污水处理厂中红霉素抗药性基因的污染特征及选择性因子

采用固相萃取-高效液相色谱串联质谱(SPE-HPLC-MS/MS)检测分析了上海某污水处理厂中12种不同药品和个人护理品(pharmaceutical and personal care products,PPCPs)的含量水平和分布特征,采用实时荧光定量PCR方法定量检测分析了7种红霉素抗药性基因(ERY-ARGs)在污水处理厂中的分布和丰度变化.结果表明,在污水处理厂中共检出5种PPCPs(包括磺胺甲唑、红霉素、四环素、卡马西平和三氯生),浓度范围分别为24.5~38.7、47.5~49.2、43.1~85.4、2.5~3.9和423.2~8 973.3ng·L-1.两段A/O生物处理工艺对三氯生具有较好的去除效果,但对其余4种PPCPs的去除效果较差.与此同时,目标ERY-ARGs在污水处理厂中均被检出,在原水中的丰度达9.28×103(erm A)~1.83×108(ere A)copies·L-1,虽然两段A/O工艺能够显著降低污水中的ERY-ARGs(1.19 log~3.97 log),但其在最终处理出水中的浓度仍然较高.通过相关性分析可知,ERY-ARGs与红霉素和三氯生之间均具有显著相关性(P<0.05),表明污水处理厂中红霉素对ERY-ARGs的产生和传播具有重要影响,而三氯生对ERY-ARGs可能存在交叉选择性作用.     

上海市大气细菌污染研究

采用平皿沉降法对上海市６个采用点的大气细菌，进行了为期一年的监测，并进行了菌株鉴定和影响因素的研究分析，结果表明，上海市全年大气细菌数量变化曲线呈双峰型；空气中优势菌群为：微球菌属，葡萄球菌属，奈瑟氏菌属，干燥棒状杆菌属和芽孢杆菌属等。     

球衣细菌胞内PHB的提取和精制

报道了一种从球衣细菌胞内提取和精制PHB的有效方法。通过红外光谱、紫外光谱及1H谱分析得知 ,利用该方法制得的PHB精制品在结构上与标准品 (美国Sigma公司提供 )一致 ,纯度达 99 4 %以上。     

氚水在大豆土壤系统中的迁移与分布

采用模拟污染物的同位素示踪技术研究氚水在大豆-土壤模拟生态系统中的迁移、分布规律.通过为期50d的模拟试验,测定了植物和土壤样品中2种形态氚(自由水氚和结合态氚)的比活度.结果表明:引入土壤中的氚水,不仅在系统各分室间转移和分配,而且迅速向系统外散逸;氚水中的氚以自由水氚和结合态氚形态存在于大豆植株和土壤中;大豆植株中的自由水氚比活度于6h时即达最大值(根19.4Bq·g^-1;茎叶12.3Bq·g^-1),随后便逐渐下降,而结合态氚呈缓慢增加;大豆根中的总氚比活度开始时高于茎叶中的比活度,而后趋于平衡,表层土中2种形态氚基本呈逐渐下降.运用示踪动力学分室模型原理对实验数据拟合得:土壤中的比活度C_s=88.37e^-11.847t+7.38e^-0030t;大豆植株中的比活度C_b=10.30(e^-0.030t-e^-11.847t).     

介质阻挡放电等离子体直接分解NOx的影响因素

在以 γ- Al₂O₃小球作为填充物的介质阻挡放电条件下 ,研究放电电压 ( 9～ 16k V)、交流电源频率 ( 50～ 1600 Hz)、NO入口浓度 ( 50～1800 ml/m³)、气体空速 (1000～ 6500 h^-1)、反应温度 ( 20～250℃ )、介质小球比表面积及加入 O₂等因素对 NO分解率的影响 .发现提高放电电压、放电频率及介质小球比表面积能显著增加 NO分解率 ,O₂ 的加入对 NO的等离子体分解有强抑制作用 .     

pH过程控制对铁炭微电解-Fenton影响中试研究

采用铁炭微电解-Fenton联合工艺处理制药废水生化出水,探讨了初始pH对微电解过程COD降解速率、出水中Fe2+和Fe3+变化规律以及后续Fenton氧化效果的影响,为优化联合工艺提出了微电解反应pH过程控制的理论。采用pH过程控制时,微电解对COD降解速率大大提高,降解过程基本符合零级反应动力学,同时可大大提高Fe2+和Fe3+浓度及总铁析出量。试验结果表明:当初始pH=2.5,以3.0L/h连续性投加稀硫酸100 min,曝气微电解反应2 h,出水再投加1.0mL/L的H2O2进行Fenton氧化2 h,出水COD总去除率可达85.6%;采用pH过程控制可将微电解出水ρ(Fe2+)浓度从48.6 mg/L提高至149 mg/L,COD降解速率从10.9 mg/(L·h)提高至23.8 mg/(L·h)。     

Hydroxyl, hydroperoxyl free radicals determination methods in atmosphere and troposphere

The hydroxyl radical (?OH) has a crucial function in the oxidation and removal of many atmospheric compounds that are harmful to health. Nevertheless, high reactivity, low atmospheric abundance, determination of hydroxyl, and hydroperoxyl radical's quantity is very difficult. In the atmosphere and troposphere, hydroperoxyl radicals (HO₂) are closely demanded in the chemical oxidation of the troposphere. But advances in technology have allowed researchers to improve the determination methods on the research of free radicals through some spectroscopic techniques. So far, several methods such as laser-induced fluorescence (LIF), high-performance liquid chromatography (HPLC), and chemical ionization mass spectroscopy have been identified and mostly used in determining the quantity of hydroxyl and hydroperoxyl radicals. In this systematic review, we have advised the use of scavenger as an advance for further researchers to circumvent some of these problems caused by free radicals. The primary goal of this review is to deepen our understanding of the functions of the most critical free radical (?OH, HO₂) and also understand the currently used methods to quantify them in the atmosphere and troposphere.     

A metal-OH group modification strategy to prepare highly-hydrophobic MIL-53-Al for efficient acetone capture under humid conditions

A series of highly-hydrophobic MIL-53-Al (MIL = Materials of Institut Lavoisier) frameworks synthesized via decoration of the Al-OH groups by alkyl phosphonic acid were developed as adsorbents for removing acetone from humid gas streams. The newly prepared materials were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), N₂ adsorption-desorption and thermogravimetric analysis (TGA). Their adsorption behaviors toward acetone vapor under dry and wet conditions were studied subsequently. Results showed that alkyl phosphonic acid was successfully grafted into MIL-53-Al skeleton through coordinating interaction with Al³⁺ generating [email protected]_x (x = 12, 14, 18). The [email protected]_x exhibited similar crystal structure and thermal stability to parent MIL-53-Al. Furthermore, the modified materials showed significantly enhanced hydrophobicity. The water vapor uptake of [email protected]₁₄ decreased by 72.55% at 75% relative humidity (RH). Dynamic adsorption experiments demonstrated that water vapor had almost no effect on the acetone adsorption performance of [email protected]₁₄. Under the condition of 90% RH, the acetone adsorption capacity of [email protected]₁₄ was 102.98% higher than that of MIL-53-Al. Notably, [email protected]₁₄ presented excellent adsorption reversibility and regeneration performance in 10 adsorption-desorption cycles. Taken together, the strategy of metal-OH group modification is an attractive way to improve the acetone adsorption performance over metal-organic frameworks (MOFs) under humid conditions. Besides, [email protected]₁₄ would be deemed as a promising candidate for capturing acetone in high moisture environment.     

典型西南工业城市柳州市核心区大气污染物时空分布与气象因素研究

为研究柳州市核心区大气污染物浓度时空变化规律与气象因素之间的关系,统计分析了2018年全年研究区内6个自动监测站点PM_(2.5)、PM_(10)、SO_2、NO_2、O_3和CO的浓度监测数据和气象站气象数据,并对28次超标日污染物来源进行了解析.结果显示:①核心区颗粒污染物污染较为严重,且以PM_(2.5)为主的细颗粒污染物仍为柳州市主要的大气污染物;各污染物月均浓度季节差异显著,除NO_2外柳州大气污染物浓度下降明显,指示柳州市多项节能减排综合整治措施成效显著;PM_(2.5)、PM_(10)、CO受早晚高峰期影响,浓度日变化均呈双峰型;NO_2在不同季节峰型不同,作为O_3前体物其浓度日变化与O_3相反,呈现"早峰午谷"的变化趋势.②通过对污染物浓度插值发现,由于核心区主要工商业区位于西部且处于主导风向下风向,故PM_(2.5)和SO_2浓度西北高、东南低,PM_(10)、NO_2和CO浓度西南高、东北低;核心区东部的山区为O_3生成带来大量前体物,使O_3浓度东南高、西北低.③由于气候特征,核心区春、夏季主要气象因素均为降水量;秋季的主要气象因素是风速,风速与污染物的负相关关系表明了风的扩散效应;冬季大部分污染物与气象因素的相关性不显著,表明人为因素对污染物的影响大于气象因素;核心区大气污染物主要来源于局地排放和区域传输,且南北主导风向对大气污染影响最大.④HYSPLIT模型结果指示柳州超标日大气污染物主要来自于珠三角地区,且陆源颗粒物浓度普遍比海洋源高,来自南部的远距离输送气流颗粒物含量最低,表明远距离输送为影响颗粒物传播的主要原因.     

基于GIS的水环境非点源污染模型研究

非点源污染是水环境研究的重点和难点,利用模型对非点源污染进行研究是该项研究的重要内容之一.由于非点源污染具有广泛性、时空异质性和随机性的特点,用常规方法分析、评价、控制和管理有较大难度.随着地理信息系统(GIS)的发展以及非点源污染模型研究的不断深入,二者的结合已在该项研究中取得了一定成果.基于插件式GIS技术、RS技术、空间数据挖掘技术以及空间决策支持系统(SDSS)是非点源模型发展应用的趋势和方向.