Metal contamination and solid phase partitioning of metals in urban roadside sediments

This study was undertaken to assess the anthropogenic impact on metal concentrations of urban roadside sediments (N = 633) in Seoul city, Korea and to estimate the potential mobility of selected metals (Zn, Cu, Pb, Cr, Ni, and Cd) using sequential extraction. Comparison of metal concentrations in roadside sediments with mean background values in sediments collected from first- or second-order streams in Korea shows that Zn, Cu and Pb are most affected by anthropogenic inputs. The 206Pb/207Pb ratios of roadside sediments (range = 1.1419-1.1681; mean 1.1576 +/- 0.0068) suggest that Pb is mainly derived from industrial sources rather than from leaded gasoline. A five-step sequential extraction of roadside sediments showed that Zn, Cd and to a lesser degree Ni occur predominantly in the carbonate bound fraction, while Pb is highest in the reducible fraction, Cu in the organic fraction, and Cr in the residual fraction. It was found that the concentrations in the readily available exchangeable fraction were generally low for most metals examined, except for Ni whose exchangeable fraction was appreciable (average 15.2%). Considering the proportion of metals bound to the exchangeable and carbonate fractions, the comparative mobility of metals probably decreases in the order of Zn > Ni > Cd > Pb > Cu > Cr. As potential changes of redox state and pH may remobilize the metals bound to carbonates, reducible, and/or organic matter, and may release and flush them through drain networks into streams, careful monitoring of environmental conditions appears to be very important. With respect to ecotoxicity, it is apparent the Zn and Cu pollution is of particular concern in Seoul city.     

Occurrence of PAHs, PCBs and organochlorine pesticides in the Tonghui River of Beijing, China

Tonghui River, a typical river in Beijing, People's Republic of China, was studied for its water and sediment quality, by determining the levels of 16 polycyclic aromatic hydrocarbons (PAHs), 12 polychlorinated biphenyls (PCBs) and 18 organochlorine pesticides in water and sediment samples. Total PAHs, PCBs and organochlorine pesticides concentrations in water varied from 192.5 to 2651 ng/l, 31.58-344.9 ng/l and 134.9-3788 ng/l, respectively. The total PAHs, PCBs and organochlorine pesticides concentrations in surficial sediments were 127-928 ng/g, 0.78-8.47 ng/g and 1.79-13.98 ng/g dry weight, respectively. The results showed that the concentration of these selected organic pollutants in sediment was higher than those in surface water. It may be due to the fact that organic hydrophobic pollutants tend to stay in the sediments. The PAHs were dominated by 2-, 3-ring components in water samples and by 3- and 4-ring compounds in sediment. For organochlorines, alpha-HCH, delta-HCH, Heptachlor, Endosulfan II, DDT are the major organochlorine pesticides in water while Heptachlor, Dieldrin and DDE composed of 95% of total organochlorine pesticides in sediment. For HCHs (HCHs=alpha-HCH+beta-HCH+gamma-HCH+delta-HCH), the predominance of alpha-HCH of total HCHs were clearly observed in water and sediment. PCB18, PCB31 and PCB52 were predominant in water, on average these compounds collectively accounted for 67% of total PCBs. But in sediment, the predominant compounds were PCB28, PCB31 and PCB153, which accounted for 71% of total PCBs in sediment. The levels of micro pollutants in our study areas were compared with other studies.     

Effect of straw retention on carbon footprint under different cropping sequences in Northeast China

Environmental Science and Pollution Research - Inappropriate farm management practices can lead to increased agricultural inputs and changes in atmospheric greenhouse gas (GHG) emissions, impacting...     

A/O-MBR中硝化活性污泥的富集及其对氧氟沙星的降解作用

采用A/O-MBR系统,逐步提高进水氨氮浓度富集了硝化活性污泥(NAS),在此基础上,考察了COD、烯丙基硫脲(ATU)、氨氮初始浓度及氨氧化速率对NAS降解氧氟沙星(OFL)的影响。结果表明:富集的NAS的氨氧化速率达到了20 mg/(g SS·h)以上,对OFL具有明显降解作用;ATU存在条件下,COD对OFL的去除作用没有影响;提高初始氨氮浓度和NAS氨氧化速率均可以提高OFL降解量;初始氨氮浓度由50 mg/提升至150 mg/L时,OFL降解量由67.26 μg/g提高到82.11 μg/g;氨氧化速率由小于2.5 mg/(g SS·h)提升至大于20 mg/(g SS·h)时,OFL降解量由30.71 μg/g提高到75.16 μg/g。     

Photocatalytic oxidation of triclosan

In the spring of 2003, there was an outbreak of the severe respiratory syndrome (SARS) in Hong Kong. Health concerns have thus triggered an increased and predominant use of various types of household cleansing agents such as triclosan (5-chloro-2-(2,4-dichlorophenoxy)phenol). However, it has been reported recently that triclosan could be photochemically converted to toxic 2,8-dichlorodibenzo-p-dioxin (2,8-Cl(2)DD) in the environment. It is therefore necessary to develop environmentally friendly methods for the treatment of triclosan. To this end, photocatalytic degradation of triclosan in aqueous solution was conducted using TiO(2) (Degussa P25) under irradiation of UV light (lambda < 365 nm). It was found that triclosan could be degraded by this approach. Hydrogen peroxide was added to enhance the degradation process, and the optimal initial hydrogen peroxide concentration for triclosan degradation was 0.005% (w/v). Product identification indicated that triclosan oxidation occurred at its phenol moiety and yielded quinone and hydroquinone intermediates. The formation of a dichlorophenol intermediate in triclosan degradation suggested bond-breaking of the ether linkage occurred during the process. Moreover, no chlorinated dibenzo-p-dioxin congener was detected. These findings confirm that the photocatalytic degradation of triclosan is an environmentally friendly process.     

A combined radical and non-radical oxidation processes for efficient degradation of Acid Orange 7 in the homogeneous Cu(II)/PMS system: important role of chloride

Environmental Science and Pollution Research - Trace copper ion (Cu(II)) in water and wastewater can trigger peroxymonosulfate (PMS) activation to oxidize organic compounds, but it only works under...     

Formation and instability of aerobic granules under high organic loading conditions

The cultivation and instability of aerobic granular sludge in a sequencing batch reactor under high loading conditions were investigated. Compact bacteria-dominated aerobic granules with a mean diameter of 1 mm were formed at a chemical oxygen demand (COD) loading rate of 6.0 kg m(-3) d(-1) within 30 d. However, the compact bacteria-dominated aerobic granules were not stable and transited to large-sized filamentous ones gradually. With the formation of bacteria-dominated granules, the hydrophobicity and specific gravity of the sludge increased. When the granules were transited to filamentous ones, the hydrophobicity and specific gravity decreased. Both granules had a high COD removal efficiency, excellent settling ability and showed a clear, regular round-shaped outline. After the filamentous granules reached a diameter of 16 mm, due to the mass transfer limitation and the possible presence of anaerobes in the inner part of the granules, they began to disintegrate and be washed out of the reactor, follow by failure of the reactor.     

Emission of PCDD/Fs and dioxin-like PCBs from metallurgy industries in S. Korea

The metallurgy industry and municipal waste incinerators are considered the main sources of polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs) in many countries. This study investigated the emission factors and total emissions of PCDD/Fs and dioxin-like polychlorinated biphenyls (PCBs) emitted from metallurgy industries (including ferrous and nonferrous foundries) in Korea. The toxic equivalency (TEQ) emission factor of PCDD/Fs was the highest for secondary copper production, at 24451 ng I-TEQ/ton. The total estimated emissions of PCDD/Fs from these sources were 35.259 g I-TEQ/yr, comprising 0.088 g I-TEQ/yr from ferrous foundries, 31.713 g I-TEQ/yr from copper production, 1.716 g I-TEQ/yr from lead production, 0.111 g I-TEQ/yr from zinc production, and 1.631 g I-TEQ/yr from aluminum production. The total estimated annual amounts of dioxin-like PCBs emitted from these sources were 13.260 g WHO-TEQ/yr, comprising 0.014 g WHO-TEQ/yr from ferrous foundries, 12.675 g WHO-TEQ/yr from copper production, 0.170 g WHO-TEQ/yr from lead production, 0.017 g WHO-TEQ/yr from zinc production, and 0.384 g WHO-TEQ/yr from aluminum production. The highest emission factor was found for secondary copper smelting, at 9770 ng WHO-TEQ/ton.     

Lead adsorption capacities of different components in natural surface coatings

Pb adsorption capacities of Fe oxide, Mn oxide and organic materials in natural surface coatings (biofilms and associated minerals) collected in three lakes, two ponds and a river in Jilin Province, China and Cayuga Lake in US were studied. A novel extraction technique was employed to remove one or more component(s) from the surface coatings. Pb adsorption to surface coatings before and after extraction was performed to determine the adsorptive properties of the extracted component(s). The statistical analysis of observed Pb adsorption was carried out using nonlinear least squares fitting (NLSF) to estimate the Pb adsorption capacity of each component of surface coatings. For each body of water, the estimated Pb adsorption capacity of Mn oxide( mol Pb/mol Mn) was significantly higher than that of Fe oxide( mol Pb/ mol Fe). The value of estimated adsorption capacities of organic materials with the unit mol Pb per kg COD was similar to or less than that of Fe oxides with the unit mol Pb per mol Fe. Comparison of components of surface coatings in different waters showed that the estimated Pb adsorption capacities of components in surface coatings developed in different natural waters were different,especially for Mn oxides.     

Effects of seawater salinity on nitrite accumulation in short-range nitrification to nitrite as end product

The effect of seawater salinity on nitrite accumulation in short-range nitrification to nitrite as the end product was studied by using a SBR. Experimental results indicated that the growth of nitrobacteria was inhibited and very high levels of nitrite accumulation at different salinities were achieved under the conditions of 25--28℃, pH 7.5--8.0, and the influent ammonia nitrogen of 40--70mg/L when seawater flow used to flush toilet was less than 35% (salinity 12393 mg/L, Cl^- 6778mg/L) of total domestic wastewater flow, which is mainly ascribed to much high chlorine concentration of seawater. Results showed that high seawater salinity is available for short-range nitrification to nitrite as the end product. When the seawater flow used to flush toilet accounting for above 70% of the total domestic wastewater flow, the removal efficiency of ammonia was still above 80% despite the removal of organics declined obviously(less than 60% ). It was found that the effect of seawater salinity on the removal of organics was negative rather than positive one as shown for ammonia removal.