液晶显示器液晶处理与铟回收技术

在实验室条件下,对液晶显示器回收的各个重要环节作了初步的探索,提出了一整套回收工艺.其中包括利用丙酮常温浸取去除偏光片、分离玻璃基板、溶解液晶,还包括利用硫酸溶液和二氧化锰联合浸取玻璃基板,铟的浸取率达89%.得到的铟的酸液经过萃取、置换和电解,可以得到铟的产品,为液晶显示器的资源化和无害化提供实验数据和技术支持.     

玉兰油细胞的发育及其与器官结构发育的关系

利用石蜡切片法及半薄切片法对玉兰茎、叶、花和种子中油细胞的发育进行了研究,结果表明：在所研究的各器官中油细胞以相同的方式发生。油细胞原始细胞因其细胞质染色较深、细胞核大明显及液泡化程度低而易与周围组织细胞分辨,以后,原始细胞逐渐液泡化,最终形成一个中央大液泡,其细胞质及细胞核呈一薄层,当油细胞成熟时,其细胞质和细胞核解体,而大液泡充满整个油细胞腔,成为储油的囊,在一些油细胞中,可观察到怀形构造,但     

纤维藻(Ankistrodesmus sp.)对镍的吸附、吸收作用及镍对其细胞形态结构影响

纤维藻（Ankistrodesmussp.）对镍毒作用反应敏感,对Ni     

利用下水管网系统净化城市污水的中试研究

采用充纯氧及固定化细胞技术在２７５．５ｍ市政下水管网系统中进行了日处理１５００ｍ＾３污水的中试。对单纯充氧、充氧加固定化细胞二种工艺及不同 氧量刊物了比较研究。结果表明,在加固定化细胞条件下,充纯氧（Ｖ（Ｏ２）：Ｖ（Ｈ２Ｏ）＝０．０７８：１）可使流过此段管道的污水的污染物去除６５％以上,基本达到国家污水综合排放二级标准。     

分子吸附器在光学相机污染控制中的应用研究

分子吸附器作为一种新型的在轨污染控制手段,具有使用方便、重量轻、无功耗和成本低等特点,可以为航天器光学相机提供在轨污染控制。从在轨分子污染物和分子吸附器特点两方面进行分析,描述了光学相机在轨污染物来源及特点,分析了污染物成分及对光学相机的危害,阐述了分子吸附器(包括吸附剂和基底)的组成及吸附特点。结合相机结构,提出了分子吸附器在光学相机污染控制中的应用方案,并明确了今后的研究方向。     

Identifying and modeling key trade-offs between hydrogen fuel cell and electric vehicles

Through a sensitivity analysis, the trade-off between vehicle range and CO₂ emissions is investigated as a function of electric emissions coefficient. Various powertrains were analysed for use in a small crossover sport utility vehicle. Gasoline, gasoline electric hybrid, diesel, fuel cell and battery electric vehicles (BEVs) were considered. Using various upstream fuel pathways and a model for vehicle performance, emissions and energy use were estimated. The hydrogen fuel cell vehicle was found preferable to BEVs under conditions of high CO₂ emissions per kW-hr and a high vehicle range requirement. The BEV was preferable for all other conditions.     

微生物-光-电化学耦合技术降解污染物和回收能源的研究进展

微生物电化学技术能同时实现污染物去除和能量回收,但存在污染物去除种类有限及产能效率低的局限,近几年将可再生的太阳能引入微生物电化学技术的微生物-光-电化学耦合技术应运而生。本文简要介绍了微生物-光-电化学耦合技术的发展背景和研究现状,对该技术现有的耦合形式进行分类,并对各种形式的耦合机理进行详细的阐释,最后对其未来的发展进行了展望。     

连续流双室微生物燃料电池处理工业废水

以实际中药废水作为阳极基质、实际含镉废水作为阴极电解液,构建了连续流双室微生物燃料电池(MFC),考察了其产电性能及对两种废水的处理效果。78 d的运行数据表明:系统可实现最大输出电压417mV、最大体积功率密度11.8 W/m3,最大体积功率密度运行条件下的库伦效率为18.5%;在阳极进水有机物浓度变化较大的情况下,实现了阳极对中药废水中有机物的有效去除,平均COD去除率为81.5%;阴极对含镉废水中Cd2+的去除率为79.4%～84.8%。这表明MFC同步处理中药废水及重金属废水具有一定的可行性。     

A real-time simulating non-isothermal mathematical model for the passive feed direct methanol fuel cell

In order to understand the complex transport phenomena in a passive direct methanol fuel cell (DMFC), a theoretical model is essential. The analytical model provides a computationally efficient framework with a clear physical meaning. For this, a non-isothermal, analytical model for the passive DMFC has been developed in this study. The model considers the coupled heat and mass transport along with electrochemical reactions. The model is successfully validated with the experimental data. The model accurately describes the various species transport phenomena including methanol crossover and water crossover, heat transport phenomena, and efficiencies related to the passive DMFC. It suggests that the maximum real efficiency can be achieved by running the cell at low methanol feed concentration and moderate current density. The model also accurately predicts the effect of various operating and geometrical parameters on the cell performance such as methanol feed concentration, surrounding temperature, and polymer electrolyte membrane thickness. The model predictions are in accordance with the findings of the other researchers. The model is rapidly implementable and can be used in real-time simulation and control of the passive DMFC. This comprehensive model can be used for diagnostic purpose as well.     

分子筛吸附法脱除废水中的聚丙烯酰胺

聚丙烯酰胺(PAM)用于油田驱油产生大量难处理的含聚废水。以分子筛为吸附剂处理含聚废水,研究分子筛类型(Y、Beta和ZSM-5,H型和Na型)和物化性质对其吸附PAM性能的影响,并测定吸附等温线。结果表明,吸附性能顺序为BetaYZSM-5,H型优于Na型。H-Beta对PAM的吸附来自分子筛中阳离子与PAM中阴离子的静电作用,Si—O和Al—OH与PAM中酰胺基的氢键作用。H-Beta开放的通道结构,较高的介孔比例和表面积,较强的酸性和良好的酸中心可接近性使其具有优异的吸附性能。Si O2/Al2O3=26的H-Beta对浓度为200 mg/L的PAM溶液,PAM脱除率可达95.2%。在低PAM平衡浓度时,PAM在H-Beta上的吸附符合Langmuir单层吸附特征,饱和吸附量达70.2 mg/g,在高浓度区域则由于PAM疏水缔合作用加强呈现多层吸附。