Effect of straw retention on carbon footprint under different cropping sequences in Northeast China

Environmental Science and Pollution Research - Inappropriate farm management practices can lead to increased agricultural inputs and changes in atmospheric greenhouse gas (GHG) emissions, impacting...     

Influence of pore structure on biologically activated carbon performance and biofilm microbial characteristics

• Pore structure affects biologically activated carbon performance. • Pore structure determines organic matter (OM) removal mechanism. • Microbial community structure is related to pore structure and OM removal. Optimizing the characteristics of granular activated carbon (GAC) can improve the performance of biologically activated carbon (BAC) filters, and iodine value has always been the principal index for GAC selection. However, in this study, among three types of GAC treating the same humic acid-contaminated water, one had an iodine value 35% lower than the other two, but the dissolved organic carbon removal efficiency of its BAC was less than 5% away from the others. Iodine value was found to influence the removal of different organic fractions instead of the total removal efficiency. Based on the removal and biological characteristics, two possible mechanisms of organic matter removal during steady-state were suggested. For GAC with poor micropore volume and iodine value, high molecular weight substances (3500–9000 Da) were removed mainly through degradation by microorganisms, and the biodegraded organics (soluble microbial by-products,<3500 Da) were released because of the low adsorption capacity of activated carbon. For GAC with higher micropore volume and iodine value, organics with low molecular weight (<3500 Da) were more easily removed, first being adsorbed by micropores and then biodegraded by the biofilm. The biomass was determined by the pore volume with pore diameters greater than 100 μm, but did not correspond to the removal efficiency. Nevertheless, the microbial community structure was coordinate with both the pore structure and the organic removal characteristics. The findings provide a theoretical basis for selecting GAC for the BAC process based on its pore structure.     

新型混凝剂在废水处理中的应用研究

自行研发出一种新型混凝剂，它能广泛应用于印染废水、生活污水和餐饮废水等的处理。经过一步强化混凝处理后，各种废水的COD、色度和浊度等均有良好的去除效果。混凝污泥可以再生重复利用。     

Ce-Sn-W-O_x催化剂的配伍优化及脱硝影响因素

采用共混热解法制备系列Ce-Sn-W-Ox复合氧化物,用于NH3选择性催化还原NO。通过正交实验优化CeSn-W-Ox配方,采用环境扫描电镜(ESEM)、X-射线衍射仪(XRD)等表征分析催化剂的微观形貌和固相结构,确立Ce-Sn-WOx最佳配比及结构形貌。结果表明,以粒度为5~8 mm的堇青石瓷片担载分散Ce-Sn-W-Ox,进行NH3-SCR脱除NO,当Ce/Sn/W元素摩尔比为1∶0.8∶0.6时,Ce Sn0.8W0.6Ox/堇青石NH3-SCR脱除NO效果最好。当空速为7 200 h-1,催化剂在252~426℃内脱除NO效率均大于94%。重点考察了反应空速(GHSV)、水蒸气(H2O)、SO2等对Ce Sn0.8W0.6Ox/堇青石NH3-SCR脱除NO活性的影响。研究表明,空速低于10 000 h-1时,催化剂脱硝活性受空速影响小;单独通入5%H2O对催化剂脱硝活性基本没有影响;单独通入429 mg/m3SO2导致催化剂活性略有降低;同时通入429 mg/m3SO2和5%H2O,催化剂脱硝活性下降至85.33%,除去SO2和H2O后,催化剂活性又能明显回升。     

A combined radical and non-radical oxidation processes for efficient degradation of Acid Orange 7 in the homogeneous Cu(II)/PMS system: important role of chloride

Environmental Science and Pollution Research - Trace copper ion (Cu(II)) in water and wastewater can trigger peroxymonosulfate (PMS) activation to oxidize organic compounds, but it only works under...     

Sources and patterns of polycyclic aromatic hydrocarbons pollution in kitchen air,China

Twelve polycyclic aromatic hydrocarbons, multi-ringed compounds known to be carcinogenic in air of six domestic kitchens and four commercial kitchens of China were measured in 1999-2000. The mean concentration of total PAHs in commercial kitchens was 17 microg/m3, consisting mainly of 3- and 4-ring PAHs, and 7.6 microg/m3 in domestic kitchens, where 2- and 3-ring PAHs were predominant, especially naphthalene. The BaP levels in domestic kitchens were 0.0061-0.024 microg/m3 and 0.15- 0.44 microg/m3 in commercial kitchens. Conventional Chinese cooking methods were responsible for such heavy PAHs pollution. The comparative study for PAH levels in air during three different cooking practices: boiling, broiling and frying were conducted. It was found that boiling produced the least levels of PAHs. For fish, a low-fat food, frying it produced a larger amount of PAHs compared to broiling practice, except pyrene and anthracene. In commercial kitchens, PAHs came from two sources, cooking practice and oil-fumes, however the cooking practice had a more predominant contribution to PAHs in commercial kitchen air. In domestic kitchens, except for cooking practice and oil-fumes, there were other PAHs sources, such as smoking and other human activities in the domestic houses, where 3-4 ring PAHs mainly came from cooking practice. Naphthalene (NA, 2-ring PAHs) was the most predominant kind, mostly resulting from the evaporation of mothball containing a large quantity of NA, used to prevent clothes against moth. A fingerprint of oil-fumes was the abundance of 3-ring PAHs. Heating at the same temperature, the PAHs concentrations in different oil-fumes were lard > soybean oil > rape-seed oil. An increase in cooking temperature increased the levels of PAHs, especially acenaphthene.     

Structural effect on photocatalytic degradation of metallised azo dyes in aqueous TiO2 suspension

Three metallised azo dyes were investigated under TiO₂‐photocatalytic and photosensitised conditions in aqueous buffering solutions. The degradation follows apparent first‐order kinetics. The size and strength of intramolecular conjugation determine the light‐fastness of the investigated dyes. Compared with ¹O₂ produced in photosensitised process, the more powerful *OH radicals in TiCO₂ photocatalytic process are highly reactive towards the investigated azo dyes. And as a result, the TiO₂‐photocatalysis makes little less distinction in the degradation kinetic data of the azo dyes compared with the photosensitised degradation of them.     

Characteristics of geological hazards in South China coastal areas and impact on regional sustainable development

Prevention and treatment of geological hazards is important for the sustainable development of human society. Surface geological hazards alone caused direct economic losses of ¥3.47 billion, with 768 deaths and 785 injuries in Guangdong Province, South China, from 1994 to 2005. The major factors causing geological hazards can be categorised into three types: geo-environmental, climatic-meteorological and human activity. Accompanied by rapid economic development and population growth, human activities can cause geological hazards that are as serious as those caused by natural factors. The authors propose some suggestions for prevention and treatment of geological hazards to achieve sustainable development on the Chinese coast.     

Denitrification and phosphorus uptake by DPAOs using nitrite as an electron acceptor by step-feed strategies

Denitrifying phosphorus accumulating organisms (DPAOs) using nitrite as an electron acceptor can reduce more energy. However, nitrite has been reported to have an inhibition on denitrifying phosphorus removal. In this study, the step-feed strategy was proposed to achieve low nitrite concentration, which can avoid or relieve nitrite inhibition. The results showed that denitrification rate, phosphorus uptake rate and the ratio of the phosphorus uptaken to nitrite denitrified (anoxic P/N ratio) increased when the nitrite concentration was 15 mg·L^-1 after step-feeding nitrite. The maximum denitrification rate and phosphorus uptake rate was 12.73 mg NO2-–N·g MLSS-1?h-1 and 18.75 mg PO43-–P·g MLSS-1?h-1, respectively. These rates were higher than that using nitrate (15 mg·L^-1) as an electron acceptor. The maximum anoxic P/N ratio was 1.55 mg PO43--P?mg NO2--N-1. When the nitrite concentration increased from 15 to 20 mg NO2--N?L-1 after addition of nitrite, the anoxic phosphorus uptake was inhibited by 64.85%, and the denitrification by DPAOs was inhibited by 61.25%. Denitrification rate by DPAOs decreased gradually when nitrite (about 20 mg·L^-1) was added in the step-feed SBR. These results indicated that the step-feed strategy can be used to achieve denitrifying phosphorus removal using nitrite as an electron acceptor, and nitrite concentration should be maintained at low level (<15 mg·L^-1 in this study).     

水体沉积物质量基准研究现状

沉积物质量基准是对水质基准的补充,对水质管理具有重要意义。目前国际上沉积物质量基准计算方法有十几种。对各种方法的理论基础、数据需求、适用范围等方面进行了概述之后,综合分析了各种方法的理论基础。研究结果认为,应将建立沉积物质量基准的方法分为以生物效应数据为基础的生物效应数据库法和以相平衡分配原理为依据的相平衡分配法。而根据统计方法不同,生物效应数据库法又分为单值基准、双值基准和三轴图法。同时还对美国、加拿大、荷兰、英国、澳大利亚和新西兰的沉积物质量基准研究发展和应用概况进行了分析。结合我国实际情况认为,依赖于大量生物效应数据的生物效应数据库法,目前在我国的适用范围有限,只能用于推导少数几种污染物的基准值。相平衡分配法具有可靠的理论基础而且不需要大量的生物效应数据,具有很大的发展潜力。因此,对于目前沉积物质量基准研究处于初级阶段的我国,更适合使用相平衡分配法计算污染物沉积物质量基准。