Robustness testing of a free-fall triboelectric separation process for plastic waste recovery

Among the separation techniques used in industries, the triboelectric separation of insulating particles using a rotary tube is an effective way employed in the waste recovery of plastic and mineral products. This process, also called free-fall triboelectric separation, is widely used for the sorting of granular mixtures resulting from industrial plastic wastes. Given that the robustness of such a separation process is an important issue, a standard procedure is used for determining the set point and for minimising the process sensitivity of sorting mixed particles of different polymers to changes in the values of some critical factors. The aim of this paper was to analyse the efficiency of the triboelectric separation process of polymers with respect to any slight variation in the values of the most significant factors. Experiments with a sample of high-density polyethylene and polyvinyl chloride plastic granules were carried out on a laboratory experimental bench. Several one-factor-at-a-time experiments, followed by two factorial designs (one composite and the other fractional), were performed based on the following experimental procedure: (1) determination of the variation limits of the input variables; (2) identification of the set point and (3) robustness testing of the process, i.e. testing whether the performance of the system remains high even when the factors vary slightly around the set point.     

300MW燃煤锅炉机组超细颗粒聚并器的实验研究

为了解决燃煤锅炉烟气中超细颗粒难以脱除的问题,基于流体动力学原理设计了一种超细颗粒聚并器,并在300 MW燃煤锅炉机组电除尘器的前置烟道中进行了实验研究。结果表明,聚并器内部存在超细颗粒之间以及超细颗粒与大颗粒之间的相互聚集行为,从而使超细颗粒数量显著减少。例如,对于粒径在2.65和10.48μm以下的颗粒,其体积比例在聚并器出口分别减少了56.7%和62.3%,在电除尘器出口的粉尘浓度减少了26.34 mg/Nm3,这表明,基于流体动力学原理的聚并器对超细颗粒的聚并作用明显,具有良好的应用前景。     

燃煤电厂大气污染物排放考核时间间隔的建议

新的《火电厂大气污染物排放标准》和新《环境保护法》实施后,燃煤火电企业的依法治企自觉性不断提高,但由于不同的环保管理文件对超标处罚依据和处罚手段不同,造成政府对企业处罚的自由裁量权加大,对企业造成一定的压力与困惑。结合企业实际运行情况对燃煤电厂大气污染物排放考核时间间隔提出建议。     

2A12铝合金在模拟溶液中的周浸腐蚀行为

采用干湿周浸实验、失重法和电化学阻抗谱研究了2A12铝合金在0.6mol/L NaCl和0.6mol/L NaCl 0.02mol/L NaHSO3两种溶液中的腐蚀行为与规律, 利用扫描电镜(SEM)、能谱(EDX)和红外光谱(FTIR) 观察分析腐蚀产物表面形貌、结构和组成,测试了材料的力学性能.研究表明,随腐蚀时间的延长,腐蚀产物不断增多,失重增加,力学性能下降,阻抗模值逐渐减小;腐蚀产物形貌以团状和块状为主,在0.6mol/L NaCl溶液中腐蚀产物主要为铝的氯化物和氧化铝,在0.6mol/L NaCl 0.02mol/L NaHSO3溶液中腐蚀产物主要为氧化铝、铝的硫酸盐水合物和铝的氯化物;由于NaCl和NaHSO3共同作用,2A12合金在0.6mol/L NaCl 0.02mol/L NaHSO3溶液中腐蚀电流密度高,阻抗模值相对较小,腐蚀速率较高,腐蚀后失重大,力学性能下降幅度较大,腐蚀更严重.     

SO2在碳钢初期大气腐蚀中的作用

通过自建的模拟大气腐蚀系统,借助金相显微镜、扫描电镜(SEM/EDX)、X-射线衍射(XRD)和x-射线光电子能谱(XPS),研究了SO2对碳钢初期大气腐蚀行为的影响,并进一步用原子力显微镜从更微观的角度观察了在SO2环境中初期阶段腐蚀形貌变化.研究结果表明:在SO2污染大气环境中,随SO2浓度的升高碳钢腐蚀加快.在体积分数为5×10(-6)SO2的大气环境中,碳钢和耐候钢表面腐蚀主要以条状物生长,随着SO2浓度的升高,腐蚀产物的形貌发生改变,在体积分数为5×10(-5)SO2的大气环境中,条状锈和胞状锈同时生长.在锈层中S元素以FeSO4·4H2O的形式存在,腐蚀产物中还有γ-FeOOH.SO2在初期阶段加速了碳钢的腐蚀,降低了碳钢的耐蚀性.     

火电厂烟气排放对广州大气环境的影响

广州市是酸雨、可吸入颗粒物污染严重的地区之一,这与其能源结构以煤为主有关.广州发电厂以燃煤为主,其周围大气采样数据分析显示燃煤电厂可对周围大气环境造成较大影响,是酸雨前体物、可吸入颗粒物的主要排放源.酸雨破坏了生态环境,也阻碍了经济的发展;燃煤排放的烟尘细颗粒物属于可吸入颗粒物,其上附着的As、Cr等微量元素多为致癌物质和致基因毒性诱变物质,对周围居民的健康危害极大.最后, 对当前的环境保护工作及存在的问题进行了阐述.     

Impacts of Upstream Building Width and Upwind Building Arrangements on Airflow and Pollutant Dispersion in a Street Canyon

A two-dimensional numerical model for evaluating the wind flow and pollutant dispersion within a street canyon was first developed using the FLUENT code, which was then validated against a wind tunnel experiment. Then, the effects of the upstream building width and upwind building arrangement on the airflow and pollutant dispersion inside an isolated street canyon were investigated numerically. The numerical results revealed that: (1) the in-canyon vortex center shifts downwards as the upstream building width increases; (2) the recirculation zone covers the entire upstream building roof for the cases when W/H = 0.5, 1.0, 1.5, and 2.0 (W is the upstream building width and H is the building height), whereas the flow reattaches the upstream building roof for the cases when W/H = 2.5 and 3.0; (3) when the upstream building width is shorter than the critical width W_C (= 2H), an increase in the upstream building width leads to an increase in the pollution level on the leeward wall of the canyon and a decrease in the roof-level concentrations at the upstream building; (4) when the upstream building width is longer than the critical width, the roof-level concentrations at the upstream building are negligibly small and the pollution level on the leeward wall of the canyon is almost unaffected by a further increase in the upstream building width; (5) when the buildings are placed upwind of the canyon, the flow attaches the upstream building roof and, therefore, almost none of the pollutants are distributed on the upstream building roof; and (6) the pollution levels inside the canyon and on the downstream building roof increase significantly with the number of upwind buildings.     

高含盐水样中悬浮物的准确测定

通过理论分析和大量实验工作，找出了现行国家标准的悬浮物测定方法在测定高含盐污水时的不足之处，并且提出了准确的测定方法。新方法不仅能很好地反映水样的实际状况，而且可以推广应用于各种复杂水样的悬浮物的测定。     

CONTRIBUTION OF PRECIPITATION TO QUALITY OF URBAN STORM RUNOFF1

Precipitation and runoff samples were collected for 13 storms in a nonindustrial urban area in Central Pennsylvania between July 1980 and June 1981. Runoff was collected from tree surfaces, a residential roof and street, a shopping mall parking lot, a downtown business district alley, and a heavily traveled street. Analysis of the water samples showed 10 to 25 percent of the nitrogen, 25 percent of the sulfate, and less than 5 percent of the phosphorus, potassium, and calcium in water below a tree was deposited by the precipitation. The residential roof caused insignificant changes in water chemistry. The results for the four paved areas showed that all the nitrogen, and from 16 to 40 percent of the sulfate and 13, 4, and 2 percent of the phosphorus, potassium, and calcium, respectively, in runoff was deposited by the precipitation. Precipitation can also be an important source of sulfate and phosphorus in runoff. All of the surfaces raised the pH of the runoff, with the largest increases, from a pH of 4 to about 7, occurring in runoff from the paved areas. Precipitation and runoff chemistry was not related to antecedent conditions such as the length of the preceding dry period.     

Results from Three Field Tracer Experiments on the Neighbourhood Scale in the City of Birmingham UK

The physical processes governing flow and pollutantdispersion at the neighbourhood scale, a spatial scaleintermediate between the street scale and the city scale, is notwell understood. Furthermore, it is not clear whether a traditional approach using averaged characteristics such as theaerodynamic roughness length is sufficient to predict the concentration field at this scale. To investigate pollutant dispersion in a real urban area, three field experiments were designed within the UK-URGENT programme sponsored by NERC. Theexperiments were performed in the City of Birmingham using a finite duration release of inert, non-toxic and non-depositingtracers, vis. perfluoromethylcyclohexane (PMCH) and perfluoromethylcyclopentane (PMCP). Measurements were taken using air bag samplers placedin an arc at 3.5 km (first experiment) and 1 km (second andthird experiments) from the source; some trap samplers wereplaced outside the main arc in the outskirts of the city. Measurements were analysed in the laboratory using anovel gas-chromatography technique. Data so obtained werecompared with predictions from a simple steady-state modeland a time-dependent model. The concentration-time serieswere very asymmetrical with a sharp rise, a plateau followedby a relatively slow decrease and finally a long-livedplateau above (or possibly very slow decrease to) thebackground level.