Quantitative structure-toxicity relationships of organophosphorous pesticides to fish (Cyprinus carpio)

This study was conducted to determine the relationships between 1381 chemical and structural parameters of 43 organophosphorus pesticides (OPs) and their toxicity to fish, Cyprinus carpio, using ChemOffice 8.03 and Dragon 2.1. By multivariate linear regression and intervariable regression analyses, various equations have been derived to calculate the lethal toxicity value, LC(50), for 43 OPs found in fish with different levels of toxicity. Results show that for all selected OPs, especially those of low toxic OPs (LC(50)< 2.5 mM), the equation, LC(50) = 56.259 - 13.071 lg K(ow)+17.510 MATS8P-17.455 Mor24u - 0.085 MW + 1.706 (lg K(ow))(2) + 2.306 (Mor14e)(2) + 6.849 Mor20 m (n = 43, F = 36.815, r = 0.942, r(adj)(2) = 0.862, SE = 2.899, p < 10(-6)), could account for 86.2% of the variability of the toxic effect. The steric and electronic characteristics and the hydrophobicity of OPs, in particular, are among the most important parameters determining the toxicity of OPs to fish. For the OPs with high toxicity, different structural parameters were introduced into the following two equations: LC(50)=3.795-1.195 (H1p)(2)-0.037 U-2.225 MATS3v-19.593 Tcon (n = 16, F = 56.820, r = 0.977, r(adj)(2) = 0.937, SE = 0.143, p < 10(-6)), where LC(50) is less than 2.5 mM, and LC(50) = 0.341-0.561 (HOMA)(2) + 0.231 HOMA (n = 3,r(adj)(2) = 1), where LC(50) is less than 0.3 mM. These results suggest that chemical and structural parameters could be useful in modeling chemical reactivity within homologous series of OP compounds and elucidating possible mechanisms associated with different levels of toxicity to fish.     

The toxicity of antibiotic agents to the luminescent bacterium Vibrio fischeri.

Despite their common use the fate and effects of antibiotics in the environment are largely unknown. These compounds may enter the environment through different pathways, resulting in the contamination of waste water or fresh water, where bacteria are most likely the primarily affected organisms. In this paper the toxicity of several drugs, reflecting the most important groups of antibiotics and chemotherapeutics, towards Vibrio fischeri are presented. The chronic bioluminescence inhibition assay with Vibrio fischeri is shown to be sensitive against many of the high volume antibiotics used for veterinary purposes and in aquaculture. Thus the assay may be a valuable tool for an effects assessment and biomonitoring of these xenobiotics. The available data for both parts of the risk assessment procedure--exposure assessment and effects assessment--have to be regarded as insufficient for most antibiotics. When the available data about environmental concentrations of antibiotics are compared with their toxicity towards Vibrio fischeri, direct effects on natural microbial communities are to be expected.     

多元逐步回归对苯胺类化合物结构与毒性模型研究

采用Chemoffice6．0中MOPAC-AMl量子化学法计算了24种苯胺类化合物的6种量子化学结构参数．其中取17个化合物作为样本集对-lgEC50进行多元逐步回归分析．得到最佳方程．经自由度校正的回归系数R=0．985。应用所建立的QSAR模型验证了苯胺类化合物的EC50值．并通过“Jackknife”中的逐一抽取法进行模型检验,得出该模型具有很好的稳定性．平均残差仅为0．05个对数单位．小于文献值。经过7个预测样本对该模型进行验证．结果表明．该模型具有很好的预测能力。同时分析了苯胺类化合物的毒性机理。     

Automated color correction method for Vibrio fischeri toxicity test. Comparison of standard and kinetic assays.

We demonstrate in this study that the toxicity of solid and highly colorful samples can be measured with kinetic bioassay using luminescent bacterium Vibrio fischeri. The Flash assay, named after the test protocol, is performed with a tube luminometer. In this method, each sample acts as a reference for itself, and therefore, the color correction is possible with minimal hands-on-time. The bacteria are dispensed into the sample and the signal is recorded continuously. The maximum signal received after immediately dispensing is compared to the signal after an incubation period. With many chemicals, the toxic effects are obtained after a very short contact time. However, different chemicals have different modes of toxicity. Thus, kinetic data from sample analyses after 15 or 30 min for this bacterium gives an additional dimension for obtaining reliable results. The performance of the test was compared to the standardized photobacteria test protocol with reference chemicals. The repeatability of the test was excellent. The coefficient of variation was normally below 1% with 10 replicates.     

MOA-based linear and nonlinear QSAR models for predicting the toxicity of organic chemicals to Vibrio fischeri

Environmental Science and Pollution Research - Risk assessment of pollutants to humans and ecosystems requires much toxicological data. However, experimental testing of compounds expends a large...     

Quantitative structure-activity relationships for toxicity and genotoxicity of halogenated aliphatic compounds: wing spot test of Drosophila melanogaster

Halogenated aliphatic compounds were evaluated for toxic and genotoxic effects in the somatic mutation and recombination test employing Drosophila melanogaster. The tested chemicals included chlorinated, brominated and iodinated; mono-, di- and tri-substituted; saturated and unsaturated alkanes: 1,2-dibromoethane, 1-bromo-2-chloroethane, 1-iodopropane, 2,3-dichloropropene, 3-bromo-1-propene, epibromohydrin, 2-iodobutane, 3-chloro-2-methylpropene, 1,2,3-trichloropropane, 1,2-dichloroethane, 1,2-dichlorobutane, 1-chloro-2-methylpropane, 1,3-dichloropropane, 1,2-dichloropropane, 2-chloroethymethylether, 1-bromo-2-methylpropane and 1-chloropentane. N-methyl-N-nitrosourea served as the positive and distilled water as the negative control. The set of chemicals for the toxicological testing was selected by the use of statistical experiment design. Group of unsaturated aliphatic hydrocarbons were generally more toxic than saturated analogues. The genotoxic effect was observed with 14 compounds in the wing spot test, while 3 substances did not show any genotoxicity by using the wing spot test at 50% lethal concentration. The highest number of wing spots was observed in genotoxicity assay with 1-bromo-2-chloroethane, 1,2-dichloroethane, 1,2-dibromoethane and 1-iodopropane. Nucleophilic superdelocalizability calculated by quantum mechanics appears to be a good parameter for prediction of both toxicity and genotoxicity effects of halogenated aliphatic compounds.     

Quantitative structure-toxicity relationship study of lethal concentration to tadpole (Bufo vulgaris formosus) for organophosphorous pesticides

In the present study more than 1,000 structural parameters of 41 organophosphorus pesticides (OPs) were calculated using the software ChemOffice 8.03 and Dragon 2.1. Then, with multivariate linear regression and best subset regression analyses, different equations were derived to calculate the lethal toxicity, LC(50), for these 41 organophosphorous pesticides found in tadpoles (Bufo vulgaris formosus). An equation was developed for all selected OPs, especially those with relatively low toxicity levels (LC(50)>4.5mM) that accounted for 89.09% of the variability in the toxic effect. The equation indicated that the main contributions to OPs toxicity with tadpoles were the electrostatic contribution qH(+) (maximum net positive H atomic charge), spatial autocorrelation (MATS7 m) and hydrophobicity (lgK(ow)), with the two former being the most important parameters. For OPs with high toxicity, however, different structural parameters were introduced. The following equation was developed with LC(50)<4.5mM. These equations implied that with different levels of toxicity there could have different mechanisms in the tadpole. Furthermore, the results showed that molecular structural parameters had a particular value in modeling chemical reactivity within a homologous series of compounds.     

Toxicity evaluation of reactive dyestuffs, auxiliaries and selected effluents in textile finishing industry to luminescent bacteria Vibrio fischeri

The toxicity of 17 selected process effluents, 11 reactive dyestuffs and 8 auxiliaries from a textile dyeing and finishing mill in Ayazaga, Istanbul, Turkey was evaluated by bioluminescence test using bacteria Vibrio fischeri in LUMIStox 300. The EC20 and EC50 for auxiliaries, the EC20 for dyestuffs were determined. For selected process effluents GL-values, the dilution level at which a wastewater sample causes less than 20% inhibition, were examined. Our results demonstrate that the toxicity assessment with luminescent bacteria is effective and of practical use for chemicals applied in textile finishing industry with the limitation of the deep dark-colored dye bath samples and for the related effluents. Inhibition effects of numerous dyestuffs as well as auxiliaries to luminescent bacteria differed considerably with a range 5-600 mg l(-1) for EC20 and 9-6930 mg l(-1) for EC50, respectively. Among 17 effluents, I sample exhibited high toxicity (GL = 100), 7 showed moderate toxicity (GL = 12-32), and 9 had a GL-value <10 indicating a low or no toxicity.     

Toxicity of nanosized and bulk ZnO, CuO and TiO2 to bacteria Vibrio fischeri and crustaceans Daphnia magna and Thamnocephalus platyurus

As the production of nanoparticles of ZnO, TiO2 and CuO is increasing, their (eco)toxicity to bacteria Vibrio fischeri and crustaceans Daphnia magna and Thamnocephalus platyurus was studied with a special emphasis on product formulations (nano or bulk oxides) and solubilization of particles. Our innovative approach based on the combination of traditional ecotoxicology methods and metal-specific recombinant biosensors allowed to clearly differentiate the toxic effects of metal oxides per se and solubilized metal ions. Suspensions of nano and bulk TiO2 were not toxic even at 20 g l(-1). All Zn formulations were very toxic: L(E)C50 (mg l(-1)) for bulk ZnO, nanoZnO and ZnSO4.7H2O: 1.8, 1.9, 1.1 (V. fischeri); 8.8, 3.2, 6.1 (D. magna) and 0.24, 0.18, 0.98 (T. platyurus), respectively. The toxicity was due to solubilized Zn ions as proved with recombinant Zn-sensor bacteria. Differently from Zn compounds, Cu compounds had different toxicities: L(E)C50 (mg l(-1)) for bulk CuO, nano CuO and CuSO4: 3811, 79, 1.6 (V. fischeri), 165, 3.2, 0,17 (D. magna) and 95, 2.1, 0.11 (T. platyurus), respectively. Cu-sensor bacteria showed that toxicity to V. fischeri and T. platyurus was largely explained by soluble Cu ions. However, for Daphnia magna, nano and bulk CuO proved less bioavailable than for bacterial Cu-sensor. This is the first evaluation of ZnO, CuO and TiO2 toxicity to V. fischeri and T. platyurus. For nano ZnO and nano CuO this is also a first study for D. magna.     

Halogenated organic contaminants and mercury in northern fulmars (Fulmarus glacialis): levels, relationships to dietary descriptors and blood to liver comparison

The northern fulmar (Fulmarus glacialis) is an interesting candidate for the study of patterns and levels of halogenated organic contaminants (HOCs) since they accumulate high levels of certain HOCs. In the present study we characterized a suite of established and novel HOCs in northern fulmars breeding on Bj?rn?ya in the Norwegian Arctic. A comparison between blood and liver HOC levels was made, and the levels were related to the ratios of heavier to lighter stable isotopes of nitrogen (15)N/(14)N (delta(15)N) and carbon (13)C/(12)C (delta(13)C) in muscle. A significant difference in congener patterns between blood and liver was found. The delta(13)C was not related to HOCs, neither in liver nor in blood. Weak correlations were found between delta(15)N and liver HOC levels. The 2,3,7,8-tetrachlorodibenzo-p-dioxin toxic equivalents (TEQs) in northern fulmars were well above thresholds for reproductive effects in seabirds.     

Quantitative structure-activity relationships for polycyclic aromatic hydrocarbons: Correlation between molecular connectivity,physico-chemical properties,bioconcentration and toxicity in Daphnia pulex

High correlation coefficients (r = 0.9444 – 0.9996) were calculated for the linear one-parameter correlation between molecular weight, molecular connectivity indices, HPLC and TLC retention indices, partition coefficients between n-octanol or sediment and water, and bioconcentration factors or lethal concentrations in Daphnia Pulex of unsubstituted polycyclic aromatic hydrocarbons.     

Quantitative structure-activity relationships for the inhibition toxicity to root elongation of Cucumis sativus of selected phenols and interspecies correlation with Tetrahymena pyriformis

The comparative toxicities of selected phenols to higher plants Cucumis sativus were measured and the negative logarithm molar concentration of the root elongation median inhibition (IRC50) were derived. Quantitative structure-activity relationships (QSARs) were developed to explore the toxicity influencing factors and for predictive purpose. The toxicity data, fell into two classes: polar narcosis and bio-reactive. For polar narcotic phenols, a highly significant two-parameter QSAR based on 1-octanol/water partition coefficient (logKow) and energy of the lowest unoccupied orbital (E(lumo)) was derived (IRC50 = 0.77 log Kow - 0.39E(lumo) + 2.36 n = 22 r2 = 0.89). The five bio-reactive chemicals proved to show elevated toxicity due to their typical substructure involved diverse reactive mechanisms. In an effort to model all chemicals, a robust multiple-variable QSAR combining logKow, E(lumo) and Qmax, the most negative net atomic charge, was developed (IRC50 = 0.65 logKow - 0.72E(lumo) + 0.23Qmax + 2.81 n = 27 r2 = 0.94), indicating that hydrophobicity, electrophilicity and hydrogen bond interaction contribute mainly to the phytotoxicity. The toxicological data was compared with Tetrahymena pyriformis 2-d population growth inhibition toxicity (IGC50) and excellent interspecies correlations were observed both for the polar narcotics and for five reactive chemicals (for polar narcotics: IRC50 = 0.95IGC50 + 1.07 n = 16 r2 = 0.89; for bio-reactive chemicals: IRC50 = 0.98IGC50 + 2.19 n = 5 r2 = 0.97; and for all: IRC50 = 0.93IGC50 + 1.63 n = 21 r2 = 0.87). This suggested that T pyriformis toxicity could serve as a surrogate of C. sativus toxicity for phenols and interspecies correlation also could be established for reactive chemicals.     

Modeling alkene chemistry using condensed mechanisms for conditions relevant to southeast Texas,USA

Alkenes are important in photochemical smog formation in southeast Texas due to their high emissions, especially from industrial sources in and around Houston, and their high reactivities. Therefore, properly characterizing the chemistry of alkenes in condensed mechanisms used in regional photochemical models is important in understanding the formation of ozone and other photochemical air pollutants in Houston. The performance of three versions of the SAPRC condensed chemical mechanism family, for predicting ozone and radical formation, was compared. Simulations were compared to environmental chamber data and ambient data. The analyses showed that separately modeling individual alkenes reactions (especially propene for southeast Texas) has the potential to lead to more accurate simulations of alkene chemistry. Caution must be exercised in un-lumping, however. Testing with different formulations of the 1-butene + O₃ reaction demonstrated the complexity and interconnectedness in choices of stoichiometric parameters for un-lumped species and the extent to which lumped mechanisms are un-lumped.     

Three-dimensional, quantitative-structure-property-relationship study of aqueous solubility for phenylsulfonyl carboxylates using comparative-molecular-field analysis and comparative-molecular-similarity-indices analysis.

With both the comparative-molecular-field analysis (CoMFA) and the comparative-molecular-similarity-indices analysis (CoMSIA), the paper describes two five-component, three-dimensional, quantitative-structure-property-relationship (3D-QSPR) models for the aqueous solubility logSw (Sw, mol x L(-1)) of 52 phenylsulfonyl carboxylates. Two models yield the leave-one-out cross-validated correlation coefficient q2 values 0.851 and 0.821, and the conventional correlation coefficient r2 values 0.963 and 0.929, respectively. The achievement of high q2 and r2 values of the CoMFA model indicates the significance of correlation of steric and electrostatic fields with the aqueous solubility. The key features in the CoMFA contour maps are critical to trace the important properties and gain insight to the solvation mechanism of tested compounds. The quality of CoMSIA model is slightly lower than that of CoMFA in terms of q2 and r2 values. Not requiring molecular superposition, CoMSIA may be faster than CoMFA in data processing.     

Laboratory and field evaluation of measurement methods for one-hour exposures to O3, PM2.5, and CO.

While researchers have linked acute (less than 12-hr) ambient O3, PM2.5, and CO concentrations to a variety of adverse health effects, few studies have characterized short-term exposures to these air pollutants, in part due to the lack of sensitive, accurate, and precise sampling technologies. In this paper, we present results from the laboratory and field evaluation of several new (or modified) samplers used in the "roll-around" system (RAS), which was developed to measure 1-hr O3, PM2.5, and CO exposures simultaneously. All the field evaluation data were collected during two sampling seasons: the summer of 1998 and the winter of 1999. To measure 1-hr O3 exposures, a new active O3 sampler was developed that uses two nitrite-coated filters to measure O3 concentrations. Laboratory chamber tests found that the active O3 sampler performed extremely well, with a collection efficiency of 0.96 that did not vary with temperature or relative humidity (RH). In field collocation comparisons with a reference UV photometric monitor, the active O3 sampler had an effective collection efficiency ranging between 0.92 and 0.96 and a precision for 1-hr measurements ranging between 4 and 6 parts per billion (ppb). The limits of detection (LOD) of this method were 9 ppb-hr for the chamber tests and approximtely 16 ppb-hr for the field comparison tests. PM2.5 and CO concentrations were measured using modified continuous monitors--the DustTrak and the Langan, respectively. A size-selective inlet and a Nafion dryer were placed upstream of the DustTrak inlet to remove particles with aerodynamic diameters greater than 2.5 microm and to dry particles prior to the measurements, respectively. During the field validation tests, the DustTrak consistently reported higher PM2.5 concentrations than those obtained by the collocated 12-hr PM2.5 PEM samples, by approximately a factor of 2. After the DustTrak response was corrected (correction factor of 2.07 in the summer and 2.02 in the winter), measurements obtained using these methods agreed well with R2 values of 0.87 in the summer and 0.81 in the winter. The results showed that the DustTrak can be used along with integrated measurements to measure the temporal and spatial variation in PM2.5 exposures. Finally, during the field validation tests, CO concentrations measured using the Langan were strongly correlated with those obtained using the reference method when the CO levels were above the LOD of the instrument [approximately 1 part per million (ppm)].     

Acute toxicity tests on the freshwater isopod, Asellus aquaticus using FeSO4. 7H2O, with special reference to techniques and the possibility of intraspecific variation

Techniques are described for assessing the toxicity of Fe(II), an important component of the effluent from mines, to the freshwater isopod, Asellus aquaticus. These techniques either involve buffer systems or working at low pH. Both techniques indicate that A. aquaticus is very tolerant of Fe(II). Furthermore, the low-pH technique suggests that animals from sites exposed to mine-waste pollution are more tolerant than those from sites not so exposed. This difference is masked in the buffer experiments, possibly due to the formation of less toxic buffer-Fe(II) complexes.