Black carbon aerosols in urban air in South Asia

We report data from a yearlong (2006–2007) study of black carbon concentrations ([BC]) measured at 5-min intervals with an Aethalometer in Karachi, Pakistan. Daily mean [BC] varied from about 1 to 15 μg m^?3. However, short-term spikes exceeding 40 μg m^?3 were common, occurring primarily during the morning and evening rush-hour periods. The [BC] values were highest during November through February, ～10 μg m^?3, and lowest during June through September, ～2 μg m^?3. Diurnal, seasonal, and day-of-the-week trends are discussed. It is demonstrated that these trends are strongly affected by meteorological patterns. A simple expression is applied to the concentration profiles to separate the effects of meteorological conditions and elucidate the underlying emissions patterns. Daily emissions varied from 14,000 to 22,000 kg of BC per day. When integrated over the year emissions for Karachi Proper were estimated at 6.7 kilometric tons per year and emissions for greater Karachi were 17.5 kilometric tons per year. Folding in the populations of each area yields BC emissions of 0.74 and 1.1 kg per person per year, respectively. Applying the model to previously collected data at Lahore, Pakistan yields emissions during November–January that are around a factor of two higher than those in Karachi, but because the BC measurements in Lahore covered only three months, no estimates of annual emissions were attempted. Given the large populations of these cities the local health impact from PM alone is expected to be severe but because of the high [BC] emissions the impact on the global climate may be equally significant.     

Priorities for Improving the Scientific Foundation of Conservation Policy in North America

Abstract:  The Society for Conservation Biology (SCB) can enhance conservation of biodiversity in North America by increasing its engagement in public policy. Toward this end, the North America Section of SCB is establishing partnerships with other professional organizations in order to speak more powerfully to decision makers and taking other actions—such as increasing interaction with chapters—geared to engage members more substantively in science-policy issues. Additionally, the section is developing a North American Biodiversity Blueprint, which spans the continental United States and Canada and is informed by natural and social science. This blueprint is intended to clarify the policy challenges for protecting continental biodiversity, to foster bilateral collaboration to resolve common problems, and to suggest rational alternative policies and practices that are more likely than current practices to sustain North America's natural heritage. Conservation scientists and practitioners can play a key role by drawing policy makers' attention to ultimate, as well as proximate, causes of biodiversity decline and to the ecological and economic consequences of not addressing these threats.     

Transcriptome analysis of Plantago major as a phytoremediator to identify some genes related to cypermethrin detoxification

Environmental Science and Pollution Research - Cypermethrin (CYP) is a toxic manmade chemical compound belonging to pyrethroid insecticides contaminating the environment. Plantago major (PM) has...     

The COVID-19 pandemic: prediction study based on machine learning models

Environmental Science and Pollution Research - COVID-19 was first discovered in Wuhan, China in December 2019. It is one of the worst pandemics in human history. Recent studies reported that...     

Lung-deposited dose of particulate matter from residential exposure to smoke from wood burning

Environmental Science and Pollution Research - Residential settings are of utmost importance for human exposure, as it is where people spend most of their time. Residential wood combustion is a...     

Health implications of radon distribution in living rooms and bedrooms in U.K. dwellings--a case study in Northamptonshire

Environmental radon exposure of residents of domestic premises in the United Kingdom (UK) and elsewhere in Europe is estimated on the basis of the measured radon concentrations in, and the relative occupancies of, the principal living room and bedroom. While studies on radon concentration variability in the individual units in apartment blocks in various countries have been described, little data has been reported on variability in two-storey single-family dwellings, and the majority of extant studies consolidate living room and bedroom data early in the analysis. To investigate this further, detailed analysis was made of radon concentration data from a set of thirty-four homes situated in areas of Northamptonshire known to exhibit high radon levels. All homes were of typical UK construction of brick/block/stone walls under a pitched tile/slate roof. Approximately 50% of the sample were detached houses, the remainder being semi-detached (duplex) or terraced (row-house). Around 25% of the sample possessed cellars, while 12% were single-storey dwellings (bungalows), reflecting the typical incidence of this type of dwelling in England. In the two-storey homes, all monitored bedrooms were on the upper floor. Distribution of the ratios of bedroom/living room radon concentrations (BR/LR ratio) in individual properties was left-skewed (mean 0.67, median 0.73, range 0.05-1.05) with a tail extending to just above 1.0. The mean is consistent with the outcome of earlier extensive studies in England, while the variability depends principally on the characteristics of the property, and not on seasonal factors. In a small set of homes, the BR/LR ratio was anomalously low, (mean 0.3). BR/LR ratios in single-storey homes clustered around a value of 1.0, indicating that house design, rather than lifestyle, is the dominant factor in determining bedroom radon concentrations. Homes with higher mean annual radon concentrations showed lower BR/LR ratios, supporting our proposal that, in some homes, radon emanation from building materials may comprise a significant component of the overall radon level.     

Development of an aggregate Air Quality Index for an urban Mediterranean agglomeration: relation to potential health effects

It is very useful for the authorities and the people to have daily easy understandable information about the levels of air pollution and the proper measures to be taken for the protection of human health. In this paper we develop an aggregate Air Quality Index (AQI) based on the combined effects of five criteria pollutants (CO, SO2, NO2, O3 and PM10) taking into account the European standards. We evaluate it for each monitoring station and for the whole area of Athens, Greece, an area with serious air pollution problems. A comparison was made with a modified version of Environmental Protection Agency/USA (USEPA) maximum value AQI model adjusted for European conditions. Hourly data of air pollutants from 4 monitoring stations, available during 1983-1999, were analysed for the development of the proposed index. The analysis reveals the Athenian population exposure reaches high levels and during last years a gradual increase of days with unhealthy conditions was detected. The proposed aggregate model estimates more effectively the exposure of citizens comparing with the modified USEPA maximum value model, because counts the impact of all the pollutants measured. Towards the informing and protection of the citizens in an urban agglomeration this model advantages as a political and administrative tool for the design of abatement strategies and effective measures of intervention.     

The transfer of 137Cs and 90Sr from feed to rabbits

Radiological assessment of the impact of nuclear weapons testing on the local population in the Semipalatinsk Test Site (STS) requires comprehensive site-specific information on radionuclide behaviour in the environment. However, information on radionuclide behaviour in the conditions of the STS is rather sparse and, in particular, there are no data in the literature on parameters of radionuclide transfer from feed to rabbit products which have been identified as contributors to internal dose to the inhabitants. The transfer of (137)Cs and (90)Sr to rabbit meat was studied under laboratory conditions in a controlled experiment with 32 locally bred rabbits maintained in the Kazakh Agricultural Research Institute. The equilibrium transfer coefficients for (137)Cs and (90)Sr from feed to rabbit meat were estimated to be 0.4 d kg(-1) and 0.15 d kg(-1), respectively. The biological half-lives were estimated to be 0.1 d for (137)Cs and 0.14 d for (90)Sr. Whereas for (137)Cs the distribution in the body is relatively homogeneous, there are large differences between the organs and tissues for (90)Sr for which, as expected, the highest concentrations were found in bone.     

The transfer of 239/240Pu to cow milk

In summer 1993 we measured the transfer of (239/240)Pu to milk from herbage from a pasture located 5 km from the Chernobyl nuclear power plant. In one treatment cows were allowed to graze freely on the pasture. In a second treatment, cows were fed herbage collected from the pasture in stalls. The milk transfer coefficient; F(m) did not vary significantly between treatments and the mean value of 7.5x10(-6)d l(-1) was higher than previously reported values. Despite many values of F(m) for Pu in the literature we identified few relevant original data sets. Transfer coefficient values for Pu are only appropriate when used in conjunction with a specified time period or an appropriate model which allows for the biological half-life. We recommend for screening purposes an F(m) value of 1x10(-5)d l(-1) for Pu, with an order of magnitude lower value being appropriate for cows which are only exposed for one grazing season.