SF6设备中分解产物分析研究

针对SF₆设备运行中出现的问题,对SF₆气体分解产物的含量情况进行分析研究,为SF₆设备的在线诊断分析提供可靠数据。结果表明:SF₆气体分解产物的含量分析结果可作为设备故障分析和状态检修的参考依据。     

南漪湖上覆水溶解性有机质的光谱特征

为考察南漪湖上覆水中溶解性有机质(DOM)的光谱特征与来源,采用紫外-可见光吸收光谱(UV-Vis)与三维荧光光谱(EEMs)为工具,并结合平行因子分析(PARAFAC)、荧光区域积分分析(FRI)、相关性分析、主成分分析与聚类分析对DOM进行定性与定量分析.结果显示,UV-Vis参数a(440)、E₂/E₃、E₃/E₄、S_R表明DOM具有腐殖化特征与自生源特征,且E₂/E₃、E₃/E₄与a(440)呈显著正相关关系(P<0.01,P<0.05),S_R与a(440)无显著相关关系(P>0.05),说明腐殖酸浓度越高则DOM相对分子量越大,但无法依据腐殖酸浓度大小判断DOM来源.根据a(440)计算获得溶解性有机碳(DOC)平均浓度为26.79mg/L,且该湖泊出口附近DOC浓度为10.15mg/L.荧光指数(β:α、FI、BIX、HIX、Fn (280)、Fn (355))显示该湖泊DOM具有腐殖化程度较低及强自生源特征,类蛋白组分(Fn (280))相对浓度的空间分布上由西向东逐渐增大,而腐殖酸类组分(Fn (355))相对浓度峰值出现在入湖口与出湖口.通过PARAFAC解析出3种组分,分别为类富里酸(C1)、类色氨酸(C2)和类腐殖酸(C3),且C1、C2、C3含量分别占总组分强度21.96%、13.36%、84.21%.FRI法分析显示类蛋白物质所占比例之和(区域I+II)为49.65%,该结果说明水体已受到了人为因素影响.通过相关性分析结果显示,C1、C3与β:α、BIX呈显著负相关系(P<0.001),C2与β:α、BIX、Fn (355)呈正相关系(P<0.001).通过主成分分析与聚类分析,南漪湖上覆水中DOM在16个位点间呈现不同特征,但整体上水体中DOM来源受内源输入影响较为显著,应加强该湖泊内源释放污染物控制与管理.     

Dicarboxylic acids and related compounds in fine particulate matter aerosols in Huangshi,central China

PM_2.5 (particulate matter with an aerodynamic diameter <2.5 μm) samples were collected in Huangshi, central China, from March 2012 to February 2013 and were analyzed for dicarboxylic acids (diacids) and related compounds (DARCs). Oxalic acid (C₂; 416 ng m^?3) was the most abundant species, followed by phthalic (Ph; 122 ng m^?3), terephthalic (tPh; 116 ng m^?3), succinic (C₄; 70.4 ng m^?3), azelaic (C₉; 67.9 ng m^?3), and adipic (C₆; 57.8 ng m^?3) acids. Relatively high abundances of Ph and tPh differed from the distribution in urban and marine aerosols, indicating contributions from nearby anthropogenic sources. Glyoxylic acid (ωC₂; 41.4 ng m^?3) was the dominant oxoacid, followed by 9-oxononanoic (ωC₉; 40.8 ng m^?3) and pyruvic (Pyr; 24.1 ng m^?3) acids. Glyoxal (Gly; 35.5 ng m^?3) was the dominant α-dicarbonyl. Highest average concentrations were found for C₂, ωC₂, and C₉ in autumn, for C₄, for Pyr and C₆ in spring, for Ph, ωC₉, and Gly in summer, whereas the lowest values were observed in winter. Seasonal variations and correlation coefficients of DARCs demonstrate that both primary emissions and secondary production are important sources. Principal component analysis of selected DARCs species suggests that a mixing of air masses from anthropogenic and biogenic sources contribute to the Huangshi aerosols.

Implications: Both primary emissions and secondary production are important sources of diacids and related compounds in PM_2.5 from Huangshi, central China. Principal component analysis of selected diacids in Huangshi aerosols suggests that mixing of air masses from anthropogenic and biogenic sources contribute to ambient aerosols in central China.     

Novel synthetic approaches and TWC catalytic performance of flower-like Pt/CeO2

A novel Ultrasonic Assisted Membrane Reduction （UAMR）-hydrothermal method was used to prepare flower-like Pt/CeO2 catalysts. The texture, physical/chemical properties, and reducibility of the flower-like Pt/CeO2 catalysts were characterized by X-Ray Diffraction （XRD）, Scanning Electron Microscope （SEM）, Transmission Electron Microscope （TEM）, N2 adsorption, and hydrogen temperature programmed reduction （HE-TPR） techniques. The catalytic performance of the catalysts for treating automobile emission was studied relative to samples prepared by the conventional wetness impregnation method. The Pt/CeO2 catalysts fabricated by this novel method showed high specific surface area and metal dispersion, excellent three-way catalytic activity, and good thermal stability. The strong interaction between the Pt nanoparticles and CeO2 improved the thermal stability. The Ce4＋ ions were incorporated into the surfactant chains and the Pt nanoparticles were stabilized through an exchange reaction of the surface hydroxyl groups. The SEM results demonstrated that the Pt/CeO2 catalysts had a typical three-dimensional （3D） hierarchical porous struc- ture, which was favorable for surface reaction and enhanced the exposure degree of the Pt nanoparticles. In brief, the flower-like Pt/CeO2 catalysts prepared by UAMR-hydrothermal method exhibited a higher Pt metal dispersion, smaller particle size, better three-way catalytic activity, and improved thermal stability versus conven- tional materials.     

Arbuscular mycorrhizal fungus-induced decrease in nitrogen concentration in pore water and nitrogen leaching loss from red soil under simulated heavy rainfall

Environmental Science and Pollution Research - Arbuscular mycorrhizal fungus (AMF) is generally colonized in plant roots and influences the migration of mineral elements such as nitrogen (N) in...     

Interaction between β-lactam antibiotic and phosphorus-accumulating organisms

Environmental Science and Pollution Research - β-Lactam antibiotics have been widely used in clinic due to strong antibacterial activity with mild adverse side effects and have been detected...     

Decomplexation of Cr(III)-EDTA and simultaneous abatement of total Cr by photo-oxidation: efficiency and in situ reduction of intermediate Cr(VI)

Environmental Science and Pollution Research - Most prevailing processes are incapable of removing Cr(III)-organic complexes efficiently and facing the problem of in-process formation of highly...     

Contamination levels and human health risk assessment of toxic heavy metals in street dust in an industrial city in Northwest China

This study investigated the content, distribution, and contamination levels of toxic metals (Cd, Cr, Cu, Pb, and Zn) in street dust in Lanzhou, an industrial city in Northwest China. Meanwhile, the risk these metals posed to the urban ecosystem and human health was also evaluated using the potential ecological risk index and human exposure model. Results showed that concentrations of these metals in the dust are higher than the background value of local soil, with Cu having the highest levels. The districts of Anning and Xigu had the most extreme levels of contamination, while Chengguan and Qilihe districts were lightly contaminated, which can be partly attributed to human activities and traffic densities. In comparison with the concentrations of selected metals in other cities, the concentrations of heavy metals in Lanzhou were generally at moderate or low levels. Heavy metal concentration increased with decreasing dust particle size. The pollution indices of Cr, Cd, Cu, Pb, and Zn were in the range of 0.289–2.09, 0.332–2.15, 1.38–6.21, 0.358–2.59, and 0.560–1.83 with a mean of 1.37, 1.49, 3.18, 1.48, and 0.897, respectively. The geo-accumulation index (I _geo) suggested that Zn in street dust was of geologic origin, while Cd, Cr, Pb, and Cu were significantly impacted by anthropogenic sources. The comprehensive pollution index showed that urban dust poses a high potential ecological risk in Lanzhou. Non-carcinogenic and carcinogenic effects due to exposure to urban street dust were assessed for both children and adults. For non-carcinogenic effects, ingestion appeared to be the main route of exposure to dust particles and thus posed a higher health risk to both children and adults for all metals, followed by dermal contact. Hazard index values for all studied metals were lower than the safe level of 1, and Cr exhibited the highest risk value (0.249) for children, suggesting that the overall risk from exposure to multiple metals in dust is low. The carcinogenic risk for Cd and Cr was all below the acceptable level (< 10⁻⁶).

     

江苏省地震科学数据共享平台技术研究

本文利用分布式数据库技术着力研究和开发了江苏省地震局的测震数据库、前兆数据库的共享、管理与集中发布技术。主要运用JSP（Java Server Page）技术及PHP（Hypertext Preprocessor）语言对测震的JOPENS系统中MySQL数据库、EQIM数据库、及前兆Oracle数据库等进行进一步地开发。搭建了一个行业内跨计算机操作平台的可视化的地震科技数据共享、交换及管理平台,实现了多种地震科学数据的（例如近、远震地震信息、各学科的运行率等）在线可视化、基于Google Map检索的地震信息服务等。     

株洲典型功能区土壤重金属污染及其生态风险

该研究采集株洲典型城市功能区工业区和农林综合利用区的农用土样,对土壤中Pb、Cd、Hg、As进行分析,采用内梅罗指数法和多指标生态评价法评价了土壤的污染状况和生态风险,结果表明:工业区周边农用土壤的污染程度显著高于农林综合利用区,不同功能区的污染特征极为相似,即:均以Cd和Hg为主要污染物,内梅罗指数评价为重度污染,As为轻度污染,且耕地的污染程度显著高于林地,工业区周边79%的耕地样点、71%的林地样点,农林综合利用区54%的耕地样点、43%的林地样点,内梅罗综合污染指数值大于6,复合污染严重,达强生态危害。含重金属废水灌溉以及Pb,Cd气型污染物的迁移沉降是土壤重金属富集的主要途径。文章就菜地和稻田土壤的生态危害,提出生态风险防范措施。