微生物-光-电化学耦合技术降解污染物和回收能源的研究进展

微生物电化学技术能同时实现污染物去除和能量回收,但存在污染物去除种类有限及产能效率低的局限,近几年将可再生的太阳能引入微生物电化学技术的微生物-光-电化学耦合技术应运而生。本文简要介绍了微生物-光-电化学耦合技术的发展背景和研究现状,对该技术现有的耦合形式进行分类,并对各种形式的耦合机理进行详细的阐释,最后对其未来的发展进行了展望。     

连续流双室微生物燃料电池处理工业废水

以实际中药废水作为阳极基质、实际含镉废水作为阴极电解液,构建了连续流双室微生物燃料电池(MFC),考察了其产电性能及对两种废水的处理效果。78 d的运行数据表明:系统可实现最大输出电压417mV、最大体积功率密度11.8 W/m3,最大体积功率密度运行条件下的库伦效率为18.5%;在阳极进水有机物浓度变化较大的情况下,实现了阳极对中药废水中有机物的有效去除,平均COD去除率为81.5%;阴极对含镉废水中Cd2+的去除率为79.4%～84.8%。这表明MFC同步处理中药废水及重金属废水具有一定的可行性。     

A real-time simulating non-isothermal mathematical model for the passive feed direct methanol fuel cell

In order to understand the complex transport phenomena in a passive direct methanol fuel cell (DMFC), a theoretical model is essential. The analytical model provides a computationally efficient framework with a clear physical meaning. For this, a non-isothermal, analytical model for the passive DMFC has been developed in this study. The model considers the coupled heat and mass transport along with electrochemical reactions. The model is successfully validated with the experimental data. The model accurately describes the various species transport phenomena including methanol crossover and water crossover, heat transport phenomena, and efficiencies related to the passive DMFC. It suggests that the maximum real efficiency can be achieved by running the cell at low methanol feed concentration and moderate current density. The model also accurately predicts the effect of various operating and geometrical parameters on the cell performance such as methanol feed concentration, surrounding temperature, and polymer electrolyte membrane thickness. The model predictions are in accordance with the findings of the other researchers. The model is rapidly implementable and can be used in real-time simulation and control of the passive DMFC. This comprehensive model can be used for diagnostic purpose as well.     

城市生活垃圾机械生物处理效果

采用机械生物处理工艺研究了淋洗水解、脱水与好氧生物干燥对城市生活垃圾的处理效果.结果表明:在淋洗水解及压榨脱水机械生物处理阶段,控制淋洗液与生活垃圾重量比2∶1,停留时间1.2 ～1.4 d条件下,生活垃圾可以减量49.7％.而过程中产生的淋滤液COD为32 939 mg/L、pH为5.1、COD∶N∶P=261∶5∶3.6,可以进行厌氧消化处理或作为碳源进行资源化利用.在好氧生物干燥阶段,通风量采用0.08 m3/min,2～3d堆体温度可升至73℃,7d左右即可产出LCV高达15 000 kJ/kg左右的高品位垃圾衍生燃料(RDF),其产率为38.2％,氯元素含量低于0.5％,重金属含量较低,满足燃料要求.     

MFC强化同步短程硝化反硝化工艺的启动

微生物燃料电池(MFC)可在阴极实现反硝化、短程反硝化和同步硝化反硝化并产生电能,但在MFC阴极实现同步短程硝化反硝化的研究尚未见到报道。为了探讨MFC阴极同步短程硝化反硝化工艺的性能,将双室曝气阴极MFC与A/O脱氮工艺结合处理人工模拟低碳氮比废水。通过静置运行15 d使得MFC阴极室亚硝态氮得以积累,氨氧化菌得以富集。随即改为连续运行后第21天成功启动同步短程硝化反硝化MFC;阴极出水氨氮浓度为0.3 mg/L,亚硝态氮浓度为15.9 mg/L,硝态氮浓度为0.6 mg/L,亚硝化率达到95%以上,阴极电极自养反硝化去除率达到50%以上,COD去除率达到85%以上。结果表明,将MFC与同步短程硝化反硝化工艺结合,通过阴极室中氧气得电子获得高p H,可以强化同步短程硝化反硝化工艺,完成生物脱氮的同时回收电能,并具有减少外加碱度的优势。     

泥炭保护紫花苜蓿根系对柴油污染土壤修复的研究

采用盆栽试验,观察了泥炭保护根系移栽和直播2种栽培方式处理的紫花苜蓿在柴油污染土壤中的生长情况及其对土壤中柴油污染物的去除情况,探讨了利用泥炭保护根系措施清除土壤柴油污染物的可行性.结果表明,泥炭保护根系处理有利于紫花营蓿根系形态发育,能促进根系细菌和真菌的繁殖,并显著提高根区土壤柴油降解率.     

汽油机冷启动时燃油蒸发多参数影响研究

采用CFD商用软件STAR-CD对汽油机冷启动过程中燃油蒸发进行三维数值模拟,研究了油滴初直径、油滴初速度、进气温度、燃油温度、喷射定时和转速对燃油蒸发率的影响规律.计算结果表明,进气温度、燃油温度和转速对燃油蒸发有重要影响.进气门开时,在进气温度为-7℃和90℃时,蒸发率分别为5.7%和25.0%;相应地,在燃油温度为0℃和60℃时,燃油蒸发率分别为5.7%和22.0%.油滴初直径和喷射定时对燃油蒸发率有一定影响,油滴初速度对燃油蒸发率影响很小.     

燃料乙醇应用对环境的影响

燃料乙醇作为可再生的替代能源被越来越广泛地利用.从对空气的影响、对土壤和地下水的潜在影响、能源的有效性和能源的可持续性4个方面阐述了燃料乙醇使用对环境的影响效应,既说明了其显著的优势,又提出了存在的问题及相关建议,旨在更充分地发挥燃料乙醇的能源价值.     

Pyrolysis of rice husk and sawdust for liquid fuel

The paper is focused on studying how to convert rice husk and sawdust into liquid fuel. Rice husk, sawdust and their mixture were pyrolyzed at the temperature between 420℃ and 540℃, and the main product of liquid fuel was obtained. The experimental result showed that the yield of liquid fuel heavily depended on the kind of feedstock and pyrolysis temperature. In the experiments, the maximum liquid yields for rice husk, sawdust and their mixture were 56% at 465 ℃, 61% at 490℃ and 60% at 475℃ respectively. Analysis with GC-MS and other apparatus indicated that the liquid fuel is a complicated organic compound with low caloric value and can be directly used as fuel oil without any up-grading. As a crude oil, the liquid fuel can be refined to be vehicle oil.     

Characteristics of stable biodiesel emulsion fuel with the aid of lipophilic surfactant,polyglycerol polyricinoleate (PGPR)

ABSTRACT

Biodiesel emulsion fuel is reported as one of the most feasible options capable of generating lower NOx emission than that from fossil fuels. However, oil and water in the emulsion fuel are easily separated and unstable. The aim of the present study is to consider the production and stability of biodiesel emulsion fuel by using tetraglycerin ester (CR-310), i.e., one of lipophilic surfactant, polyglycerol polyricinoleate (PGPR) and biodiesel, i.e., Waste cooking Oil Methyl Ester (WOME) produced based on waste cooking oil. The corresponding heat rate, water content, and viscosity are measured. Emphasis is placed on the effects of water content and surfactant on biodiesel emulsions. It is found that: (i) stable emulsion fuel is obtained by adding at least 2.0% of CR-310 and is maintained over 1 month, (ii) there is no effect of water content on stable emulsion fuel if CR-310 is used over 2.0%, and (iii) the viscosity of emulsion fuels is higher than that of the biodiesel fuel and is gradually increased with an increase in the water content.