Challenges for modelling and integrating environmental performances in concept design: the case of an automotive component lightweighting

The objective of this paper is to discuss the main barriers for modelling and integrating the environmental performances in the automotive concept design. Incorporating environmental assessment in the early design phase of a vehicle component is known as an important challenge that car makers need to face in order to develop more sustainable design solutions; in this regard, the Life Cycle Assessment is the most widespread methodology for the environmental assessment and comparison of alternatives. The present work illustrates the combination of such methodology with the traditional design procedure at two different levels of the component design phase, material choice and concept design. In particular, the potential benefits originated by a lightweight solution for the automotive component Throttle Body are evaluated by considering environmental and technical implications at the same level. The case study shows that a multi-disciplinary approach for design effectively allows the integration of the environmental issue in the company’s established procedures. However, interpretation of results is still a challenging aspect due to the inevitable contradicting elements which should not discourage to develop comprehensive sustainability assessment within the early design stage.     

Bioaccessibility of polychlorinated biphenyls in workplace dust and its implication for risk assessment

Human exposure to bioaccessible PCBs via indoor dust is limited around the world. In the present study, the workplace dust sample from commercial office, hospital, secondary school, shopping mall, electronic factory and manufacturing plant were collected from Hong Kong for PCBs analyses. Total PCBs concentrations ranged from 46.8 to 249 ng g⁻¹, with a median of 107 ng g⁻¹. Manufacturing plant showed the highest concentration among all of sampling sites. PCB 77 was found as the dominant congeners. The bioaccessibility of PCBs in small intestinal juice ranging from 8.3% to 26.0% was significantly higher than that in gastric condition, ranging from 4.8% to 12.4%. In addition, significant negative correlations (p < 0.05) were observed between K_OW and bioaccessibility for all workplace dust samples. Risk assessment indicated that the averaged daily dose of dioxin-like PCBs via non-dietary intake of workplace dust, considering the bioaccessibility of PCBs, were much lower than the TDI of dioxins (2.3 pg WHO-TEQ kg bw⁻¹ d⁻¹) established by Joint FAO/WHO Expert Committee on Food Additives.     

Implications of geographic variability on Comparative Toxicity Potentials of Cu, Ni and Zn in freshwaters of Canadian ecoregions

Current methods of estimating potential environmental impacts of metals in hazard and Life Cycle Impact Assessment (LCIA) do not consider differences in chemistry and landscape properties between geographic sites. Here, we developed and applied a model for regional aquatic impact characterization of metals using an updated method for estimating environmental fate factor (FF), bioavailability factor (BF) and aquatic ecotoxicity factor (EF). We applied the model to analyze differences in Comparative Toxicity Potentials (CTPs) of Cu, Ni and Zn for 24 Canadian ecoregions. The combined impacts of regional variability in ambient chemistry (in particular DOC, pH and hardness) and landscape properties (water residence time) can change the CTPs of these metals for freshwater by up to three orders of magnitude and change the relative ranking of metal hazard between ecoregions. Variation among Canadian freshwater chemistries and landscape characteristics influence the FFs within two orders of magnitude, BFs within two orders of magnitude for Ni and Zn and four orders of magnitude for Cu, and EFs within one order of magnitude. Sensitivity of metal FFs to environmental parameters alone spans three orders of magnitude when a constant water chemistry was used for all ecoregions. These results indicate that application of regionalised metal CTPs can have a significant influence in the analysis of ecotoxicological impacts in the life cycle assessment of products and processes.     

燃煤电厂大气污染物排放考核时间间隔的建议

新的《火电厂大气污染物排放标准》和新《环境保护法》实施后,燃煤火电企业的依法治企自觉性不断提高,但由于不同的环保管理文件对超标处罚依据和处罚手段不同,造成政府对企业处罚的自由裁量权加大,对企业造成一定的压力与困惑。结合企业实际运行情况对燃煤电厂大气污染物排放考核时间间隔提出建议。     

The role of toxicology in the evaluation of new agrochemicals

Abstract

The use of agrochemicals like crop protecting agents, veterinary disinfectants, and wood preservatives may result in (un)intentional exposure of the environment, animals and man. This paper deals with current testing strategies to assess the potential health risks for humans exposed to these chemicals during production or application or via consumption of foods containing pesticide residues.

Principles and procedures for safety assessment of pesticide residues in food as developed by WHO/FAO are described. Different types of toxicity studies in mammalian test animal species are discussed and a strategy is outlined in order to characterize the toxicity profile of a compound and the relationship between applied doses and adverse effects. Safety testing of agrochemicals should be carried out in relation to its intended use, and in particular attention will be paid to toxicity testing of residues of pesticides in food. Extrapolation of results from animal studies to humans and the use of safety factors is discussed.

Besides the use of animal protocol studies for safety testing of agrochemicals, the potential use of in‐vitro models derived from organs and tissues of animals is discussed. Data on the in‐vitro metabolism of thiabendazole, aldicarb and alachlor are discussed in order to demonstrate that such data may complement or partly substitute whole animal experimentation.

Principles and procedures for safety testing of residues of agrochemicals in food as applied during the last three decades, constitute a ‘safety‐first’ approach, providing sufficient safety margins for the consumer of foods which may contain low levels of residues of agrochemicals.     

Integrated assessment: Missing link in the acid rain debate?

The United States is finding it difficult to develop a coherent policy on acid rain. Despite more than a decade of scientific research and policy initiatives, no clear course of action has been identified. This article argues that what is missing is an integrated assessment of the scientific knowledge that will guide the political process. The role of the integrated assessment is described, and a conceptual framework presented that would accomplish the desired goal. Currently available acid rain assessment models are compared against this framework and found to be less than satisfactory. The article concludes by stressing the opportunity now available to the National Acid Precipitation Assessment Program to perform such an assessment and break the logjam.     

建设项目环境影响的医学评价方法研究

作者在对中国我人民解放军第４７医院病建项目所产生的大气环境影响进行了医学秤价和影响，并在预测的基础上，建立了完整的环境医学影响廉政价方法，由于该评价方法完全尊循了国内现行大气环境影响评价的基本要求和程序，因此，它在今后的环境影响医学评价中净有广泛的应用。     

试论沙漠化灾害危险度评价因子体系

本文通过对国内外沙漠化灾害危险度评价因子体系研究现状的分析，从我国实际出发，根据沙漠化灾害危险度的基本内容，首次提出了沙漠化灾害危险度评价因子体系，并给出了相应因子的分级标准。     

On the usefulness of life cycle assessment of packaging

In reaction to a paper inEnvironmental Management in which the sense and sensibility of environmental assessments of packaging were questioned, it is argued that these types of assessments may be very useful, provided the relevant types of questions are posed. These boundary conditions are discussed, along with an overview of more recent methodological developments with respect to environmental assessment of products.