The application of system dynamics in different practices of a waste management system

The continuous increase in waste generation warrants global management of waste to reduce the adverse economic, social, and environmental impact of waste while achieving goals for sustainability. The complexity of waste management systems due to different waste management practices renders such systems difficult to analyze. System dynamics (SD) approach aids in conceptualizing and analyzing the structure, interactions, and mode of behavior of the complex systems. The impact of the underlying components can therefore be assessed in an integrated way while the impact of possible policies on the system can be studied to implement appropriate decisions. This review summarizes various applications of SD pertinent to the waste management practices in different countries. Practices may include waste generation, reduction, reuse/recovery, recycling, and disposal. Each study supports regional-demanding targets in environmental, social, and economic scopes such as expanding landfill life span, implementing proper disposal fee, global warming mitigation, energy generation/saving, etc. The interacting variables in the WMS are specifically determined based on the defined problem, ultimate goal, and the type of waste. Generally, population and gross domestic product can increase the waste generation. An increase in waste reduction, source separation, and recycling rate could decrease the environmental impact, but it is not necessarily profitable from an economic perspective. Incentives to separate waste and knowledge about waste management are variables that always have a positive impact on the entire system.

     

Does haze pollution affect public health in China from the perspective of environmental efficiency?

Environment, Development and Sustainability - This study attempts to introduce haze pollution into the environmental efficiency evaluation framework and measures PM2.5 environmental efficiency in...     

安全风险分级防控在油气开发领域的探索与应用

为推动油气开发领域安全风险分级防控有效落地,提高风险预控能力,本文基于风险防控现状评估结果,探索性地研究安全风险分级防控思路,构建了油气开发领域安全风险分级防控体系推进模型,提出了逆向与正向危害因素识别方法,明确了风险评价关键隐性过程原则,构建了风险-后果-能资分级防控决断模型。选取典型试点单位进行实践,结果证明,油气开发领域安全风险分级防控体系推进模型是科学合理的,其他领域也可借鉴该模型开展安全风险分级防控工作。     

基于BP神经网络的受限空间火灾联合探测方法

针对航空受限空间火灾探测高误报的问题,在现有技术成果基础上对多种火灾探测方式进行研讨,并提出1种基于BP神经网络技术的飞机机身内部受限空间火灾联合探测报警方法。该方法结合现有烟雾感应、气体传感器探测等常用火灾探测技术,以红外热成像探测为辅助手段,采用神经网络实现数据融合,对模拟实验舱火灾烟雾进行联合探测,在单一火灾探测方式基础上提高了探测准确率。     

隧道竖井外流场模拟及风塔外型结构优化研究

为提高长大隧道施工及运营通风过程中竖井通风效率,实现隧道节能通风。依托实际隧道工程,基于Fluent软件,选用RNG k-ε湍流模型,对无竖井风塔、圆柱风塔、矩形风塔和凸台状风塔4种结构、不同环境风速工况下的流场进行数值模拟,并对模拟结果进行交叉比对分析,提出最优化的竖井风塔结构形式。研究结果表明:采用风塔结构竖井出流量要远大于无风塔结构竖井出流量;对于不同竖井风塔外型结构,竖井出流量与环境风速关系呈多项式函数;当倾斜角为45°、圆心角为90°时,凸台结构对应竖井出流量最大,且受环境风影响波动较小,通风稳定性较好。建议竖井出口结构选用矩形或凸台状,实现对环境风的高效利用,提高竖井通风效率。     

单芯铜线过电流故障电弧熔痕的微观特征研究*

为准确认定电气火灾中过电流故障,模拟4~7倍额定电流（Ie）条件下单芯铜导线过电流故障,利用光学显微镜和扫描电子显微镜（SEM）分析过电流故障电弧熔痕的组织特征,并结合Image-Pro Plus软件测定晶粒直径、周长和面积,探究金相组织的量化判据和变化规律。结果表明:当I＝4Ie时,过电流故障电弧熔痕的金相组织主要为方向性较强的树枝晶;当I＝5Ie,6Ie时,金相组织内树枝晶占比减小,胞状晶占比升高;当I＝7Ie时,方向性较弱的胞状晶占主导。随着电流增加,晶粒的平均直径、周长和面积均呈增长趋势。通过火灾案例分析可知,实验结果与现场的电弧熔痕组织特征基本相符,验证火灾事故原因为过电流故障。     

隧道救援站通风网络优化设计及人员疏散研究*

为确定铁路隧道救援站最佳通风结构,对烟道布置提出合理建议,采用计算流体力学（CFD）的方法,对铁路隧道救援站通风网络进行优化设计。同时,采用模拟计算的方法对救援站人员疏散进行模拟分析,确定救援横通道布置及防护门开度设置的合理性。研究结果表明:在同等通风参数工况设置下,采用多节点排烟竖井结构后各救援横通道流量分配更均匀,救援站压力平衡性更好,通风效率可提升15%;通过疏散模拟证实,在长560 m的紧急救援站范围内设置10条疏散横通道,横通道设1.7 m宽的逃生门能够满足疏散要求。     

一起塔式起重机冲顶事故的技术分析

某桥梁施工企业在对桥面施工时,塔式起重机空载起升发生冲顶事故,起升钢丝绳断裂,造成吊钩装置坠落砸死1人伤害事故.本文介绍了事故情况、事故勘查要点和模拟试验及相关计算方法,分析事故技术原因,提出预防事故的建议.     

Effect of pipes in heat pump system on electric vehicle energy saving

ABSTRACT

Refrigerant pressure drop and temperature change in pipes are normally ignored in the thermodynamic analysis of traditional vehicle air conditioning system, this will result in serious errors. In this Paper, pressure drop and temperature difference are simulated in different pipes of electric vehicle (EV) heat pump system to analysis the effects of pipes in the actual EV heat pump system. The results indicate that the greater the mass flow, the faster pressure drop increases, the temperature difference decreases. Pressure drop of saturated liquid refrigerant is smaller than that of saturated gas refrigerant at the same saturation pressure and mass flow rate. The higher the refrigerant pressure (no phase change), the slower pressure drop decreases, the faster the temperature difference decreases. Pressure drop decreases with the increment of bending angle of the pipe. For EV heat pump system, suitable valves and less branches are helpful for energy saving of the system. Shortening the pipe between compressor and condenser can reduce temperature change obviously. Pressure drop per unit length in the pipe between evaporator and compressor is large especially in heating mode because of lower refrigerant density. It even reaches to over 100 times of that in the pipe between condenser and throttle valve in heating mode and has negative effects on the performance of the system. If the evaporator is closer to the compressor and the number of branches is less, then pressure drop will decrease a lot, which will be advantageous for energy saving of the heat pump system.     

基于农村生活污水生态处理工艺研究

伴随我国经济发展的进步,虽然农村的生活水平得到一定的改善,但是并没有根据实际情况将相关生态处理技术应用,导致农村污水处理的效率无法有效的提升,严重影响农村的发展。基于此,本文主要分析了农村生活污水处理的方式,以及污水处理不当对人们的危害与影响,并阐述了农村污水处理的主要对策与方案,笔者根据自身经验提出相应的建议与意见。