高效液相色谱-电感耦合等离子体质谱法测水中不同形态砷

采用高效液相色谱(HPLC)分离水中两种常见的砷形态As(III)、As(V),电感耦合等离子体质谱系统进行检测鉴定,利用C8色谱柱,探讨了甲醇含量、磷酸二氢钾浓度、四丁基氢氧化铵浓度、p H等测试条件,由此建立了水中砷形态的分析方法。结果表明,以1.5 mmol/L磷酸二氢钾、2 mmol/L四丁基氢氧化铵(TBAOH)、5%甲醇作为流动相,调节流动相为p H 5.5,流速为1.4 m L/min,上述两种不同形态的砷可在5.5 min内得以有效分离,As(III)、As(V)检出限分别为0.001、0.01μg/L,定量下限分别为0.005、0.03μg/L。该方法实现了对水中常见的不同形态砷(As(III)、As(V))的同时分析,具有灵敏度高、选择性好、检测速度快的特点,在水质分析领域具有重要意义与应用价值。     

建设近岸海域水质自动监测系统应考虑的几个问题

在近岸海域自动监测系统建设前,需要明确建设自动监测系统的目的性;从人员、经费、技术性能等方面综合分析开展自动监测系统建设和运行的可行性分析;同时考虑监测子站建成后仪器设备的安全问题,以保证自动监测系统能够发挥应有的作用。     

Adsorptive conversion of nitrogen dioxide from etching vent gases over activated carbon

Some metal etching operations emit limited flow rates of waste gases with reddish-brown NO₂ fume, which may cause visual and acidic-odor complaints, as well as negative health effects. In this study, tests were performed by passing caustic-treated waste gases vented from Al-etching operations through columns packed either with virgin or regenerated granular activated carbon (GAC) to test their adsorptive conversion performance of NO₂ in the gases. The gases contained 5–55 ppm NO₂ and acetic and nitric acids of below 3 ppm. Exhausted carbon was regenerated by scrubbing it with caustic solution and water, and dried for further adsorption tests. Results indicate that with an (empty bed residence time (EBRT) of 0.15 sec for the gas through the GAC-packed space, around 60% of the influent NO₂ of 54 ppm could be removed, and 47% of the removed NO₂ was converted by and desorbed from the carbon as NO. GAC used in the present study could be regenerated at least twice to restore its capacity for NO₂ adsorption. Within EBRTs of 0.076–0.18 sec, the adsorptive conversion capacity was linearly varied with EBRT. In practice, with an EBRT of 0.20 sec, a conversion capacity of 0.80 kg NO₂ (kg GAC)^?1 with an influent NO₂ of 40 ppm can be used as a basis for system design.

Implications: Some metal etching operations emit waste gases with reddish-brown (yellow when diluted) NO₂ fume which may cause visual and acidic-odor complaints, as well as negative health effects. This study provides a simple process for the adsorptive conversion of NO₂ in caustic-treated waste gases vented from metal-etching operations through a GAC column. With an EBRT of 0.20 sec, a conversion capacity of 0.80 kg NO₂ (kg GAC)^?1 with an influent NO₂ of 40 ppm can be used as a basis for system design. Saturated GAC can be regenerated at least twice by simply scrubbing it with aqueous caustic solution.     

A mini review of fluoride-induced apoptotic pathways

Fluorine or fluoride can have toxic effects on bone tissue and soft tissue at high concentrations. These negative effects include but not limited to cytotoxicity, immunotoxicity, blood toxicity, and oxidative damage. Apoptosis plays an important role in fluoride-induced toxicity of kidney, liver, spleen, thymus, bursa of Fabricius, cecal tonsil, and cultured cells. Here, apoptosis activated by high level of fluoride has been systematically reviewed, focusing on three pathways: mitochondrion-mediated, endoplasmic reticulum (ER) stress-mediated, and death receptor-mediated pathways. However, very limited reports are focused on the death receptor-mediated apoptosis pathways in the fluoride-induced apoptosis. Therefore, understanding and discovery of more pathways and molecular mechanisms of fluoride-induced apoptosis may contribute to designing measures for preventing fluoride toxicity.     

基于GIS与栅格数据的安徽省人居环境自然适宜性测评

科学度量人居环境自然背景的适宜性,有助于合理引导人口分布与流动,促进区域人口、资源环境协调发展。运用GIS技术,以250 m×250 m栅格为基本单元,选取气候、地形、水文、地被、自然灾害等因子,构建人居环境自然适宜性评价模型,定量测评安徽省人居环境自然适宜程度,剖析各类型区的适宜性和限制性。研究表明：安徽省人居环境指数介于33.64～74.58之间,人居环境自然适宜性总体较好,绝大部分地区适宜人类居住,适宜性在空间上大体呈现南高北低的态势,与现有人口分布格局相反。一般适宜区面积最广,占安徽省总面积的46.08%;比较适宜区次之,占31.29%;高度适宜区占22.54%;临界适宜区面积最小,仅占0.08%。安徽省近61.16%的人口分布在一般适宜区,高度适宜区与比较适宜区人口所占比例不足40%,临界适宜区人口极为稀少。地形起伏度和水文指数是造成全省人居环境自然适宜性分异的主要因子,测评结果较为客观地反映了安徽省人居环境的自然本底。全省人口生存与发展的空间较大,人口流动与集聚的适宜范围较广。 关键词： 人居环境;自然适宜性;栅格;GIS;安徽省     

连续流双室微生物燃料电池处理工业废水

以实际中药废水作为阳极基质、实际含镉废水作为阴极电解液,构建了连续流双室微生物燃料电池(MFC),考察了其产电性能及对两种废水的处理效果。78 d的运行数据表明:系统可实现最大输出电压417mV、最大体积功率密度11.8 W/m3,最大体积功率密度运行条件下的库伦效率为18.5%;在阳极进水有机物浓度变化较大的情况下,实现了阳极对中药废水中有机物的有效去除,平均COD去除率为81.5%;阴极对含镉废水中Cd2+的去除率为79.4%～84.8%。这表明MFC同步处理中药废水及重金属废水具有一定的可行性。     

磷矿浆催化氧化湿法脱硝研究

采用液相催化氧化NO_x的方法,通过磷矿浆中过渡金属离子的催化作用,达到净化电厂烟气中NO的目的。考察了烟气含氧量、吸收温度、磷矿浆固液比及气体流量对磷矿浆湿法脱硝的影响。结果表明,试验最佳条件为NO进口质量浓度670 mg/m~3、磷矿浆吸收温度25℃、固液比500 g/L、流量0.3 L/min、含氧量20%;优化条件下的磷矿浆脱除效率最高可达88.9%。随着磷矿浆湿法催化氧化脱硝反应的进行,p H值不断下降,导致磷矿浆逐渐失效,需补入新鲜矿浆,维持吸收液的p H值以保证良好脱硝率。     

工业烟气氨法-络合法同时脱硫脱硝

在脱硫脱硝喷淋装置上采用氨法-络合法处理工业烟气。考察了吸收液pH、Fe(Ⅱ)EDTA浓度、初始烟气浓度、液气比对烟气同时脱硫脱硝效果的影响。实验结果表明:吸收液的酸碱度通过影响Fe(Ⅱ)与EDTA的络合形式进而影响NO去除率;SO_2去除率主要受吸收液pH和初始SO_2质量浓度的影响;当吸收液pH大于8、吸收液Fe(Ⅱ)EDTA浓度大于0.100 mol/L、初始SO_2质量浓度小于1 500 mg/m3、初始NO质量浓度为1 200 mg/m3时,SO_2去除率均在95%以上,NO去除率为54%;当液气比由1 L/m3增大至4 L/m3时,有效脱硫时间和有效脱硝时间分别增长了7 min和4 min。     

TiO2载体对Mn-Ce/TiO2催化剂脱硝活性的影响

以TiO₂为载体,选取过渡金属元素Mn为活性组分,稀土金属元素Ce为活性助剂,采用分步共混法制备了Mn-Ce/TiO₂催化剂（活性组分负载量16%）,系统研究了TiO₂载体的晶型和晶粒尺寸对催化剂脱硝活性的影响。实验结果表明：分别以锐钛矿型和金红石型TiO₂为载体制备的催化剂,其低温脱硝活性相差不大,活性组分均以无定型态高度分散于载体中,以金红石型TiO₂为载体制备的催化剂中部分TiO₂转变为锐钛矿型;以不同晶粒尺寸TiO₂载体制备的催化剂的低温脱硝活性相差较大,比表面积较大、晶粒尺寸较小的TiO₂载体制备的催化剂,其脱硝活性低于晶粒尺寸较大的TiO₂载体制备的催化剂。     

Preparation of biochar catalyst with saccharide and lignocellulose residues of corncob degradation for corncob hydrolysis into furfural

This paper presented a novel process for production of furfural by hydrothermal degradation of corncob over biochar catalyst, in which it was prepared with the recycling degradation solution and lignocellulosic solid residues. The biochar catalyst was papered by lignocellulose residues and concentrated saccharide solution, and then impregnated in 0.5 mol/L sulphuric acid at room temperature for 24 h assisted by the ultrasonic vibration. In the system of recycling, 8.8 % lignocellulose residues and 100 % concentrated saccharide solution from corncob hydrolysis have been recycled. Hydrolysis of corncob was carried out at 180 °C for duration of 170 min over the biochar catalyst. The experimental results have shown that the furfural yield of up to 37.75 % and overall corncob conversion rate of 62.00 % could be achieved under optimum operating conditions for the catalysts preparation and the corncob hydrolysis. It is believed that the acid density of 4.27 mmol/g of biochar catalyst makes the SO₃H groups cleave β-1,4 glycosidic linkages effectively and hydrolyze the cellulose and hemicellulose to water-soluble sugars, as well as to facilitate dehydration of xylose to give the product of furfural.