A combined radical and non-radical oxidation processes for efficient degradation of Acid Orange 7 in the homogeneous Cu(II)/PMS system: important role of chloride

Environmental Science and Pollution Research - Trace copper ion (Cu(II)) in water and wastewater can trigger peroxymonosulfate (PMS) activation to oxidize organic compounds, but it only works under...     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

空气中SO2,PM2.5浓度水平与居民每日门诊就诊人次的动态研究

通过对１９９５年重庆渝中区空气中ＳＯ２、ＰＭ２．５浓度水平与居民每日就诊人数的动态观察发现：居民内科各月门认及诊人次按病种分类显示，慢性阻塞性肺部疾病（ＣＯＰＤ）在空气ＳＯ２、ＰＭ２．５空气浓度水平出现峰值的一月份呈现高峰；各年龄组四大类疾病的延迟七日的门诊女性就认人次中，ＣＯＰＤ和循环系统疾病的就诊人次与ＳＯ２、ＰＭ２．５浓度相关系数在０．４－０．７之间，有较为密切的关系。ＣＯＰＤ的时间聚集性分     

感光胶片废水的水解酸化—好氧处理工艺试验

对感光胶片有机生产废水处理工艺进行了方法采用水解酸化－好氧串联工艺和传统活性污泥法两种方法并进行对照。结果经水解酸化处理，废水的ＢＯＤ５／ＣＯＤｃｒ可提高至０．５４－０．５６，平均增加了１７％左右，证实了水解酸化菌在该工艺条件下具有搞高效片废水可生化性的功能。     

GJB 150A淋雨试验强化试验程序数值模拟和试验装置设计研究

目的 研究GJB 150.8A—2009《军用装备实验室环境试验方法第8部分:淋雨试验》中强化试验程序的工程实现方法.方法 在标准解读的基础上,以强化试验程序用喷嘴为对象,建立数值模型,分析喷嘴在强化试验程序过程中的流场分布,并基于分析结果给出强化试验程序试验装置设计的思路和方法.结果 在喷嘴内,压力变化剧烈,极短距离内由276 kPa迅速降至101 kPa.水流经过喷嘴经历了激烈的加速过程,从距离喷嘴出口0.01～0.4 m,水流速度从251 m/s迅速降至17.8 m/s,到远场趋于稳定.结论 分析结果对指导强化试验程序的试验装置的设计和试验实施具有重要参考意义.     

UASB-BIOFOR滤池组合工艺处理柠檬酸废水的中试研究

采用UASB-BIOFOR滤池组合工艺处理柠檬酸废水,对其中的操作步骤及注意事项进行了详细介绍.实验结果表明,该组合工艺对柠檬酸废水处理效果良好,系统出水能够达到GB 8978-1996《污水综合排放标准》中的一级标准.     

4-氯苯酚在水溶液中的光化学反应(Ⅰ)单线态氧和自由基的产生

在模拟太阳光照射下，４氯苯酚（４ＣＰ）浓度迅速降低，反应过程对应着产生大量的单线态氧和自由基．金属离子Ｆｅ２＋、Ｆｅ３＋、Ａｌ３＋能够加速这一过程，尤以Ｆｅ２＋、Ｆｅ３＋的影响更明显；在模拟太阳光照射下，向４ＣＰ体系加入的富里酸（ＦＡ），对４ＣＰ浓度降低略起抑制作用，这表明二者之间存在相互作用．但当再加入金属离子Ｆｅ２＋、Ｆｅ３＋、Ａｌ３＋后，能够加速４ＣＰ浓度降低，尤以Ｆｅ２＋、Ｆｅ３＋的影响更显著．     

采取多种手段综合整治圆明园防渗工程

圆明园是北京市享誉中外的世界文化遗产公园，园内有140hm^2湖面，因湖水渗漏严重，每年要进行大量补水。为此圆明园管理处投资数千万，进行了湖底铺膜防渗工程，2005年4月份，接近完工的防渗工程被国家环保总局紧急停止。该项工程如何走出困境，本文从湖底开孔建渗水井，引进中水，以及湖水活化等多方面，提出一些合理化建议，希望以此构建一个水资源节约利用，而且可持续发展的湖区水生生态系统和一个和谐的园区人文景观。