Composition of Floating Debris in Harbours of the United States

As part of a programme to characterize floating anthropogenic debris in the aquatic environment, the US Environmental Protection Agency (EPA) conducted 18 field surveys in the harbours of major metropolitan cities of the east, west, and Gulf coasts of the United States and the Mid-Atlantic Bight. the surveys were designed to provide information on the types, relative amounts, and distributions of aquatic debris in different geographic regions of the United States. Neuston nets (0.33 mm mesh) were used to collect surface debris during outgoing tides on two or three consecutive days in selected areas of each city. After each net tow, the debris, which ranged in size from small resin pellets to large plastic sheeting pieces, was identified, categorized, and counted. the data are being used to qualitatively characterize aquatic debris in coastal metropolitan areas, to examine potential regional variations, and to tentatively identify potential sources.     

热带海洋环境中BHC和DDT的行为特征研究Ⅰ.中国珠江口区旱季BHC和DDT的含量与分布

本文于1994年11月用气相色谱法研究了旱季珠江口区环境中BHC和DDT的含量与分布。结果表明，表层海水BHC含量为0.187μg/L，DDT为0.080μｇ/L；底层海水BHC为0.117μｇ／L，DDT为0.506μｇ／L。沉积物BHC为11.15×10－9（干），DDT为33.46×10－9（干）。海水中的盐度、DO、C     

我国农药废水的处理现状及发展趋势

随着我国农药产量的逐年提高，农药废水的处理形势也日益严峻，因此农药废水处理的新工艺、新方法成为科研工作者研究的热点。根据文献资料，概述了农药废水的种类、特点及其处理方法，主要包括物理法，化学法和生物化学法，以及近些年发展的磁分离法和超声波技术处理法，并叙述了目前我国有机磷、有机氯、有机硫等农药废水的处理现状及研究成果。同时指出了新技术、新工艺的研究及实行清洁生产制度将成为我国农药废水处理技术的发展趋势。     

特征编码在摩托车盘类零件CAD中的应用

采用特征编码技术对摩托车盘类零件进行特征编码，根据码位对应的形状特征进行特征造型并定制成参数化图元，煞后以零件主特征的关键尺寸为驱动参数对构成零件形状特征的图元进行拼接，实现摩托车盘类零件的参数化设计。     

麻石文丘里洗涤吸收器在APV尾气处理上的应用

介绍了ＡＰＶ喷雾干燥尾气的性质，原尾气系统存在的问题，改造中采取的措施、原理、流程和取得的效果。实践证明，用“麻石文丘里一次降温、洗涤—ＸＰ型塔板二次洗涤—旋流除雾器除雾”的改造方案，取代原“换热器降温—喷淋塔洗涤—折流脱水器脱水”的流程，取得了良好的降温、洗气和除雾效果，且工程费用低。     

Enzyme-Retted Flax Fiber and Recycled Polyethylene Composites

Municipal solid wastes generated each year contain potentially useful and recyclable materials for composites. Simultaneously, interest is high for the use of natural fibers, such as flax (Linum usitatissimum L.), in composites thus providing cost and environmental benefits. To investigate the utility of these materials, composites containing flax fibers with recycled high density polyethylene (HDPE) were created and compared with similar products made with wood pulp, glass, and carbon fibers. Flax was either enzyme- or dew-retted to observe composite property differences between diverse levels of enzyme formulations and retting techniques. Coupling agents would strengthen binding between fibers and HDPE but in this study fibers were not modified in anyway to observe mechanical property differences between natural fiber composites. Composites with flax fibers from various retting methods, i.e., dew- vs. enzyme-retting, behaved differently; dew-retted fiber composites resulted in both lower strength and percent elongation. The lowest level of enzyme-retting and the most economical process produces composites that do not appear to differ from the highest level of enzyme-retting. Flax fibers improved the modulus of elasticity over wood pulp and HDPE alone and were less dense than glass or carbon fiber composites. Likely, differences in surface properties of the various flax fibers, while poorly defined and requiring further research, caused various interactions with the resin that influenced composite properties.     

聚天冬氨酸对土壤吸附、解吸汞的机制研究

为揭示土壤中添加聚天冬氨酸(PASP)后其对汞的吸附、解吸过程,探究了不同PASP用量对土壤吸附解吸汞的机制及有机质、pH、汞初始浓度等因素的影响.结果 表明,PASP可显著抑制土壤对汞的吸附,促进土壤对汞的解吸,在PASP用量为300 mg时,其吸附量、解吸量分别是未添加PASP时的0.68、27倍;有机质与PASP...     

铬渣的热解无害化处理

采用热解工艺无害化处理铬渣,探讨了稻秆在铬渣无害化处理中的作用.研究了热解温度、稻秆与铬渣质量比、铬渣粒径及保温时间对铬渣热解无害化处理的影响,并分析了热解前后热解产物中铬元素形态的变化.结果表明,热解工艺能有效地将铬渣中Cr(Ⅵ)还原,稻秆热解过程中产生的气相挥发分对Cr(Ⅵ)的还原起核心作用.较为适宜的热解条件:热解温度为400 ℃,稻秆与铬渣质量比为0.10,铬渣粒径<2 000 μm,保温时间为10 min.在该热解条件处理下,热解产物中的Cr(Ⅵ)质量浓度为121 mg/kg,低于热解前铬渣中的Cr(Ⅵ)(3 400 mg/kg).热解后,可交换态及碳酸盐结合态铬含量降低,大部分铬转化成了稳定的有机结合态和残渣态,极大地降低了铬渣的危害.第一作者:张大磊,男,1982生,博士研究生,研究方向为固体废弃物热处理.     

Improvements of nano-SiO2 on sludge/fly ash mortar

Sewage sludge ash has been widely applied to cementitious materials. In this study, in order to determine effects of nano-SiO(2) additives on properties of sludge/fly ash mortar, different amounts of nano-SiO(2) were added to sludge/fly ash mortar specimens to investigate their physical properties and micro-structures. A water-binding ratio of 0.7 was assigned to the mix. Substitution amounts of 0%, 10%, 20%, and 30% of sludge/fly ash (1:1 ratio) were proposed. Moreover, 0%, 1%, 2%, and 3% of nano-SiO(2) was added to the mix. Tests, including SEM and compressive strength, were carried out on mortar specimens cured at 3, 7, and 28 days. Results showed that sludge/fly ash can make the crystals of cement hydration product finer. Moreover, crystals increased after nano-SiO(2) was added. Hence, nano-SiO(2) can improve the effects of sludge/fly ash on the hydration of mortar. Further, due to the low pozzolanic reaction active index of sludge ash, early compressive strengths of sludge/fly ash mortar were decreased. Yet, nano-SiO(2) could help produce hydration crystals, which implies that the addition of nano-SiO(2) to mortar can improve the influence of sludge/fly ash on the development of the early strength of the mortar.     

Photo-degradation organic dyes by Sb-based organic-inorganic hybrid ferroelectrics

The organic-inorganic hybrid halide compounds have emerged as one of the most promising photoelectric material for their superior optoelectronic properties and hold great prospects for renewable energy substitutes and environmental protection as photocatalysis. Here, we report the optical properties of the Sb-based organic-inorganic hybrid ferroelectric materials: pyridine-4-aminium tetrachloroantimonate ((C₅H₇N₂)SbCl₄, sample 1), piperidin-1-aminium tetrachloroantimonate ((C₅H₁₃N₂)SbCl₄, sample 2) and tris(trimethylammonium) nonachlorodiantimonate (((CH₃)₃NH)₃Sb₂Cl₉, sample 3), which are a kind of exploited efficient photocatalysts. Samples 2 and 3 exhibit distinct photoelectric respond, which are mainly ascribed to their minor narrow band-gap compared with sample 1. For the ferroelectrics, the intrinsic of spontaneous polarization of sample 3 at room temperature is favourable for the separation of photogenerated electrons and holes within the photorespond process. Moreover, sample 3 shows the highest efficiency of photo-decomposed Rhodamine B (90.2% within 80 min) and Methyl Orange (MO) (97.4% within 50 min), thanks to the photo-excited electrons and holes promoting the formation of oxidative radical species during the photo-redox progress. These findings prove that the development of a novel Sb-based organic-inorganic hybrid halide compounds with good stability in the degradation of organic dyes paves a way to designing new photocatalyst.