自主研发、技术引进与能源消耗强度——基于中国工业行业的实证分析

本文运用1998-2007年中国工业32个行业面板数据,将工业各行业研发总支出划分为自主研发、国外技术引进和国内技术转移三个部分,在估算自主研发存量和技术引进存量的基础上,研究了自主研发、技术引进对工业能源消耗强度的影响,并考察了能源相对价格、FDI的进入程度以及工业内部行业结构等因素.研究表明,自主研发和国外技术引进对能源强度的影响存在行业差异.自主研发对全工业行业和高能源强度行业的能源强度有显著负效应,对低能源强度行业的影响不显著;国内技术转移对全工业行业和低能源强度行业的能源强度有显著负的影响,对高能源强度行业的影响不显著;国外技术引进在所有样本中对能源强度的影响均不显著.研究还发现,在低能源强度行业中,自主研发并没有与国外技术引进互为补充共同促进能源强度的下降;在高、低能源强度行业样本中,自主研发没有与国内技术转移形成互补优势,有助于能源强度的下降.     

基于F-AHP的产业转移后可持续发展评价模型构建与实证研究

本着系统思想, 运用F AHP法,依据现有相关数据和多位专家意见,从产业自身发展、产业与区域经济发展、产业与区域社会发展、产业与区域资源环境发展4个模块30个指标构建产业转移后可持续发展评价指标体系,建立包含指标间模糊关系矩阵和面向参评产业的模糊评价矩阵的评价模型。通过模型评价了2006～2009年江苏苏北各市转移产业的可持续发展水平和能力。模型结果表明：苏北五市近年来承接的产业已获得较好的生存能力和可持续发展能力,但从可持续发展度的分值来看,苏北各市转移产业的可持续发展水平还不高;相比于传统产业,各市目前转移产业的可持续发展水平普遍较高,但苏北五市承接的产业有较大的同构性。因此,苏北各市下一阶段应优先发展比较优势产业,错位承接转移产业并考虑其可持续发展能力的培育     

宁波市大气可吸入颗粒物PM1o和PM2.5的源解析研究

在宁波市布设4个代表性点位,于2010年春季、夏季和冬季进行大气PM10和PM2.s的采样,同时采集了多种颗粒物源样品,建立了PM10、PM2.5和源样品的化学成分谱.采用化学质量平衡模型(CMB)对宁波市PM10、PM2.5进行源解析.结果表明,城市扬尘、煤烟尘、机动车尾气尘是宁波市PM10、PM2.5的3大污染源,...     

制药废水有机污染物特性分析与处理

分析了某制药企业废水生物处理站进出水中有机污染物的相对分子质量分布和气相色谱—质谱图谱,提出了根据废水水质特性有针对性地确定制药废水处理工艺的新思路.实验结果表明:进出水中的有机污染物主要是相对分子质量小于1 000的物质,且主要来源于车间5排放的COD比重大、水量小的工段废水;采用旋转蒸馏预处理法处理车间5废水,可使...     

Evaluation of photolysis and hydrolysis of pyraclostrobin in aqueous solutions and its degradation products in paddy water

This study evaluated the hydrolysis and photolysis kinetics of pyraclostrobin in an aqueous solution using ultra-high-performance liquid chromatography–photodiode array detection and identified the resulting metabolites of pyraclostrobin by hydrolysis and photolysis in paddy water using high-resolution mass spectrometry coupled with liquid chromatography. The effect of solution pH, metal ions and surfactants on the hydrolysis of pyraclostrobin was explored. The hydrolysis half-lives of pyraclostrobin were 23.1–115.5?days and were stable in buffer solution at pH 5.0. The degradation rate of pyraclostrobin in an aqueous solution under sunlight was slower than that under UV photolysis reaction. The half-lives of pyraclostrobin in a buffer solution at pH 5.0, 7.0, 9.0 and in paddy water were less than 12?h under the two light irradiation types. The metabolites of the two processes were identified and compared to further understand the mechanisms underlying hydrolysis and photolysis of pyraclostrobin in natural water. The extracted ions obtained from paddy water were automatically annotated by Compound Discoverer software with manual confirmation of their fragments. Two metabolites were detected and identified in the pyraclostrobin hydrolysis, whereas three metabolites were detected and identified in the photolysis in paddy water.     

Analysis of metabolic changes in Trichoderma asperellum TJ01 at different fermentation time-points by LC-QQQ-MS

Trichoderma spp. are among the most widely recognized biocontrol fungi used to inhibit pathogens and promote plant growth. These functions are related to primary and secondary metabolites. This study investigated the different metabolites in Trichoderma asperellum TJ01 cultured for 24 and 72?h using liquid chromatography with triple-quadrupole mass spectrometry. Compared to the 24?h culture of T. asperellum TJ01, the 72?h culture with amino acid metabolism tended to decrease while sugar and lipid metabolisms tended to increase. Furthermore, the 72?h culture had a higher proportion of upregulated flavonoids, in combination with a higher proportion of downregulated alkaloids, and equal proportions of upregulated and downregulated polyphenols and hormones. This study also identified a few valuable medicinal substances such as trigonelline and 5-hydroxytryptophan in T. asperellum TJ01 fermentation cultures.     

Experimental thermal storage research of organic binary phase change materials in building environment

This paper aims to reveal the heat transfer mechanism of low-temperature phase change material (PCM) and design PCM heat storage device in building heating environment. Firstly, low-temperature binary PCMs of lauric acid and stearic acid are prepared, and their thermal properties are investigated by DSC. Then, shell and tube latent heat thermal energy storage units are conducted, and heat transfer experiments are carried out to analyze the heat transfer mechanism of PCM. The results demonstrate that natural convection plays an important role in heat transfer process, and the heat storage efficiency of PCMs can be significantly enhanced by increasing the fin width and improving the inlet heat transfer fluid (HTF) temperature. Furthermore, some proposals are put forward to guide the design of PCM storage device in building heating environment.     

Experimental investigation of a solar water distillation-cum-drying unit

In this communication, a new design of solar-energy-based water distillation cum drying unit with parabolic reflector has been designed, fabricated, and tested. Bitter gourd and potato slices are chosen as a drying commodity. Thermal performance of the developed system has been evaluated based on the experimental results and using linear regression analysis. Heat transfer coefficients (convective, evaporative, and radiative) for solar distillation system have been observed to be 2.48–4.09, 13.25–52.38, and 8.75–9.66 W/m²°C, respectively. Overall thermal efficiency and exergy efficiency for the distillation system has been found to be 18.77% and 1.2%, respectively. The convective heat transfer coefficient for potato slices are observed higher for initial hours and decreases as the day progresses. The average convective heat transfer coefficients for bitter gourd and potato slices have been observed as 2.18 and 5.04 W/m²°C, respectively. Experimental error in terms of percent uncertainty for bitter gourd and potato slices are found to be 42.93% and 37.06%, respectively. The present design of solar distillation and drying in a single unit could be beneficial for the development of remote, arid, and rural areas.     

Study of lead phytoavailability for atmospheric industrial micronic and sub-micronic particles in relation with lead speciation

Particles from channelled emissions of a battery recycling facility were size-segregated and investigated to correlate their speciation and morphology with their transfer towards lettuce. Microculture experiments carried out with various calcareous soils spiked with micronic and sub-micronic particles (1650 ± 20 mg Pb kg⁻¹) highlighted a greater transfer in soils mixed with the finest particles. According to XRD and Raman spectroscopy results, the two fractions presented differences in the amount of minor lead compounds like carbonates, but their speciation was quite similar, in decreasing order of abundance: PbS, PbSO₄, PbSO₄·PbO, α-PbO and Pb⁰. Morphology investigations revealed that PM_2.5 (i.e. Particulate Matter 2.5 composed of particles suspended in air with aerodynamic diameters of 2.5 μm or less) contained many Pb nanoballs and nanocrystals which could influence lead availability. The soil-plant transfer of lead was mainly influenced by size and was very well estimated by 0.01 M CaCl₂ extraction.