工业余热拆卸废旧电路板

电路板插槽元器件、通孔元器件、大元器件和小元器件的拆卸是废旧电路板资源化的第一步。前三者的拆卸率对后续的电路板粉碎有较大影响,是决定拆卸效果的重要参数。为探究工业余热拆卸废旧电路板方法中通气温度、加热时间和喷吹次数对元器件拆卸率的影响,找出最优的拆卸参数组合,进行了废旧电路板拆卸的正交实验。对元器件拆卸率、关键元器件总拆卸率的极差分析和方差分析表明,通气温度和加热时间的增大有利于元器件拆卸率增大;增加喷吹次数,有利于大元器件和小元器件的拆卸,但过多次数喷吹将造成插槽、通孔元器件引脚弯曲,拆卸率减小;通气温度、加热时间对元器件拆卸的影响不具显著性,喷吹次数仅对大元器件拆卸有显著性影响。综合分析关键元器件的拆卸率：通气温度350℃、加热时间5 min和喷吹6次是最优的拆卸参数组合,关键元器件总拆卸率达到98.6%。     

Influence of different inoculation densities of black soldier fly larvae (Hermetia illucens) on heavy metal immobilization in swine manure

The disposal of organic waste by the biocomposting of black soldier fly larvae (BSFL) has drawn broad attention. However, the discrepancies in heavy metal immobilization between BSFL biocomposting with different inoculation densities and aerobic composting need to be further researched. In this study, BSFL with inoculation densities of 0.08%, 0.24% and 0.40% was added to swine manure to investigate its influence on heavy metal bioaccumulation and bioavailability. The physicochemical properties, BSFL growth performance and amino acid contents were measured. The results showed that the germination index, total prepupal yield and bioavailable fraction removal rate (%) of Cr and Pb at an inoculation density of 0.40% of BSFL were the highest among all of the BSFL biocomposting groups. Although the bioaccumulation factor and heavy metal (Cd, Cr, Cu and Zn) concentrations of the BSFL body from swine manure with inoculation densities of 0.24% and 0.40% of BSFL were similar, the BSFL inoculation density of 0.40% had the best absorption effect on these heavy metals in terms of total prepupal yield. Therefore, this study provides a basis for exploring the optimal inoculation density of BSFL biocomposting to reduce the harmful effects of heavy metals in swine manure.

     

Mn2+协同过二硫酸钠电催化体系对茜素红与酸性蓝80的降解性能研究

以酸性蓝80(AB80)与茜素红(AR)配制的两种模拟染料废水为处理对象,分析Mn2+与过二硫酸钠(PDS)浓度、初始pH和电流密度等因素对Mn2+协同PDS电催化体系降解两种染料的影响,并探讨其降解机理.结果表明,该体系降解AR和AB80的最佳初始pH(3)和Mn2+摩尔浓度(40μmol/L)相同,AR比AB80更...     

Study on the cytotoxicity of microcystin-LR on cultured cells

The toxicity of purified blue-green algal toxin, microcystin-LR, on permanent cell lines KB, NIH/3T3, H-4-II-E, HeLa, Vero, Hep G2, Caco-2 and HL-60 was studied. Assessment of cell viability using colorimetric 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assays indicated that purified microcystin-LR induced toxic effect on KB and H-4-II-E cell lines after 96 h incubation at toxin concentrations greater than 18.75 microg/ml. KB cell line was selected for further study when reproducibility, consistency and sensitivity were considered. Significant amounts of lactate dehydrogenase (LDH) were released from KB cells when incubation durations were 72 and 96 h with toxin concentrations of 18.75 microg/ml and higher. Although previous studies suggested that microcystin-LR had no cytotoxic effect on permanent cell lines, LDH release assay performed on KB cells indicated that exposure to microcystin-LR could result in damage to the cell membrane.     

Comparison of metabolome profiles in zebrafish (Danio rerio) intestine induced by polystyrene microplastics with different sizes

Environmental Science and Pollution Research - Microplastics (MPs) are widespread in aquatic environments. They could induce intestinal toxicity in the fish. However, research on the metabolic...     

Numerical modeling of changes in groundwater storage and nitrate load in the unconfined aquifer near a river receiving reclaimed water

Environmental Science and Pollution Research - Reclaimed water (RW) has been widely used as an alternative water resource to recharge rivers in mega-city Beijing. At the same time, the RW also...     

Contamination of marine fauna by chlordecone in Guadeloupe: evidence of a seaward decreasing gradient

Chlordecone is an organochlorine pesticide, used in the Lesser Antilles from 1972 to 1993 to fight against a banana weevil. That molecule is very persistent in the natural environment and ends up in the sea with runoff waters. The objective of the present study is to evaluate the level of contamination in several trophic groups of marine animals according to their distance from the source of pollution. Samples of suspended matter, macroalgae, herbivorous fishes, detrivorous crustaceans, zooplanktivorous fishes, first- and second-order of carnivorous fishes, and piscivorous fishes have been collected in two sites, located downstream the contaminated sites (Goyave and Petit-Bourg), in three marine habitats (coastal mangroves, seagrass beds located 1.5 km from the shoreline, and coral reefs at 3 km offshore). Animals collected in mangroves were the most contaminated (mean concentrations 193 μg kg^?1 in Goyave and 213 μg kg^?1 in Petit-Bourg). Samples from seagrass beds presented intermediate concentrations of chlordecone (85 μg kg^?1 in Goyave and 107 μg kg^?1 in Petit-Bourg). Finally, samples from coral reefs were the less contaminated (71 μg kg^?1 in Goyave and 74 μg kg^?1 in Petit-Bourg). Reef samples, collected 3 km offshore, were two to three times less contaminated than those collected in mangroves.     

Development and implementation of eco-genomic tools for aquatic ecosystem biomonitoring: the SYNAQUA French-Swiss program

The effectiveness of environmental protection measures is based on the early identification and diagnosis of anthropogenic pressures. Similarly, restoration actions require precise monitoring of changes in the ecological quality of ecosystems, in order to highlight their effectiveness. Monitoring the ecological quality relies on bioindicators, which are organisms revealing the pressures exerted on the environment through the composition of their communities. Their implementation, based on the morphological identification of species, is expensive because it requires time and experts in taxonomy. Recent genomic tools should provide access to reliable and high-throughput environmental monitoring by directly inferring the composition of bioindicators’ communities from their DNA (metabarcoding). The French-Swiss program SYNAQUA (INTERREG France-Switzerland 2017–2019) proposes to use and validate the tools of environmental genomic for biomonitoring and aims ultimately at their implementation in the regulatory bio-surveillance. SYNAQUA will test the metabarcoding approach focusing on two bioindicators, diatoms, and aquatic oligochaetes, which are used in freshwater biomonitoring in France and Switzerland. To go towards the renewal of current biomonitoring practices, SYNAQUA will (1) bring together different actors: scientists, environmental managers, consulting firms, and biotechnological companies, (2) apply this approach on a large scale to demonstrate its relevance, (3) propose robust and reliable tools, and (4) raise public awareness and train the various actors likely to use these new tools. Biomonitoring approaches based on such environmental genomic tools should address the European need for reliable, higher-throughput monitoring to improve the protection of aquatic environments under multiple pressures, guide their restoration, and follow their evolution.     

污染场地绿色可持续修复理念、工程实践及对我国的启示

经过近30年的污染场地修复实践,越来越多的人意识到传统的修复理念存在很多不足。在可持续发展的社会背景下,欧美各国积极倡导绿色可持续修复理念,全面考查污染场地的修复行为对环境、社会和经济造成的所有影响,从而使修复行为的效益最大化。本文介绍了绿色可持续修复的概念与发展情况、评估指标和方法,并分析了一个从多方面贯彻绿色可持续修复原则的工程实践案例。最后,从加强行业和公众的教育培训、构建基于国情的绿色可持续修复评估框架、强化场地前期调查、提高社会利益相关方的参预性等几方面,对我国推进绿色可持续修复的发展提出建议。     

低温碱溶脱除液晶显示器(LCD)玻璃基板粉末中的硅和铝

为了提高氯化法回收LCD中铟的效果,降低SiO2和Al2O3对氯化过程的干扰,采用NaOH对液晶显示器玻璃基板粉末中的硅和铝进行了预先溶出规律研究.首先分析了LCD粉末中SiO2和Al2O3的含量、形貌以及铟的浸出变化,然后计算了SiO2和Al2O3的脱除效率.在条件实验基础上通过正交实验设计得出优化实验条件.研究表明,在液固比为90:2、温度95℃、溶出时间2 h、碱度0.56 g/L的最佳工艺条件下, SiO2的脱除率为80.88%、Al2O3的脱除率为 83.30%、二者总的脱除率为81.30%,洗涤液中没有发现铟的溶出,碱溶后的物料表面产生大量均匀的孔状结构.这将对液晶显示器玻璃基板粉末的资源化与铟的富集有重要意义.