电除尘器气流分布数值计算方法研究

运用CFD方法对电除尘器内的气流流动进行数值计算,以相应的电除尘器气流分布模型试验为验证算例。数值计算采用多孔介质模型简化进口喇叭气流分布板,以第一电场进口断面的气流速度分布趋势及相对均方根值为评判标准,对比3种不同导流片布置方案的模型实测结果与数值计算结果。结果表明:各方案模拟结果与试验结果均吻合较好,最终布置方案的数值计算结果满足电除尘器设计要求。     

石油污染土壤中芘高效降解菌群的筛选及降解特性研究

从长期受石油污染土壤中驯化筛选到能以芘为惟一碳源生长的混合菌群GP3,其主要由假单胞菌株GP3A(Pseudomonas sp.)和菌株GP3B(Pandoraea pnomenusa)组成.采用摇瓶振荡培养方法,研究了不同环境条件对混合菌GP3降解芘效能的影响.结果表明,在30℃,150 r/min振荡培养下,混合菌GP3对15 mg/L芘的7 d降解率为90.6%.混合菌GP3降解芘的最适宜温度为35℃,最佳pH值为6.2.加入低浓度葡萄糖(100 mg/L)或菲(10 mg/L)作为共代谢底物,均可提高GP3对芘的降解率.混合菌对芘的降解速率(PDR)与芘的初始浓度呈正相关.研究重金属离子胁迫下GP3对芘的降解时发现,10 ms/L Zn2 的存在对芘降解效能影响较小,Cu2 对芘的降解有抑制作用,Cd2 对混合菌GP3有很强的毒性.     

SBR快速实现短程硝化及影响因素

基于建立的序批式反应器(SBR),探索实现城市生活污水短程硝化的主要控制因素。研究结果表明,废水温度维持在(30±1)℃、pH值为7.8~8.2的条件下,采用间歇曝气的运行方式,仅驯化培养29 d,成功实现短程硝化,亚硝氮积累率为95%左右。通过对比发现,间歇曝气方式优于连续曝气方式,间歇曝气能有效地将溶解氧(DO)浓度控制在1.0 mg/L以下,从而有利于进行短程硝化反应。此外,温度和pH可以影响亚硝氮的积累效果;当温度在25~35℃、进水pH为7.8~8.2时,亚硝氮的积累情况较好,积累率在91%以上。     

兰炭焦粉的石墨化探索性研究

兰炭是利用陕北榆林地区低磷、低硫、低挥发分煤经低温干馏得到的一种煤化工产品,在其生产过程产生大约15%左右的焦粉,目前主要作为冶金用还原剂或者低级燃料廉价处理,经济价值较低。为了开辟焦粉的高副价值利用新途径,对焦粉的石墨化技术进行了探索研究。结果表明,焦粉直接石墨化,2500℃时其石墨化度可达90%,而在铜粉、氧化铁和二氧化钛催化作用下,1800℃时焦粉的石墨化度达到90%以上,达到同样的石墨化效果,催化剂的作用可使石墨化温度直接降低700℃,焦粉石墨化过程能耗得到很大程度降低。另外,焦粉热处理温度越高,产物纯度越高,石墨化效果越好,Cu粉催化作用下产物的2H晶型趋于更完整。研究结果不但为焦粉的石墨化提供理论与技术支持,而且为制备石墨材料开辟了新的原料来源,并促进榆林地区兰炭产业的健康发展。     

Self-healing passivation of pyrite at ambient temperature

Environmental Chemistry Letters - Acid mine drainage is highly acidic and contains heavy metals, which can be harmful to soil, water, plants, and animals. To solve this issue, surface passivation...     

复合多管除尘器在湿法水泥回转窑除尘中的应用

把具有惯性沉降除尘、旋风子除尘两级一体功能的复合多管除尘器用于带湿式蒸发器的湿法水泥回转窑尾气除尘，替换原“旋风除尘器＋电除尘器”除尘系统中的多筒旋风器。运行测试表明，它的除尘效率达到９４６％，确保了窑尾排放烟尘浓度达到国家标准。     

工艺安全管理系统的发展现状及建议

介绍工艺安全管理的发展历程、关键要素及各要素在企业不同生命周期的应用,总结国外发达国家的相关法规及实施工艺安全管理后重大事故发生概率的变化,对我国工艺安全管理提出建议。     

基于风险的压缩天然气加气站安全距离研究

首次以个体自然死亡概率为基础,确定个体风险标准,提出压缩天然气加气站关键设备与暴露目标之间安全距离确定方法的基本原则在此基础上,根据泄漏模式确定关键设备泄漏频率,采用几何风险消减因子对泄漏频率进行修正,选出需要计算安全距离的关键设备,按照伤害准则,确定关键设备发生危险场景的安全距离.     

Formation,antimicrobial activity,and biomedical performance of plant-based nanoparticles: a review

Environmental Chemistry Letters - Because many engineered nanoparticles are toxic, there is a need for methods to fabricate safe nanoparticles such as plant-based nanoparticles. Indeed, plant...     

Impact of Covid-19 partial lockdown on PM2.5, SO2, NO2, O3, and trace elements in PM2.5 in Hanoi,Vietnam

Covid-19 lockdowns have improved the ambient air quality across the world via reduced air pollutant levels. This article aims to investigate the effect of the partial lockdown on the main ambient air pollutants and their elemental concentrations bound to PM_2.5 in Hanoi. In addition to the PM_2.5 samples collected at three urban sites in Hanoi, the daily PM_2.5, NO₂, O₃, and SO₂ levels were collected from the automatic ambient air quality monitoring station at Nguyen Van Cu street to analyze the pollution level before (March 10th–March 31st) and during the partial lockdown (April 1st–April 22nd) with “current” data obtained in 2020 and “historical” data obtained in 2014, 2016, and 2017. The results showed that NO₂, PM_2.5, O₃, and SO₂ concentrations obtained from the automatic ambient air quality monitoring station were reduced by 75.8, 55.9, 21.4, and 60.7%, respectively, compared with historical data. Besides, the concentration of PM_2.5 at sampling sites declined by 41.8% during the partial lockdown. Furthermore, there was a drastic negative relationship between the boundary layer height (BLH) and the daily mean PM_2.5 in Hanoi. The concentrations of Cd, Se, As, Sr, Ba, Cu, Mn, Pb, K, Zn, Ca, Al, and Mg during the partial lockdown were lower than those before the partial lockdown. The results of enrichment factor (EF) values and principal component analysis (PCA) concluded that trace elements in PM_2.5 before the partial lockdown were more affected by industrial activities than those during the partial lockdown.