三峡水库典型支流磷素赋存形态特征及其成因

采用2018年三峡水库低水位期(6月)、蓄水期(9月)和高水位期(12月)对库区内的典型一级支流——香溪河与神农溪回水区水质、水动力及环境因子的监测数据,对比分析了三峡水库内的典型支流在水库不同调度期时水体中磷素的存在形态及成因.结果表明,香溪河与神农溪库湾水体总磷(TP)质量浓度变化范围分别为0.049～0.168m...     

The dynamic changes of arsenic biotransformation and bioaccumulation in muscle of freshwater food fish crucian carp during chronic dietborne exposure

Dietary uptake is the major way that inorganic arsenic (iAs) enters into benthic fish; however, the metabolic process of dietborne iAs in fish muscle following chronic exposure remains unclear. This was a 40-day study on chronic dietborne iAs [arsenite (AsIII) and arsenate (AsV)] exposure in the benthic freshwater food fish, the crucian carp (Carassius auratus), which determined the temporal profiles of iAs metabolism and toxicokinetics during exposure. We found that an adaptive response occurred in the fish body after iAs dietary exposure, which was associated with decreased As accumulation and increased As transformation into a non-toxic As form (arsenobetaine). The bioavailability of dietary AsIII was lower than that of AsV, probably because AsIII has a lower ability to pass through fish tissues. Dietary AsV exhibited a high potential for transformation into AsIII species, which then accumulated in fish muscle. The largely produced AsIII considered more toxic at the earlier stage of AsV exposure should attract sufficient attention to human exposure assessment. Therefore, the pristine As species and exposure duration had significant effects on As bioaccumulation and biotransformation in fish. The behavior determined for dietborne arsenic in food fish is crucial for not only arsenic ecotoxicology but also food safety.     

喀斯特地区非物质文化遗产空间格局及影响因素——以贵州省为例

厘清喀斯特地区非遗分布的空间格局有利于盘点资源现状,客观了解区域文化产生过程,以提高非遗的管理、保护与开发水平.基于地理学空间视角,利用GIS空间分析方法,探讨贵州9个地州市1023项非物质文化遗产类型结构、空间格局及影响因素,研究发现:(1)贵州省非物质文化遗产项目类型结构层次分明,民俗类数量最多,曲艺、传统医药与传统美术类相对稀缺;(2)贵州省非物质文化遗产空间分布不均衡,以贵阳市和黔东南州为双核心,中部和东部集聚明显,西部地区分布较少;(3)贵州省近90％的非物质文化遗产集中分布在海拔1400 m以下的喀斯特低山、中低山区域,曲艺类占比最高,传统体育、游艺与杂技和传统技艺两类分布与主要河流流域拟合较好,民间文学类与明清时期主要交通干线空间分布关联较高;(4)地形地貌、水系、文化、交通、经济等自然和人文因素对喀斯特地区非物质文化遗产空间格局产生重要影响.     

武汉地区夏季和秋冬季大气污染的天气概念模型

利用2013～2019年武汉市生态环境局监测数据、L波段雷达探空资料、NCEP/NCAR逐日再分析资料,对夏季和秋冬季武汉地区污染日的大气污染特征、边界层结构、环流形势、物理量场进行研究,建立了武汉地区大气污染的天气概念模型.主要结论如下:(1)武汉市空气质量具有季节性变化特征,大气污染程度四季分布表现为冬＞秋＞春＞夏.夏季首要污染物是臭氧,冬季首要污染物是PM2.5.(2)比较挑选出的夏季清洁日和污染日的气象要素特征,污染日逆温的平均强度约为清洁日的一倍,逆温底高一般在600 m以下,空气质量一般为轻度-中度污染;静风频率(37.1％)明显高于清洁日的静风频率(2.9％);污染日平均风速小(0.8 m/s),边界层内相对湿度较低.同样比较秋冬季两类天气的气象要素特征,污染日逆温底高低、厚度小,不及清洁日的一半,不利于污染物的扩散,易出现重度污染天气.静风频率(20％)高于清洁日的静风频率(7.5％),风速小(1.6 m/s),污染日边界层内呈明显上千下湿的格局.(3)建立了夏季大气污染的天气概念模型,污染日副高偏弱位置偏东,长江流域易少雨干旱;地面我国东部大范围地区处于均压场中,武汉地区为偏东北异常小风,不利于大气污染物的扩散.(4)建立了秋冬季大气污染的天气概念模型,长江流域环流平直少波动,配合地面弱低压的天气形势和较强的逆温使得大气污染物聚集在近地面.蒙古冷高压强度偏弱,使得入侵我国的冷空气强度偏弱;武汉地区为偏北小风,对雾霾的移除和稀释扩散作用差.该研究结论可供大气污染预测预警研究和环境管理部门大气污染的联防联控参考.     

Contextual and organizational factors in sustainable supply chain decision making: grey relational analysis and interpretative structural modeling

Environment, Development and Sustainability - Sustainable supply chain emerges as a major business trend essential to long-term competitive advantage. Relevant corporate decisions concern a broad...     

The application of system dynamics in different practices of a waste management system

The continuous increase in waste generation warrants global management of waste to reduce the adverse economic, social, and environmental impact of waste while achieving goals for sustainability. The complexity of waste management systems due to different waste management practices renders such systems difficult to analyze. System dynamics (SD) approach aids in conceptualizing and analyzing the structure, interactions, and mode of behavior of the complex systems. The impact of the underlying components can therefore be assessed in an integrated way while the impact of possible policies on the system can be studied to implement appropriate decisions. This review summarizes various applications of SD pertinent to the waste management practices in different countries. Practices may include waste generation, reduction, reuse/recovery, recycling, and disposal. Each study supports regional-demanding targets in environmental, social, and economic scopes such as expanding landfill life span, implementing proper disposal fee, global warming mitigation, energy generation/saving, etc. The interacting variables in the WMS are specifically determined based on the defined problem, ultimate goal, and the type of waste. Generally, population and gross domestic product can increase the waste generation. An increase in waste reduction, source separation, and recycling rate could decrease the environmental impact, but it is not necessarily profitable from an economic perspective. Incentives to separate waste and knowledge about waste management are variables that always have a positive impact on the entire system.

     

Microfiber pollution: an ongoing major environmental issue related to the sustainable development of textile and clothing industry

Environment, Development and Sustainability - Textiles release microfibers to the environment during production, use, and at end-of-life disposal. There is a potentially large and growing risk to...     

Effect of Anthropogenic Factors on the Ability of Narrow-skulled Voles (Lasiopodomys gregalis) to Adapt to Captive Conditions

Russian Journal of Ecology - To test the hypothesis that animals from habitats exposed to high anthropogenic pressure are more successful in adapting to captivity, immature narrow-skulled voles...     

黏土地层联络通道冻结壁厚度优化设计及应用研究*

为解决传统冻结壁设计方法不能真实、合理地反映黏土地层中联络通道冻结壁实际受力情况,进而导致冻结壁厚度设计过于保守的问题,结合黏土地层直墙拱形冻结壁实际受力特点,基于对冻结壁支护压力的合理计算,提出1种适用于黏土地层冻结壁厚度设计的优化方法。结果表明:与传统设计方法相比,该方法所确定冻结壁支护压力与实际施工环境中冻结壁受力状态吻合效果更好,并且能够提供合理的安全储备;经数值计算和现场应用验证,计算所得冻结壁设计方案可以满足施工环境中的承载力及变形稳定性要求;且相较传统设计方案,所得方案兼具安全性与经济性,可有效规避因设计过于保守和冻结周期过长引起的冻胀、融沉变形过大等工程灾害的风险;该方法高效、易行,可为传统冻结壁设计方法提供必要补充,亦可为类似工程的施工设计提供有益参考。     

集输油环境氟橡胶O形圈老化行为实验研究*

为研究氟橡胶O形圈在集输油环境中的老化行为特征,以长庆油田使用的氟橡胶O形圈(位于非金属复合管连接接头处)为研究对象,采用宏观与微观相结合的方法,通过挂片实验分析氟橡胶O形圈在不同介质（采出油,采出水）、温度（25,50 ℃）、压力条件（0.1,4,6 MPa）下老化后的形貌、质量、拉伸性能及硬度。结果表明:采出油、采出水均能引起O形圈发生溶胀,从而降低O形圈的强度、韧性、硬度;采出水引起的溶胀显著高于采出油更易导致O形圈表面产生坑洞缺陷;渗透速率随温度升高而急剧增加,压力对渗透速率的影响不明显;硬度降低较小,最大降幅为4.17%。结合现场服役813 d的密封圈SEM形貌,证实集输介质渗透会引起氟橡胶圈溶胀、导致表面产生坑洞等缺陷。