考虑应变速率影响的混凝土重力坝非线性地震响应分析

通过引入应变速率、损伤变量以及刚度退化指标等参数,建立了应变率相关的混凝土弹塑性损伤模型。运用该模型对某重力坝厂房坝段分别就率相关及率无关两种情况进行了三维非线性地震响应时程分析。深入研究了混凝土应变速率等相关特性对结构动力响应的影响。结果表明,应变速率对混凝土的力学性能有一定的影响,随着应变速率的增加,坝体结构的变形减小,主拉应力有所提高,应变能有所减小以及开裂损伤有一定的降低。所得结论对混凝土重力坝的震害研究有一定的参考价值。     

FRP加固钢筋混凝土梁的抗剪计算方法

随着利用FRP加固混凝土结构研究的深入和应用的拓展,FRP加固钢筋混凝土梁抗剪性能的研究已取得了丰硕的成果。以往对抗剪承载力的分析大多是基于有效应变即对极限应变进行有效折减的方法,而最近的研究则引入了裂缝处FRP应变分布不均匀系数。在此基础上,本文综合考虑了FRP发挥的最大应变、沿裂缝应变分布的不均性以及斜裂缝倾角对有效应变的影响,提出了等效有效应变的概念,使计算趋于简单和清晰。本文收集了128根FRP全包裹的、以FRP断裂破坏为主的钢筋混凝土梁的抗剪实验数据,通过对主要影响因素的统计分析,建立了等效有效应变简单可靠的计算公式和基于FRP断裂的抗剪承载力设计方法。128根实验梁的抗剪计算结果表明,本文提出的方法简单可行,意义明确,且精度要比已有的建议公式稍高。     

地震台站体应变观测资料处理系统简介

介绍了新近研制的地震台站体应变观测资料的日常处理系统 ;简要地介绍了该系统及其数据库的结构以及各功能模块的作用。     

不同强度岩石中开挖圆形巷道的局部化过程模拟

利用FLAC模拟了不同粘聚力条件下圆形巷道的局部化过程。为了模拟巷道开挖,利用编写的F ISH函数删除巷道内部的单元。岩石服从莫尔库仑剪破坏与拉破坏复合的破坏准则,破坏之后呈现应变软化-理想塑性行为。文中模拟分为3步:首先,将静水压力施加在模型上,直到达到静力平衡状态;然后,利用编写的F ISH函数开挖巷道;最后,计算重新开始,直到达到静力平衡状态或者塑性流动状态。模拟结果表明,随着粘聚力的降低,巷道围岩的破坏模式首先由孔壁附近零星单元的破坏向4个对称的小V形坑式剪切破坏转变,然后由包含若干小V形坑的大V形坑式剪切破坏向巷道全断面的破坏转变。前三者破坏发生后,巷道围岩仍然能保持稳定。与最大塑性拉伸应变相比,最大剪切应变增量、最大塑性剪切应变要高得多;最大剪切应变增量、最大塑性剪切应变相差不大;随着粘聚力的增加,三者均越来越小。     

Effectiveness of a Light-Weight Ice-Vest for Body Cooling While Wearing Fire Fighter’s Protective Clothing in the Heat

The aim of the study was to examine the effects of wearing an ice-vest (ca 1 kg) on physiological and subjective responses in fire fighters. The experiments were carried out on a treadmill in a hot-dry environment. The physical cooling effect of the ice-vest was measured with a thermal manikin. The ice-vest effectively reduced skin temperatures under the vest. On average, heart rate was 10 beats/min lower, the amount of sweating was reduced by 13%, and subjective sensations of effort and warmth were lower during work with the ice-vest compared to work without it. Thermal manikin tests indicated that the useful energy available from the vest for body cooling was rather high (58%). In conclusion, the ice-vest reduces physiological and subjective strain responses during heavy work in the heat, and may promote efficient work time by 10%.     

交通荷载作用下饱和软粘土孔压-应变分析模型

针对交通荷载的作用特点设计了循环三轴试验,进而对交通荷载作用下饱和软粘土的动力特件进行厂研究.结果表明:循环荷载作用下,饱和软粘土存在临界循环应力比,采用孔压曲线所得到的临界循环应力比要小于采用应变曲线所得到的临界循环应力比.当土样不存在初始剪应力时,随着循环次数的增加,土样的应力-应变关系曲线近似原点对称,但随着初始剪应力的增大,应力-应变关系曲线逐渐表现为一系列平行曲线,峰值孔压与循环孔压幅值均逐渐减少;同时,轴应变的发展加快,但循环应变幅值逐渐减小.当循环应力比小于临界循环应力比时,对于同一初始剪应力,不同循环应力比下的孔压比-动应变曲线近似集中在同一条曲线上.通过对试验数据进行回归分析,得到了交通荷载作用下饱和软粘土残余孔压-累积塑性应变关系模型.     

Mycelial culture of wild Inonotus hispidus parasitizing the jujube tree and the cultivation conditions of its fruit body on rice medium北大核心CSCD

Inonotus hispidus is a kind of rare medicinal fungus, and its natural resources are very scarce. Currently, the artificial cultivation technology of I. hispidus is not completely developed, and this reflects on its extremely low biological conversion rate and long cultivation period. In order to improve the bioconversion rate and shorten the production cycle of I. hispidus, we first analyzed the mycelia culture conditions of the collected I. hispidus, and then we further explore the method of domesticated cultivation of its fruiting body in rice medium. During the process of mycelial culture, the suitable temperature, pH, carbon source, and nitrogen source for mycelial growth were selected using the mycelial growth rate as index. During the domesticated cultivation of the fruiting body, the suitable culture medium for its growth was selected using the bioconversion rate as index. Screening results of mycelial culture conditions showed that the optimal culture conditions for the growth of mycelium of the wild I. hispidus were: temperature of 25 °C, initial pH of 6.0, glucose as the carbon source, and yeast extract powder as the source of nitrogen. The results of the domesticated cultivation showed that the biotransformation rate of I. hispidus was higher when using rice as the main medium substrate. The optimal cultivation conditions were: a 0.2% yeast extract content in the nutrient solution, a 1:1.6 ratio of rice to nutrient solution, and a 4 mL inoculum of the liquid strain. Under these conditions, it took about 4 days for the mycelium to grow over the cultivation medium. The time required for the differentiation of the primordium to form fruit bodies was about 20 days, and the bioconversion rate reached 28.70% ± 5.05%. The results of this study indicate the feasibility of using rice as the main substrate for the cultivation of I. hispidus, and it also provide new insights for the finding of new cultivation substrates for other rare medicinal fungi. © 2018 Science Press. All rights reserved.     

莠去津降解菌HB-5的最佳产酶培养基及发酵条件

从农药厂废水中分离到一株降解莠去滓的节杆菌(Arthrobacter sp.)HB-5,以从该菌中提取到的降解酶对莠去津的降解率为指标,进行最佳产酶培养基及发酵条件的优化研究,对其产酶量进行了评价.通过正交试验和均匀试验,对细菌HB-5的发酵培养基进行了优化研究.运用SAS软件进行结果分析,所获优化培养基配方为:蔗糖3.0g·L-1,莠去津0.38g·L-1,K2HPO40.5g·L-1,KH2PO41.2 g·L-1,MgSO4·7H2O 1.2g·L-1,NaCl 0.1g·L-1,微量元素溶液3.8mL·L-1.得到菌株培养的最佳优化条件为:菌株发酵液培养时间为48h.接种量为2%,发酵液初始pH值为9,250mL三角瓶中装液量为80mL经优化后,降解酶对莠去津的降解率(91.64%)比原培养基(40.67%)提高了125%.     

一株石油烃降解菌的分离、鉴定及降解特性

从胜利油田采油厂石油污染土壤中分离筛选到一株石油高效降解菌SY-02,以石油烃为唯一碳源和能源。在总石油烃(TPH)浓度为1%(W/V)培养液中接种一定量的该菌,30℃、200r/min摇瓶振荡培养7d,TPH降解率可达71%。经形态、生理生化及16S rDNA同源性等指标分析,初步鉴定该菌种属Pseudomonas chlororaphis(绿针假单胞菌)。纯烃底物降解实验表明正十六烷最易被SY-02菌代谢,其次是单环芳烃苯,然后是二环芳烃萘和三环芳烃菲,环烷烃较难被利用。     

有机微污染源水生物预处理微生物菌种的分离筛选

以黄浦江为被处理源水 ,分别从染料化工厂二级生化处理厂和生活污水处理厂取得活性污泥 ,经驯化、分离 ,以对源水中TOC降解率为主要指标筛选得到 9个菌种 ,分别编号为 TD1～ 9.经测试这 9株菌对源水中 20 mg/L的 TOC具有 50 %左右的去除率 ;经初步分类鉴定 ,其中菌 TD1为芽孢杆菌属 ,TD2、3、7、8为放线菌目 ,TD4、5、6、9为假单胞菌属 .