Recycling of an industrial sludge and marine clay as light-weight aggregates

The geographical limitations of Singapore, its restricted natural resources and voluminous municipal and industrial waste streams, make environmental management a major challenge for the island state. In an attempt to find ways to reduce importation of raw materials and the waste sent to landfill, light weight aggregates were produced from marine clay and a CaF(2)-rich semiconductor industry sludge. Aggregates were produced in a bench-scale rotary kiln with three clay/sludge loadings (90/10, 70/30 and 50/50%). All three mixtures showed good bloating behavior during firing and the ceramic pellets (1-1.5cm diameter) had densities well below that required for light-weight aggregates. In the initial tests, the pore sizes of the aggregates were in general too large resulting in high water absorption. Comparisons between the composition of the two waste products and the aggregates showed a significant loss of fluorine (40-60%) during processing; a problem which may require flue gas treatment. Leach testing showed that the formed aggregates would not pose a human or environmental hazard in terms of fluorine mobilization.     

Modelling the Distribution and Quality of Sand and Gravel Resources in 3D: a Case Study in the Thames Basin,UK

Three-dimensional (3D) models are often utilised to assess the presence of sand and gravel deposits. Expanding these models to provide a better indication of the suitability of the deposit as aggregate for use in construction would be advantageous. This, however, leads to statistical challenges. To be effective, models must be able to reflect the interdependencies between different criteria (e.g. depth to deposit, thickness of deposit, ratio of mineral to waste, proportion of ‘fines’) as well as the inherent uncertainty introduced because models are derived from a limited set of boreholes in a study region. Using legacy borehole data collected during a systematic survey of sand and gravel deposits in the UK, we have developed a 3D model for a 2400 km² region close to Reading, southern England. In developing the model, we have reassessed the borehole grading data to reflect modern extraction criteria and explored the most suitable statistical modelling technique. The additive log-ratio transform and the linear model of coregionalization have been applied, techniques that have been previously used to map soil texture classes in two dimensions, to assess the quality of sand and gravel deposits in the area. The application of these statistical techniques leads to a model which can be used to generate thousands of plausible realisations of the deposit which fully reflect the extent of model uncertainty. The approach offers potential to improve regional-scale mineral planning by providing an enhanced understanding of sand and gravel deposits and the extent to which they meet current extraction criteria.

     

Framing of Geoengineering Affects Support for Climate Change Mitigation

The growing recognition that climate change mitigation alone will be inadequate has led scientists and policymakers to discuss climate geoengineering. An experiment with a US sample found, contrary to previous research, that reading about geoengineering did not reduce conservatives’ skepticism about the existence of anthropogenic climate change. Moreover, depending on how it is framed, geoengineering can reduce support for mitigation among both conservatives and non-conservatives. When geoengineering is framed as a major solution, people worry less about climate change, leading to reduced mitigation support. When framed as disastrous, people perceived geoengineering as riskier, also leading to a decrease in mitigation support. A more moderate framing of geoengineering as a partial solution is less susceptible to moral hazard effects. Overall, results suggest that geoengineering will not lessen political polarization over anthropogenic climate change, and could undercut support for mitigation efforts. Instead, framing geoengineering as a small piece to solving a big puzzle seems to be the best strategy to weaken this potential moral hazard.     

Evaluation of photolysis and hydrolysis of pyraclostrobin in aqueous solutions and its degradation products in paddy water

This study evaluated the hydrolysis and photolysis kinetics of pyraclostrobin in an aqueous solution using ultra-high-performance liquid chromatography–photodiode array detection and identified the resulting metabolites of pyraclostrobin by hydrolysis and photolysis in paddy water using high-resolution mass spectrometry coupled with liquid chromatography. The effect of solution pH, metal ions and surfactants on the hydrolysis of pyraclostrobin was explored. The hydrolysis half-lives of pyraclostrobin were 23.1–115.5?days and were stable in buffer solution at pH 5.0. The degradation rate of pyraclostrobin in an aqueous solution under sunlight was slower than that under UV photolysis reaction. The half-lives of pyraclostrobin in a buffer solution at pH 5.0, 7.0, 9.0 and in paddy water were less than 12?h under the two light irradiation types. The metabolites of the two processes were identified and compared to further understand the mechanisms underlying hydrolysis and photolysis of pyraclostrobin in natural water. The extracted ions obtained from paddy water were automatically annotated by Compound Discoverer software with manual confirmation of their fragments. Two metabolites were detected and identified in the pyraclostrobin hydrolysis, whereas three metabolites were detected and identified in the photolysis in paddy water.     

Trace elements and microbiological parameters in farmed Nile tilapia with emphasis on muscle,water, sediment and feed

Fish may bioaccumulate contaminants from the aquatic environment and extend them to the food chain provoking risks to human health. This study evaluated the microbiological parameters of the pond´s water and trace elements concentrations in samples of water, sediment, feed and muscle of farmed Nile tilapia used for human consumption in southern Brazil. A total of 240 fish were collected from 12 tilapia farms. Sediment, tank water and dry ration used in the animals' diet were collected for analysis. Analysis were performed by Energy Dispersion X-ray Fluorescence (EDXRF), Inductively Coupled Plasma Mass Spectrometer (ICP-MS), Induced Coupled Plasma Optical Emission Spectrometer (ICP-OES), and Atomic Absorption Spectrometer (AAS-VGA). In addition, the microbiological analysis of the water was carried out. The concentrations of Se, I, Fe, Cu and Zn in fish muscle were higher than the recommended by the Brazilian legislation, considering the advised daily intake for adults. The arsenic element had concentrations above the limit stipulated by the present Brazilian legislation, observed in all samples of muscle, sediment and tank water highlighting a possible environmental and fish contamination by the toxic element. Moreover, the arsenic concentration in the water presented a positive correlation (ρ?=?0.33) with arsenic in the muscle, suggesting that tilapia is a good environmental bioindicator, once they properly reflect the levels of arsenic in the water. It is suggested to perform an arsenic speciation for quantification of the inorganic form and accurate assessment of the degree of toxicity in the muscle samples and risks it can bring to human health. Regarding the other potentially toxic elements (Hg, Pb and Cd), and microbiological analysis of water it was verified that the consumption of the fish in question does not raise risks, since the values are within a quality benchmark established by law. The concentration of total and fecal coliforms in pond´s water in the facilities was in agreement with the microbiological indexes required by the legislation of CONAMA class II. Western region presented the lowest concentrations of fecal coliforms when compared to the other regions. There was no significant difference in the microbiological counts of total heterotrophic bacteria, Vibrio spp. and Pseudomonas spp. among the regions.     

The Effect of Vaccinium vitis-idaea on Properties of Mountain-Meadow Soil under Alpine Lichen Heath

Russian Journal of Ecology - Abstract—The study of the effect of mycorrhiza symbiosis on the transformation of carbon and nitrogen compounds in soils is important in view of the necessity to...     

以膨润土为辅助添加剂固化/稳定化污泥的试验研究

针对传统以水泥固化污泥,带来的水泥用量大与固化体的浸出液pH过高等问题,提出了以膨润土为添加剂辅助水泥固化/稳定化污泥的思路.通过开展无侧限抗压强度试验、毒性浸出试验,测量掺入膨润土后污泥固化体的强度、重金属浸出率、浸出液COD及pH值,研究该固化/稳定化方法的效果.结果表明,膨润土的掺入极大地提高了固化体的抗压强度,将掺入量为0.4(相对污泥的质量比)的水泥一半用膨润土替代时,固化体的强度提高了6左右.体积安定性也能够满足要求.随膨润土掺入量增加,固化体中锌、铅的浸出率与浸出液的pH值呈现不断减小的趋势,锌与铅的浸出率分别由6.9%下降至0.25%,9.6%下降至5%,pH值由12.3下降至12.1.在强碱条件下及烘干或风干条件下,铜会随着有机物的分解而析出,从而增加铜的浸出率,而膨润土的加入能弥补水泥造成的强碱环境及风干或烘干过程对固化污泥中铜的稳定产生的不利影响.     

A quantitative water resource planning and management model for an industrial park level

This paper introduces an integrated water management model at the industrial park level. It suggests four approaches to water management: first, direct water reuse among users; second, water reuse among users by blending with freshwater; third, water reuse between users and a wastewater treatment plant; and fourth, groundwater recharge by reclaimed wastewater or other feasible applications in order to optimize the overall water efficiency. The model results in a comprehensive management methodology for optimizing water resources within an industrial park, seeking potential water reuse among industries, and incorporating the size and cost of reclaimed wastewater delivery systems. A case study is employed to test the model’s feasibility. An economic analysis of the optimized water use network is also carried out, showing the potential water and cost savings.     

Aquaculture practices and potential human health risks: current knowledge and future priorities

Annual global aquaculture production has more than tripled within the past 15 years, and by 2015, aquaculture is predicted to account for 39% of total global seafood production by weight. Given that lack of adequate nutrition is a leading contributor to the global burden of disease, increased food production through aquaculture is a seemingly welcome sign. However, as production surges, aquaculture facilities increasingly rely on the heavy input of formulated feeds, antibiotics, antifungals, and agrochemicals. This review summarizes our current knowledge concerning major chemical, biological and emerging agents that are employed in modern aquaculture facilities and their potential impacts on public health. Findings from this review indicate that current aquaculture practices can lead to elevated levels of antibiotic residues, antibiotic-resistant bacteria, persistent organic pollutants, metals, parasites, and viruses in aquacultured finfish and shellfish. Specific populations at risk of exposure to these contaminants include individuals working in aquaculture facilities, populations living around these facilities, and consumers of aquacultured food products. Additional research is necessary not only to fully understand the human health risks associated with aquacultured fish versus wild-caught fish but also to develop appropriate interventions that could reduce or prevent these risks. In order to adequately understand, address and prevent these impacts at local, national and global scales, researchers, policy makers, governments, and aquaculture industries must collaborate and cooperate in exchanging critical information and developing targeted policies that are practical, effective and enforceable.     

The Use of Natural Taraxacum officinale Wigg. Populations for Assessing the State of Technogenically Disturbed Areas

Russian Journal of Ecology -