Review of receptor modeling methods for source apportionment

Efforts have been made to relate measured concentrations of airborne constituents to their origins for more than 50 years. During this time interval, there have been developments in the measurement technology to gather highly time-resolved, detailed chemical compositional data. Similarly, the improvements in computers have permitted a parallel development of data analysis tools that permit the extraction of information from these data. There is now a substantial capability to provide useful insights into the sources of pollutants and their atmospheric processing that can help inform air quality management options. Efforts have been made to combine receptor and chemical transport models to provide improved apportionments. Tools are available to utilize limited numbers of known profiles with the ambient data to obtain more accurate apportionments for targeted sources. In addition, tools are in place to allow more advanced models to be fitted to the data based on conceptual models of the nature of the sources and the sampling/analytical approach. Each of the approaches has its strengths and weaknesses. However, the field as a whole suffers from a lack of measurements of source emission compositions. There has not been an active effort to develop source profiles for stationary sources for a long time, and with many significant sources built in developing countries, the lack of local profiles is a serious problem in effective source apportionment. The field is now relatively mature in terms of its methods and its ability to adapt to new measurement technologies, so that we can be assured of a high likelihood of extracting the maximal information from the collected data.

Implications: Efforts have been made over the past 50 years to use air quality data to estimate the influence of air pollution sources. These methods are now relatively mature and many are readily accessible through publically available software. This review examines the development of receptor models and the current state of the art in extracting source identification and apportionments from ambient air quality data.     

PCB exposure and potential future cancer incidence in Slovak children: an assessment from molecular finger printing by Ingenuity Pathway Analysis (IPA®) derived from experimental and epidemiological investigations

The risk of cancer due to PCB exposure in humans is highly debated. In eastern Slovakia, high exposure of the population to organochlorines (especially PCBs) was associated with various disease and disorder pathways, viz., endocrine disruption, metabolic disorder & diabetes, and cancer, thereby disturbing several cellular processes, including protein synthesis, stress response, and apoptosis. We have evaluated a Slovak cohort (45-month children, at lower and higher levels of PCB exposure from the environment) for disease and disorder development to develop early disease cancer biomarkers that could shed new light on possible mechanisms for the genesis of cancers under such chemical exposures, and identify potential avenues for prevention.

Microarray studies of global gene expression were conducted from the 45-month-old children on the Affymetrix platform followed by Ingenuity Pathway Analysis (IPA®) to associate the affected genes with their mechanistic pathways. High-throughput qRT-PCR TaqMan low-density array (TLDA) was performed to further validate the selected genes on the whole blood cells of the most highly exposed children from the study cohort (n = 71).

TP53, MYC, BCL2, and LRP12 differential gene expressions suggested strong relationships between potential future tumor promotion and PCB exposure in Slovak children. The IPA analysis further detected the most important signaling pathways, including molecular mechanism of cancers, prostate cancer signaling, ovarian cancer signaling, P53 signaling, oncostatin M signaling, and their respective functions (viz., prostate cancer, breast cancer, progression of tumor, growth of tumor, and non-Hodgkin’s disease). The results suggest that PCB exposures, even at the early age of these children, may have lifelong consequences for the future development of chronic diseases.

     

Decline of traditional rice farming constrains the recovery of the endangered Asian crested ibis (Nipponia nippon)

Traditional agriculture benefits a rich diversity of plants and animals. The winter-flooded rice fields in the Qinling Mountains, China, are the last refuge for the endangered Asian crested ibis (Nipponia nippon), and intensive efforts have been made to protect this anthropogenic habitat. Analyses of multi-temporal satellite data indicate that winter-flooded rice fields have been continuously reduced across the current range of crested ibis during the past two decades. The rate of loss of these fields in the core-protected areas has unexpectedly increased to a higher level than that in non-protected areas in the past decade. The best fit (R² = 0.87) numerical response model of the crested ibis population shows that a reduction of winter-flooded rice fields decreases population growth and predicts that the population growth will be constrained by the decline of traditional winter-flooded rice fields in the coming decades. Our findings suggest that the decline of traditional rice farming is likely to continue to pose a threat to the long-term survival and recovery of the crested ibis population in China.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-015-0649-5) contains supplementary material, which is available to authorized users.     

Twentieth century droughts and agriculture: Examples from impacts on soybean production in Kentucky,USA

Drought is a significant natural hazard that slowly evolves over time. Because of its character, drought is difficult to monitor and impacts are often poorly documented. Agriculture is one of the most sensitive sectors that are prone to drought. The objective of this research is to assess the impacts of drought on soybean production and revenue in Kentucky. Soybeans are one of Kentucky’s most important commodities. In this study, impacts of 1930–1931, 1940–1942, 1952–1955, 1987–1988, 1999–2000, and 2007 droughts were considered. It was found that over the recent years, up to 56 % of the revenue from soybeans was lost due to drought. During the first half of the twentieth century, revenue loss reached up to 77 %. This research is valuable to the general public as well as planners and policy makers. Proper documentation of impacts of past droughts will help identify drought vulnerabilities and results in better risk management and mitigation.     

The tox is in the detail: technical fundamentals for designing,performing, and interpreting experiments on toxicity of microplastics and associated substances

Over the last 10 years, there has been a plethora of experimental studies estimating the potential of microplastic particles (MPs) to exert toxic effects in the environment, many specifically focusing on their postulated capacity to enhance the transfer of environmental pollutants into organisms after ingestion. Obviously, there is little to no consensus on appropriate experimental design, which is mainly owing to the novelty, the interdisciplinarity of the subject, and the complexity of parameters involved. This results in fundamental discrepancies regarding the materials applied, the approach for spiking MPs with pollutants, and the exact exposure scenario. Aiming for a non-chemist audience and providing illustrative, representative, and comparative examples, this review first outlines the theoretical essentials of processes involved in sorption. Also, it discusses the implications for designing experimental approaches using MPs and interpreting the results obtained under consideration of their relevance for environmental conditions. It may help to improve the interpretation of studies on MP toxicity already published, while also calling experimenters’ attention to various aspects important to consider when designing and performing environmentally relevant experiments with MPs.

     

Circumpolar status of Arctic ptarmigan: Population dynamics and trends

Rock ptarmigan (Lagopus muta) and willow ptarmigan (L. lagopus) are Arctic birds with a circumpolar distribution but there is limited knowledge about their status and trends across their circumpolar distribution. Here, we compiled information from 90 ptarmigan study sites from 7 Arctic countries, where almost half of the sites are still monitored. Rock ptarmigan showed an overall negative trend on Iceland and Greenland, while Svalbard and Newfoundland had positive trends, and no significant trends in Alaska. For willow ptarmigan, there was a negative trend in mid-Sweden and eastern Russia, while northern Fennoscandia, North America and Newfoundland had no significant trends. Both species displayed some periods with population cycles (short 3–6 years and long 9–12 years), but cyclicity changed through time for both species. We propose that simple, cost-efficient systematic surveys that capture the main feature of ptarmigan population dynamics can form the basis for citizen science efforts in order to fill knowledge gaps for the many regions that lack systematic ptarmigan monitoring programs.

     

Revisions to the derivation of the Australian and New Zealand guidelines for toxicants in fresh and marine waters

The Australian and New Zealand Guidelines for Fresh and Marine Water Quality are a key document in the Australian National Water Quality Management Strategy. These guidelines released in 2000 are currently being reviewed and updated. The revision is being co-ordinated by the Australian Department of Sustainability, Environment, Water, Population and Communities, while technical matters are dealt with by a series of Working Groups. The revision will be evolutionary in nature reflecting the latest scientific developments and a range of stakeholder desires. Key changes will be: increasing the types and sources of data that can be used; working collaboratively with industry to permit the use of commercial-in-confidence data; increasing the minimum data requirements; including a measure of the uncertainty of the trigger value; improving the software used to calculate trigger values; increasing the rigour of site-specific trigger values; improving the method for assessing the reliability of the trigger values; and providing guidance of measures of toxicity and toxicological endpoints that may, in the near future, be appropriate for trigger value derivation. These changes will markedly improve the number and quality of the trigger values that can be derived and will increase end-users’ ability to understand and implement the guidelines in a scientifically rigorous manner.     

Evaluation of Dust Generated from Basic Oxygen Furnace Steel Making

Abstract

A detailed characterization has been made of the dust generated during steel making in basic oxygen furnaces (BOF). Chemical composition and particle size distribution have been analyzed. X-ray diffraction, scanning electron microscopy, and electron probe micro-analysis techniques have been used to identify the morphology and the nature of the major iron-bearing phases as well as the gangue constituents. The dust characteristics have been found to be widely different, depending on the type of process used in BOF steel making, namely, suppressed combustion or total combustion. The type of dust abatement system (dry or wet) additionally influences the nature of the gangue constituents. The possibility of utilizing the iron-bearing major phases has been examined.     

Treatment of wastewater from red and tropical fruit wine production by zeolite anaerobic fluidized bed reactor

A study of the anaerobic treatment of wastewaters derived from red (RWWW) and tropical fruit wine (TFWWW) production was carried out in four laboratory-scale fluidized bed reactors with natural zeolite as bacterial support. These reactors operated at mesophilic temperature (35°C). Reactors R1 and R2 contained Chilean natural zeolite, while reactors R3 and R4 used Cuban natural zeolite as microorganism support. In addition, reactors R1 and R3 processed RWWW, while reactors R2 and R4 used TFWWW as substrate. The biomass concentration attached to zeolites in the four reactors studied was found to be in the range of 44–46 g volatile solids (VS)/L after 90 days of operation time. Both types of zeolites can be used indistinctly in the fluidized bed reactors achieving more than 80%–86% chemical oxygen demand (COD) removals for organic loading rates (OLR) of up to at least 20 g COD/L d. pH values remained within the optimal range for anaerobic microorganisms for OLR values of up to 20 and 22 g COD/L d for RWWW and TFWWW, respectively. Toxicity and inhibition levels were observed at an OLR of 20 g COD/L d in reactors R1 and R3 while processing RWWW, whereas the aforementioned inhibitory phenomena were not observed at an OLR of 24 g COD/L d in R2 and R4, treating TFWWW as a consequence of the lower phenolic compound content present in this substrate. The volatile fatty acid (VFA) levels were always lower in reactors processing TFWWW (R2 and R4) and these values (< 400 mg/L, as acetic acid) were lower than the suggested limits for digester failure. The specific methanogenic activity (SMA) was twice as high in reactors R2 and R4 than in R1 and R3 after 120 days of operation when all reactors operated at an OLR of 20 g COD/L d.     

Development of controlled release formulations of azadirachtin-A employing poly(ethylene glycol) based amphiphilic copolymers

Controlled release (CR) formulations of azadirachtin-A, a bioactive constituent derived from the seed of Azadirachta indica A. Juss (Meliaceae), have been prepared using commercially available polyvinyl chloride, polyethylene glycol (PEG) and laboratory synthesized poly ethylene glycol–based amphiphilic copolymers. Copolymers of polyethylene glycol and various dimethyl esters, which self assemble into nano micellar aggregates in aqueous media, have been synthesized. The kinetics of azadirachtin-A, release in water from the different formulations was studied. Release from the commercial polyethylene glycol (PEG) formulation was faster than the other CR formulations. The rate of release of encapsulated azadirachtin-A from nano micellar aggregates is reduced by increasing the molecular weight of PEG. The diffusion exponent (n value) of azadirachtin-A, in water ranged from 0.47 to 1.18 in the tested formulations. The release was diffusion controlled with a half release time (t_1/2) of 3.05 to 42.80 days in water from different matrices. The results suggest that depending upon the polymer matrix used, the application rate of azadirachtin-A can be optimized to achieve insect control at the desired level and period.