Occurrence and migration of microplastics and plasticizers in different wastewater and sludge treatment units in municipal wastewater treatment plant

● Reduce the quantifying MPs time by using Nile red staining. ● The removal rate of MPs and PAEs in wastewater and sludge were investigated. ● MPs and PAEs were firstly analyzed during thermal hydrolysis treatment. ● The removal of PAEs from wastewater and sludge was mainly biodegradation. Microplastics (MPs) and plasticizers, such as phthalate esters (PAEs), were frequently detected in municipal wastewater treatment plants (MWTP). Previous research mainly studied the removal of MPs and PAEs in wastewater. However, the occurrence of MPs and PAEs in the sludge was generally ignored. To comprehensively investigate the occurrence and the migration behaviors of MPs and PAEs in MWTP, a series of representative parameters including the number, size, color, shape of MPs, and the concentrations of PAEs in wastewater and sludge were systematically investigated. In this study, the concentrations of MPs in the influent and effluent were 15.46±0.37 and 0.30±0.14 particles/L. The MP removal efficiency of 98.1% was achieved and about 73.8% of MPs were accumulated in the sludge in the MWTP. The numbers of MPs in the sludge before and after digestion were 4.40±0.14 and 0.31±0.01 particles/g (dry sludge), respectively. Fourier Transform Infrared Spectroscopy (ATR FT-IR) analysis showed that the main types of MPs were polyethylene terephthalate (PET), polypropylene (PP), polyethylene (PE), and polystyrene (PS). Six PAEs, including phthalate (DMP), diethyl phthalate (DEP), diisobutyl phthalate (DIBP), ortho dibutyl phthalate (DBP), butyl benzyl phthalate (BBP), and bis(2-ethyl) hexyl phthalate (DEHP), were detected in the MWTP. The concentrations of total PAEs (ΣPAEs) in the influent and effluent were 76.66 and 6.28 µg/L, respectively. The concentrations of ΣPAEs in the sludge before and after digestion were 152.64 and 31.70 µg/g, respectively. In the process of thermal hydrolysis, the number and size of MPs decreased accompanied by the increase of the plasticizer concentration.     

新疆草地资源特征与生态治理

从新疆草地资源发生条件分析其多样性,对草地退化进行了生态分析,提出了草地生态恢复的生态置换理论与实施方案。     

改良型Carrousel氧化沟工艺生物脱氮除磷效果研究

为了提高改良型Carrousel氧化沟工艺污水处理厂的脱氮除磷效果,结合某污水处理厂3年的运行实践,讨论了该工艺的处理效果,生物脱氮除磷原理及影响出水效果的因素.分析表明将DO控制在0.3～0.7 mg/L范围内,能够使出水中的TN浓度低于20 mg/L;在氧化沟中发生的同步硝化反硝化反应(SND)对总氮的去除的贡献占总系统脱氮的66%;该系统剩余污泥的含磷率为3.0%,生物细胞中平均含磷量可达细胞干重的4.2%;总磷去除率与污泥龄具有很好的线性关系,加大污泥排放量可以提高除磷效果.     

浅谈GAM与GM（1,1）模型

对ＧＡＭ水环境预测模型提出了四点不同看法，与有关作者商榷，指出ＧＭ（１，１）模型与ＧＡＭ模型二者并无优劣之差，精度亦相当。     

An improved method used for evaluating potential environmental pollution risk based on spatial distribution and density of farms

Environmental Science and Pollution Research - The livestock manure nitrogen load on farmland (LMNLF) is often used to assess the potential environmental pollution risk of livestock manure nitrogen...     

Mercury uptake by Paspalum distichum L. in relation to the mercury distribution pattern in rhizosphere soil

Environmental Science and Pollution Research - Paspalum distichum L. was tested to evaluate their phytoremediation capacity for Hg contaminated soil through analyzing the dissipation of Hg in soil...     

Ce-ZnO/AC在真空紫外下催化降解对二甲苯废气

将Ce掺杂ZnO光催化剂通过负载活性炭 (AC)的方式制备Ce-ZnO/AC吸附-催化复合材料,并以对二甲苯为典型挥发性有机污染物(VOC),研究其在真空紫外体系中光催化转化性能。结果表明：活性炭的负载能有效提高臭氧的利用效率,强化对二甲苯的去除率和矿化率;当Ce-ZnO与活性炭的负载比例为1∶2时,复合材料的光催化性能达到最优,此时对二甲苯的转化率达到95%以上;活性炭的负载不仅可使污染物与催化剂充分接触,还可有效利用臭氧从而产生·OH等自由基,协同促进对二甲苯的降解,同时更多的中间产物被降解。复合催化材料显示了良好的稳定性,在利用5次后,仍可再生恢复其光催化性能至初始状态。相对于单独的真空紫外光解,Ce-ZnO/AC吸附-催化复合材料与真空紫外体系耦合降解二甲苯的能量利用率提高了2倍,经济性好。     

广州大坦沙污水处理厂挥发有机物的去除及其向空气中的排放

对广州大坦沙污水处理厂各工艺阶段污水中挥发性有机物(VOCs)的测试表明,进水中主要有害VOCs为苯系物和卤代烃;进水和出水比较,苯 甲苯、乙苯、二甲苯(合称BTEX) 的去除率接近100%,污水中几种主要卤代烃的去除效率范围为79%—89%.VOCs主要的去除作用发生在生物反应池,特别是厌氧阶段,本研究还对污水处理厂几种典型挥发有机物排放到周围空气中的量进行了理论估计,计算表明卤代烃进入空气中的比例高于BTEX.     

A pyrazine based metal-organic framework for selective removal of copper from strongly acidic solutions

● pz-UiO-66 was synthesized facilely by a solvothermal method. ● Efficient capture of copper from highly acidic solution was achieved by pz-UiO-66. ● pz-UiO-66 exhibited excellent selectivity and capacity for copper capture. ● Pyrazine-N in pz-UiO-66 was shown to be the dominant adsorption site. The selective capture of copper from strongly acidic solutions is of vital importance from the perspective of sustainable development and environmental protection. Metal organic frameworks (MOFs) have attracted the interest of many scholars for adsorption due to their fascinating physicochemical characteristics, including adjustable structure, strong stability and porosity. Herein, pz-UiO-66 containing a pyrazine structure is successfully synthesized for the efficient separation of copper from strongly acidic conditions. Selective copper removal at low pH values is accomplished by using this material that is not available in previously reported metal–organic frameworks. Furthermore, the material exhibits excellent adsorption capacity, with a theoretical maximum copper uptake of 247 mg/g. As proven by XPS and FT-IR analysis, the coordination of pyrazine nitrogen atoms with copper ions is the dominant adsorption mechanism of copper by pz-UiO-66. This work provides an opportunity for efficient and selective copper removal under strongly acidic conditions, and promises extensive application prospects for the removal of copper in the treatment for acid metallurgical wastewater.     

Synthesis of branched allylic sulfones by regioselective boron-catalysed hydrosulfonylation

Environmental Chemistry Letters - Branched allylic sulfones are scaffolds widely distributed in bioactive molecules and organic functional materials. The synthesis of allylic sulfones has been...