On the hydro-dispersive equivalence between multi-layered mineral barriers

In the context of municipal solid waste and hazardous waste disposal, the notion of "equivalence" between different barrier designs appears in regulatory documents from several industrialized countries. While in the past, equivalence has been thought of mainly in terms of contaminant travel times, in recent years it has been defined more in terms of the magnitude of a disposal site's potential impact on groundwater resources. This paper presents some original analytical solutions to the problem of contaminant migration through a multi-layered mineral barrier. The solutions account for the two major mechanisms of subsurface contaminant migration, namely, advection and diffusion-dispersion. An example application using the proposed solutions and a numerical model illustrates how one multi-layered mineral barrier can be considered superior to another from a strictly hydro-dispersive viewpoint. The influence of partial saturation of the mineral barrier is investigated using a numerical solution to the Richards equation for unsaturated flow. It is emphasized that conclusions relative to the superiority of one multi-layered barrier, with respect to another, should not only consider hydro-dispersive aspects, but also other processes such as the mechanical and chemical evolutions of the different barrier components. Although such phenomena are poorly addressed by existing models, failure to take them into account, at least in a qualitative fashion, may lead to unconservative conclusions with respect to barrier equivalence.     

Enhanced sludge solubilization by microbubble ozonation

A microbubble ozonation process for enhancing sludge solubilization was proposed and its performance was evaluated in comparison to a conventional ozone bubble contactor. Microbubbles are defined as bubbles with diameters less than several tens of micrometers. Previous studies have demonstrated that microbubbles could accelerate the formation of hydroxyl radicals and hence improve the ozonation of dyestuff wastewater. The results of this study showed that microbubble ozonation was effective in increasing ozone utilization and improving sludge solubilization. For a contact time of 80 min, an ozone utilization efficiency of more than 99% was obtained using the microbubble system, while it gradually decreased from 94% to 72% for the bubble contactor. The rate of microbial inactivation was obviously faster in the microbubble system. At an ozone dose of 0.02 g O₃ g⁻¹ TSS, about 80% of microorganisms were inactivated in the microbubble system, compared with about 50% inactivation for the bubble contactor. Compared to the bubble contactor, more than two times of COD and total nitrogen, and eight times of total phosphorus content were released from the sludge into the supernatant by using the microbubble system at the same ozone dosage. The application of microbubble technology in ozonation processes may provide an effective and low cost approach for sludge reduction.     

社会资本对山区居民山洪灾害应急避险能力的影响研究*

为研究社会资本对山区居民应急避险能力的影响,在广泛调研的基础上采用结构方程模型分析社会资本与山区居民应急避险能力各要素之间的作用关系。结果表明:个人网络对避险知识和避险意识有显著的正向影响,对避险行为影响不显著;信任与避险知识和避险意识呈显著的正向影响,而与避险行为呈反向影响,但信任可以通过避险知识和避险意识间接正向影响避险行为;互惠对避险知识影响不显著,但互惠与避险意识和避险行为存在显著的正向关系;避险知识和避险意识对避险行为呈显著正向影响,其中避险意识对避险行为影响更为显著。因此可以通过增加山区居民社会资本的方式提高山区居民山洪灾害应急避险能力。     

Enhanced nitrogen removal upon the addition of volatile fatty acids from activated sludge by combining calcium peroxide and low-thermal pretreatments

This study investigated a combined low-thermal and CaO₂ pretreatment to enhance the volatile fatty acid (VFA) production from waste activated sludge (WAS). The fermentative product was added to a sequencing batch reactor (SBR) as an external carbon source to enhance nitrogen removal. The results showed that the combined pretreatment improved WAS solubilization, releasing more biodegradable substrates, such as proteins and polysaccharides, from TB-EPS to LB-EPS and S-EPS. The maximum VFA production of 3529 ± 188 mg COD/L was obtained in the combined pretreatment (0.2 g CaO₂/g VS + 70 °C for 60 min), which was 2.1 and 1.4-fold of that obtained from the sole low-thermal pretreatment and the control test, respectively. Consequently, when the fermentative liquid was added as an external denitrification carbon source, the effluent total nitrogen decreased to Class A of the discharge standard for pollutants in rural wastewater treatment plants in most areas of China.     

关于电子废物资源循环利用的思考

论述了我国电子废物的产生及污染现状,分析了日本、欧美等发达国家促进电子废物循环利用的对策,提出了我国电子废物循环利用的建议。     

医疗废物焚烧中二恶英的产生及控制

医疗废物的安全处置一直被世界各国所重视,我国自SARS灾难后,强化了医疗废物的治理力度。本文针对目前主要采用焚烧法处置医疗废物过程中二恶英的生成途径进行了论述,并结合二恶英的分子结构、毒性及危害提出了控制对策与建议。     

沈阳市苏家屯区危险废物管理、处置现状与对策

对沈阳市苏家屯区危险废物现状进行了调查,分析了危险废物的来源、产生量、特征及存在的主要问题。在此基础上,提出对危险废物管理处置对策,包括开展危险废物申报登记;加强苏家屯区危险废物监督管理;源头控制危险废物污染产生和建设危险废物集中处置场等。     

危险废物城市环境风险评估方法及案例研究

在不同经济社会发展情况下,危险废物的风险源危险性和风险受体脆弱性存在很大差异。因此,城市对危险废物采取的风险防控和应急措施应该因城市而异。然而,目前我国大部分城市对危险废物的管理仍然是全过程从严管理,并未建立基于风险评估的环境管理体系。本研究以城市为边界,从危险废物的风险源危险性、风险受体脆弱性和风险防控与应急能力3个维度构建评估指标体系,然后在层次分析法的基础上,采用等比例分配法对指标进行赋权,并运用线性加权法合成经过正向化处理的指标评分值,从而得出危险废物城市环境风险评估结果。通过计算3个维度评分值的耦合度,可以确定风险防控与应急能力维度与风险源危险性维度和风险受体脆弱性维度的匹配程度。运用该方法对深圳市开展案例研究,结果表明,深圳市在“无废城市”建设试点期间,主要通过提升风险防控与应急能力,将危险废物城市环境风险值降低了20.7%;并且风险防控与应急能力维度与风险源危险性维度和风险受体脆弱性维度的匹配度较高,属于高风险高能力城市。因此,建议深圳市在下一步工作中,继续完善涉危险废物项目环境准入审查,严格评估危险废物再利用安全,不断加强信息化手段在环境监管中的应用,避免涉危险废物突发环境事件的发生,全面降低危险废物对城市造成的环境风险。     

An international survey of decabromodiphenyl ethane (deBDethane) and decabromodiphenyl ether (decaBDE) in sewage sludge samples

Decabromodiphenyl ethane (deBDethane) is an additive flame retardant marketed as a replacement for decabromodiphenyl ether (decaBDE). The structures of the two chemicals are similar, and hence deBDethane may also become an environmental contaminant of concern. Environmental data on deBDethane are scarce. Since sewage sludge is an early indicator of leakage of these chemicals into the environment, an international survey of deBDethane and decaBDE levels in sludge was conducted. Samples were collected from 42 WWTPs in 12 different countries and analyzed with GC/LRMS. DeBDethane was present in sludge from all countries and may therefore be a worldwide concern. The levels of deBDethane in sludge samples from the Ruhr area of Germany were the highest so far reported in the literature (216 ng g⁻¹ d.wt.). The [deBDethane]/[decaBDE] quotient for the whole data set ranged from 0.0018 to 0.83. High ratios were found in and around Germany where deBDethane imports are known to have been high and substitution of decaBDE with deBDethane is likely to have occurred. Low ratios were found in the USA and the UK, countries that have traditionally been large users of decaBDE. An estimate of the flux of deBDEthane from the technosphere via WWTPs to the environment within the European Union gave 1.7 ± 0.34 mg annually per person. The corresponding value for decaBDE was 41 ± 22 mg annually per person.     

Acceleration of floc-water separation and floc reduction with magnetic nanoparticles during demulsification of complex waste cutting emulsions

Waste cutting emulsions are difficult to treat efficiently owing to their complex composition and stable emulsified structure.As an important treatment method for emulsions,chemical demulsification is faced with challenges such as low flocs-water separation rates and high sludge production.Hence,in this study,Fe₃O₄ magnetic nanoparticles(MNPs)were used to enhance chemical demulsification performance for treating waste cutting emulsions under a magnetic field.The addition of...