gas Chromatographie analysis of the amount of Guthion^® transferred through the outer fabric was made by the use of analysis of variance (ANOVA) and Duncan's multiple range test. The ANOVA for experiment replication showed no significant difference among the replications of each fabric. The treatment ANOVA was highly significant at the 0.01 level.

Duncan's multiple range test further analyzed the differences in the treatment, and three groups were found to be significantly different from each other. The two types of Gore Tex^®, Tyvek^® and Crowntex^® comprised the group permitting the least penetration. Scotch‐guard^® treated chambray followed, and untreated chambray allowed the greatest penetration.     

The appreciation of mineral element accumulation level in some herbaceous plants species by ICP–AES method

Introduction  

From the metallurgic industry zone of Dambovita County, we harvested and analyzed seven herbaceous plants species (Lolium perenne, Festuca pratensis, Stipa capillata, Agrostis alba, Cynodon dactylon, Luzula campestris, and Agrostis tenuis) to establish the heavy metal accumulation levels in these species.     

The Onset of Electrical Breakdown in Dust Layers: I,Microsparking Described by Paschen’s Law

The onset of electrical breakdown in dust layers has been studied for hand-deposited dust layers in a parallel plate geometry. It was found that the breakdown was an ordinary electron avalanche process originating in voids within the dust layer and obeying Paschen’s Law. The size of voids where breakdown occurs was in the range of 10 to 20 μm for the layers used. The distribution of particle sizes in a sample Influences its breakdown through changes in the average void dimension where breakdown takes place. Water vapor in the test environment, which affects the electrical conduction mechanism prior to breakdown, lowered the average electric field required to initiate breakdown. Moderate compaction of the sample had little or no effect on its breakdown behavior.     

The key role of hydrophobicity in the determination of pharmaceuticals by liquid chromatography–electrospray ionization-mass spectrometry under the interference of natural organic matter

Environmental Science and Pollution Research - The determination of trace-level pharmaceuticals in water is generally performed using liquid chromatography combined with mass spectrometry, which is...     

Sample integrity of trace level volatile organic compounds in ambient air stored in SUMMA® polished canisters

Sets of new and used SUMMA® polished stainless steel canisters were tested for storage stability of volatile organic compounds (VOCs). Evacuated canisters were filled at a controlled rate with ambient air containing added concentrations of 15 VOCs (14 chlorinated, one brominated) at < 2 ppbv. Concentrations of VOCs in each canister were then periodically determined during 7-day or 30-day storage periods using simultaneous flame ionization and electron capture detection. No initial decreases in concentrations of target compounds were observed. Statistical analysis of data showed that the relative standard deviation of concentrations of most VOCs in each canister set was 10% or less during the storage periods. For the 7-day tests, the mean change in concentration per day was within ± 3.2 %. These canisters appear suitable as an alternative to other sampling techniques, at least for most of the compounds tested here.     

The Emergence of Black Carbon as a Super-Sorbent in Environmental Chemistry: The End of Octanol?

The distribution of aromatic contaminants between environmental solids and water solution reflects both absorption by the organic matrix (organic carbon, OC) and adsorption to black carbon (BC). In many instances, adsorption to BC dominates the interaction between aromatic contaminants and environmental solids. This holds especially true for the pyrogenically produced PAHs and PCDD/Fs, but also for the industrially produced PCBs and PCNs. In the future, research will need to surface-normalize the adsorption onto BC surfaces. One of the key questions to be addressed is the relative distribution and availability of contaminants associated with OC and BC fractions in environmental solids.     

Internalization of SiO2 nanoparticles by alveolar macrophages and lung epithelial cells and its modulation by the lung surfactant substitute Curosurf®

Because of an increasing exposure to environmental and occupational nanoparticles (NPs), the potential risk of these materials for human health should be better assessed. Since one of the main routes of entry of NPs is via the lungs, it is of paramount importance to further characterize their impact on the respiratory system. Here, we have studied the uptake of fluorescently labeled SiO₂ NPs (50 and 100 nm) by epithelial cells (NCI-H292) and alveolar macrophages (MHS) in the presence or absence of pulmonary surfactant. The quantification of NP uptake was performed by measuring cell-associated fluorescence using flow cytometry and spectrometric techniques in order to identify the most suitable methodology. Internalization was shown to be time and dose dependent, and differences in terms of uptake were noted between epithelial cells and macrophages. In the light of our observations, we conclude that flow cytometry is a more reliable technique for the study of NP internalization, and importantly, that the hydrophobic fraction of lung surfactant is critical for downregulating NP uptake in both cell types.     

Measurements of JNO3− in snow by nitrate-based actinometry

Chemical actinometry was used to measure nitrate photolysis rate coefficients, J_NO3⁻, on and in snowpack at Summit, Greenland. Sealed glass tubes containing nitrate and a hydroxyl radical trapping system were buried in snow and exposed for between 2 and 24 h. Average J_NO3⁻ values for 2-h midday exposures in early June on surface snow were 10–14×10⁻⁷ s⁻¹. Averages over 24 h were 3.5–4.5×10⁻⁷ s⁻¹. These values reflect the integrated photon flux and also any variation of the nitrate photolysis rate with temperature. Attenuation of J_NO3⁻ within the firn was 0.03–0.04 cm⁻¹ for 24-h exposures and 0.08 cm⁻¹ for a 2-h exposure. Different attenuation coefficients may relate to differential light penetration due to changes in sun angle over the course of 24 h.     

Elucidation of the upper pathway of alicyclic musk Romandolide® degradation in OECD screening tests with activated sludge

The degradation of Romandolide® ([1-(3′,3′-dimethyl-1′-cyclohexyl)ethoxycarbonyl] methyl propanoate), a synthetic alicyclic musk, by activated sludge inocula was investigated using both the manometric respirometry test OECD 301F and the CO₂ evolution test. In addition to measuring its biodegradability, key steps of the upper part of the metabolic pathway responsible for Romandolide® degradation were identified using extracts at different time points of incubation. Early metabolism of Romandolide® yielded ester hydrolysis products, including Cyclademol® (1-(3,3-dimethylcyclohexyl)ethanol). The principal metabolites after 31 days were identified as 3,3-dimethyl cyclohexanone and 3,3-dimethyl cyclohexyl acetate. Formation of 3,3-dimethyl cyclohexanone from Cyclademol® by sludge was confirmed in subsequent experiments using Cyclademol® as a substrate, indicating the involvement of an oxygen insertion reminiscent of a Baeyer–Villiger oxidation. Further mineralization of 3,3-dimethyl cyclohexanone was also confirmed in subsequent studies. Three steps were thus required for complete biodegradation of the alicyclic musk: (1) successive ester hydrolyses leading to the formation of Cyclademol® with concomitant degradation of the resulting acids, (2) conversion of Cyclademol® into 3,3-dimethyl cyclohexanone, and (3) further mineralization via ring cleavage.     

Rain‐washing of foliar deposits of Dimilin®WP‐25 formulated in four different carrier liquids

Abstract

Dimilin^® WP‐25, a wettable powder formulation of diflubenzuron (DFB) [1‐(4‐chlorophenyl)‐3‐(2,6‐difluorobenzoyl) urea], was formulated in four different carrier liquids, viz., water; a light petroleum paraffinic oil, ID 585; a heavy paraffinic oil, Sunspray^® 7N; and a 1:2 mixture of a light petroleum aromatic solvent (Cyclosol^® 63) and canola oil; to provide four end‐use mixtures, Dim‐W, Dim‐585, Dim‐7N and Dim‐Cy‐C respectively, each containing 28 g of DFB per litre. Balsam fir branch tips clipped from greenhouse‐grown seedlings, and sugar maple branch tips clipped from field‐grown young trees, were exposed to uniform‐sized droplets (ranging in diameters from 135 to 190 μm) of the four end‐use mixtures which were atomized using a monodispersed droplet generator. Droplets were collected on the fir and maple branch tips and the initial residue per g fresh weight of foliage was determined by high‐performance liquid chromatography (HPLC). The branch tips were exposed to cumulative rainfall of 3, 6 and 10 mm at an intensity of 5 mm/h and at time intervals of 1, 12, 36 and 72 h after DFB treatment, to test the influence of ‘ageing’ of foliar residues on rainfastness. Foliar samples were collected for residue determination just before the onset of rainfall, and at 0.5 h post‐rain. DFB was quantified by the HPLC method. In the case of fir foliage, the Dim‐W formulation was the most susceptible to rain‐washing and the rainfastness did not increase with the ageing period of foliar deposits. In contrast, the three oil‐based mixtures showed greater rainfastness depending upon the carrier liquid and the ageing period. Rainfastness decreased in the order of Dim‐Cy‐C > Dim‐7N > Dim‐585 > Dim‐W. In contrast, the data on maple foliage indicated that the ageing of deposits increased the rainfastness of all the 4 end‐use mixtures. Dim‐585 was the most susceptible to rain washing, and rainfastness decreased in the order of Dim‐W > Dim‐Cy‐C > Dim‐7N > Dim‐585.     

The role of tryptophan in don‐induced feed rejection

Abstract

Deoxynivalenol (DON, vomitoxin) commonly produced by Fusarium fungi can alter feeding behaviour of pigs and other farm animals. The effects of dietary tryptophan (TRP, precursor of brain amine serotonin) in combination with DON were examined in mice to determine if TRP can modulate DON toxicity. Results indicated that brain TRP can be influenced by dietary TRP, but no evidence of TRP potentiating DON toxicity was observed. Higher TRP levels likely induced amino acid imbalance leading to weight gain suppression.     

Decomposition of NO in automobile exhaust by plasma–photocatalysis synergy

The combination of plasma discharge and TiO₂ photocatalysis exhibits high performances in the removal of nitrogen monoxide (NO). This article is aimed at elucidating the relationships between NO decomposition efficiency and various experimental parameters, including voltages, humidity and temperature. The experimental results indicate that the efficiency of NO removal by synergic plasma-catalyst coupling is significantly higher than plasma only or photocatalyst only systems. Moreover, the NO removal efficiency improves with the increase of applied voltage. Meanwhile, a higher humidity results in a reduced number of electron–hole pairs at the surface of TiO₂ photocatalyst, leading to lower synergic purification efficiencies. Finally, the efficiency of NO removal is raised with the increase of temperature due to the fact that the adsorption of NO and water by nano-TiO₂ is affected by environmental temperature.     

Comparison of atmospheric concentrations of currently used pesticides between urban and rural areas during intensive application period in Alsace (France) by using XAD-2® based passive samplers

XAD-2® passive samplers (PAS) have been exposed simultaneously for 14 days on two sites, one rural and one urban, situated in Alsace (East of France) during intensive pesticides application in agriculture (between March and September). PAS have been extracted and analyzed for current-used pesticides and lindane with an analytical method coupling accelerated solvent extraction (ASE), solid-phase microextraction (SPME) and GC/MS/MS. Results show the detection of pesticides is linked to the period of application and spatial and temporal variabilities can be observed with these PAS during the selected sampling period. The spatial and temporal variability is comparable to the one previously observed by comparing data obtained with PAS with data from Hi.-Vol. samplers in an urban area. Sampling rates were calculated for some pesticides and values are comparable to the data already available in the literature. From these sampling rates, concentrations in ng m^?3 of pesticides in PAS have been calculated and are in the same order of magnitude as those obtained with Hi.Vol. sampling during the same period of time.     

The structure of the fire fighting foam surfactant Forafac®1157 and its biological and photolytic transformation products

For several decades, perfluorooctane sulfonate (PFOS) has widely been used as a fluorinated surfactant in aqueous film forming foams used as hydrocarbon fuel fire extinguishers. Due to concerns regarding its environmental persistence and toxicological effects, PFOS has recently been replaced by novel fluorinated surfactants such as Forafac®1157, developed by the DuPont company. The major component of Forafac®1157 is a 6:2 fluorotelomer sulfonamide alkylbetaine (6:2 FTAB), and a link between the trade name and the exact chemical structure is presented here to the scientific community for the first time. In the present work, the structure of the 6:2 FTAB was elucidated by ¹H, ¹³C and ¹⁹F nuclear magnetic resonance spectroscopy and high-resolution mass spectrometry. Moreover, its major metabolites from blue mussel (Mytilus edulis) and turbot (Scophthalmus maximus) and its photolytic transformation products were identified. Contrary to what has earlier been observed for PFOS, the 6:2 FTAB was extensively metabolized by blue mussel and turbot exposed to Forafac®1157. The major metabolite was a deacetylated betaine species, from which mono- and di-demethylated metabolites also were formed. Another abundant metabolite was the 6:2 fluorotelomer sulfonamide. In another experiment, Forafac®1157 was subjected to UV-light induced photolysis. The experimental conditions aimed to simulate Arctic conditions and the deacetylated species was again the primary transformation product of 6:2 FTAB. A 6:2 fluorotelomer sulfonamide was also formed along with a non-identified transformation product. The environmental presence of most of the metabolites and transformation products was qualitatively demonstrated by analysis of soil samples taken in close proximity to an airport fire training facility.     

The chemistry of carbonyl compounds in the atmosphere—A review

Carbonyl compounds are very important for the trophospheric physico-chemistry because they are the result of the first photo-oxidation stage of almost all organic compounds and they are the essential originators of the free radicals. In the present review we make a synthesis of the studies on the carbonyl compounds chemistry in the trophosphere by successively examining: measurement methods in the trophosphere, sources of primary carbonyl compounds, formation of secondary carbonyl compounds in the atmosphere, reactivity of carbonyl compounds in the atmosphere.     

The state of ambient air quality in Pakistan—a review

Background and purpose  

Pakistan, during the last decade, has seen an extensive escalation in population growth, urbanization, and industrialization, together with a great increase in motorization and energy use. As a result, a substantial rise has taken place in the types and number of emission sources of various air pollutants. However, due to the lack of air quality management capabilities, the country is suffering from deterioration of air quality. Evidence from various governmental organizations and international bodies has indicated that air pollution is a significant risk to the environment, quality of life, and health of the population. The Government has taken positive steps toward air quality management in the form of the Pakistan Clean Air Program and has recently established a small number of continuous monitoring stations. However, ambient air quality standards have not yet been established. This paper reviews the data being available on the criteria air pollutants: particulate matter (PM), sulfur dioxide, ozone, carbon monoxide, nitrogen dioxide, and lead.