南滚河自然保护区的蕨类植物资源及其特点

本文记载了南滚河自然保护区蕨类植物２９科４７属５８种和它们的用途、分布区以及生境因子，并对其地理分布和生态特点进行了分析．     

选择性吸附-高效生物降解法处理含硝基苯与苯酚混合废水

结合NDA-150型树脂（简称树脂）选择性吸附和生物降解的优点,对含硝基苯和苯酚的模拟混合废水（简称混合废水）进行处理。通过树脂的选择性吸附,使混合废水中的硝基苯和苯酚分离,随后用高效菌对树脂所吸附的硝基苯进行生物降解,同时实现树脂的再生。实验结果表明：通过调节混合废水的pH,树脂可有效地将混合废水中的硝基苯和苯酚进行选择性吸附分离;树脂对硝基苯的吸附是可逆的;树脂的再生程度受微生物对可利用硝基苯质量浓度的下限（1．2mg／L）限制;吸附-生物再生循环实验结果表明,该树脂可有效抵抗微生物的生物降解与破坏。     

An improved method used for evaluating potential environmental pollution risk based on spatial distribution and density of farms

Environmental Science and Pollution Research - The livestock manure nitrogen load on farmland (LMNLF) is often used to assess the potential environmental pollution risk of livestock manure nitrogen...     

电子元件制造行业典型危险废物产生节点及处置建议

电子元件制造行业是国家战略性新兴行业,同时也是高污染的行业,其生产工艺具有更新换代快、中间产物多、排污方式复杂等特点.行业危险废物也具有来源多、成分复杂、产生量大等特点,若未经妥善处置而排放到环境中,会对环境造成巨大的危害.通过对印制电路板、铝电解电容器、半导体器件3类典型电子元件的工艺流程进行梳理,分析典型危险废物的...     

生物接触氧化法应急处理原水突发性藻类污染

突发性藻类污染常常伴随着藻类的肆意滋生,从而严重影响着水厂的正常运行,更加威胁着居民用水的水质安全。采用弹性填料生物接触氧化工艺处理含藻原水,分析考察了不同水力停留时间、气水比和藻类浓度条件下反应器对藻类去除效果的影响。结果表明,最佳HRT为1.0 h,最佳气水比为1.2:1;采用最佳工艺条件处理叶绿素a(Chl-a)为70 mg/m3的高藻原水时,Chl-a、CODMn和NH4+-N的去除率分别达到65.48%、47.81%和70.54%,且CODMn和NH4+-N的出水浓度能够达到东深供水工程处理目标。说明在该最佳工艺条件下,原水中藻类能够被有效地控制和去除,出水水质稳定,工艺适应性强。     

还原铁粉/紫外光体系对活性艳红X-3B溶液的脱色

研究了在紫外杀菌灯（λmax=253．7nm,30W）照射下,添加还原铁粉的活性艳红X－3B水溶液的脱色作用。当pH=3．5,铁粉投加量为2．0g／L时,20mg／L活性艳红X－3B溶液在光照180min后的脱色率为79％。脱色为动力学零级反应。染料溶液的pH、铁粉投加量、活性艳红初始浓度对脱色有影响。初步探讨了脱色反应的机理。     

生态条件和瘤胃菌丛密度与纤维分解的关系

在自行设计装配的人工模拟瘤胃发酵装置内，用90523-1瘤胃菌丛进行瘤胃体外发酵试验，结果表明纤维素的分解与瘤胃细菌的密度及其类群变化有着密切关系，都受生态环境条件的制约。在发酵温度40℃，搅拌速度为60～70r／min的条件下搅动20min／h，C／N为10：1的生态条件环境中的细菌密度和纤维素分解率都高于相同生态条件的其它梯度组。     

鄂尔多斯市东胜区2011年春节期间空气污染物的浓度分布规律及其成因分析

利用空气质量自动监测系统分析了2011年春节期间鄂尔多斯市东胜区的SO2、NO2及PM10的浓度值,发现烟花爆竹的燃放对它们的浓度有较大影响。     

三明市区环境空气中可吸入颗粒物的现状分析

应用近两年三明市区环境空气自动监测系统所监测的环境空气中的可吸入颗粒物的大量监测数据,分析总结三明市区可吸入颗粒物的污染现状、规律性,以及可吸颗粒物的主要来源及防治对策。     

Sb release characteristics of the solid waste produced in antimony mining smelting process

Sb release characteristics of blast furnace slag, mining waste rock and tailing sand were investigated in static immersion and dynamic leaching test. These three kinds of waste samples were collected from the antimony mine in Lengshuijiang, China, produced in mining smelting process. Effects of solid/liquid ratio, sample size and pH of leaching solution on Sb release characteristics were inspected based on the analysis of scanning electron microscope, pH and EC of leachate. The optimal parameters for Sb leaching of each sample were analyzed. For blast furnace slag and mining waste rock, Sb release contents increased along with the decline of solid/liquid ratio. The maximum accumulative release contents were 42.13, 34.26 mg/kg at the solid/liquid ratio of 1:20. While Sb release content for tailing sand decreased first and then increased with the reduction of solid/liquid ratio. When the solid/liquid ratio was 1:5, the accumulative Sb release content reached the most (24.30 mg/kg). Sb release content of mining waste rock increased with the drop of leaching solution pH, with the highest accumulative release content of 26.01 mg/kg at pH 2.0. Sb release contents of blast furnace slag and tailing sand showed positive correlation with the variation of leaching solution pH. The maximum accumulative release contents of these two samples were 215.91 and 147.83 mg/kg, respectively, when leaching solution pH was 7.0. In summary, Sb release capacity of the three samples in descending order was tailing sand, blast furnace slag and mining waste rock. pH and EC of the leachate in dynamic test varied independently with the initial pH of leaching solution while showing close relationship with mineral hydrolysis in the waste.