Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

发展绿色经济是21世纪的必要抉择

发展绿色经济是各个国家处理环境与发展关系，实现可持续发展的抉择。本文着重介绍了绿色经济的内容，主要包括绿色产业、绿色贸易、等。在发展绿色经济方面，我国已有一定认识并取得了较大成就，但和发达国家相比还存在较大差距，必须下大力迎头赶上。     

赤峰地区的尾波Q值研究

本文根据安艺的尾波理论,使用赤峰台单台记录的地方震、近震尾波资料,通过数值计算,测定了赤峰地区(41°～44°N,117°～121°E)地壳介质的品质因数。结果表明,在赤峰市南部地区介质Q值分布呈西高东低的态势,而北部地区介质状态差异很大,个别局部区域存在Q值异常区。最后对本方法求得的Q值所涉及的范围及Q值与深度和频率的关系作了简单分析和讨论。     

钢厂热锯机噪声控制方案

某钢厂热锯机的工作噪声问题严重影响附近居民的日常生活，急需解决。根据其发声机理，通过采取对圆盘锯边缘开槽，安装吸隔声罩，对锯片增加阻尼材料，夹紧工件等措施取得了较好的降噪效果。     

VARIATION FEATURES OF PRECIPITATION IN GUANGXI

VariationfeaturesofprecipitationinGuangxiUnevendistributionofprecipitationinareas　ByreasonofcomplexlandforminGuangxi,theprecipitationvariesindifferentregionsandisgenerallyabundantinthesouthandthenorth,littleinthemiddleregion;abundantintheeastandlittleinthewest;abundantinhillyareasandlittleintherivervalleysandbasins;abundantinwindwardslopesandlittleinleewardslopes;abundantincoastlandandlittleinis lands.Therearemainly 4 pluvialregionsand 2littlerainfallregions.The 4pluvialregionswithprecipitat…     

生物降解高分子材料的研究现状及应用前景

目前,处理高分子材料的一些传统方法,如焚烧法、掩埋法、熔融共混挤出法、回收利用等都存在一定的缺陷和局限性,给环境保护带来严重的困难。因此,开发环境可接受的降解性高分子材料是解决环境污染的重要途径。生物降解高分子是指通过自然界或添加的微生物的化学作用,将高分子物质分解成小分子化合物,再进入自然的循环过程。论述了生物降解高分子材料的研究现状,并对生物降解高分子材料的降解机理、影响因素及其在医学、农业、包装业和其他领域的潜在应用前景进行了探讨。     

乙草胺、丁草胺和异丙甲草胺在室外天然水中的非生物降解及其影响因素

在亚热带冬、夏两季室外自然光照和温度条件下,研究了环境浓度下乙草胺、丁草胺和异丙甲草胺在河水和海水基底中的非生物降解(水解+光解)行为,并结合室内实验研究了非生物降解的影响因素.室外实验结果表明,冬季(气温12.30—26.98℃,平均17.47℃)乙草胺、丁草胺和异丙甲草胺在河水中的非生物降解半衰期(t1/2)为64—131 d、水解t1/2为105—346 d、光解t1/2为159—410 d,海水中非生物降解t1/2为89—193 d、水解t1/2为77—277 d、光解t1/2为417—630 d;夏季(气温20.77—30.37℃,平均27.22℃)3种目标农药在河水中非生物降解t1/2为4—20 d、水解t1/2为7—54 d、光解t1/2为7—32 d,海水中非生物降解t1/2为10—50 d、水解t1/2为23—67 d、光解t1/2为17—192 d.目标农药在海水中的残留持久性远高于河水;超纯水条件下,光解在目标农药的非生物降解中占主导地位;河水中的光解速率快于海水.室内实验发现,硝酸盐促进了3种目标农药的水解,同时对乙草胺和丁草胺的光解也起到促进作用;p H升高促进了异丙甲草胺的水解和光解速率,但是抑制了丁草胺的水解和乙草胺、丁草胺的光解;腐殖质添加浓度为10 mg·L-1和20 mg·L-1时促进了3种目标农药的水解,但在浓度达30 mg·L-1时则抑制了乙草胺的水解及异丙甲草胺的光解.总体而言,3种目标农药在实际水环境中的降解半衰期均较长,其降解机理和毒性效应值得进一步研究.     

粉状活性焦在双层滤料颗粒床中的脱硫试验研究

在双层滤料颗粒床模型试验台上对粒径为300～400目的粉状活性焦进行了脱硫试验,研究了温度、O2和水蒸气体积分数、气体流速、再生次数对脱硫效果的影响.试验结果表明.温度为120℃、O2体积分数为8%、水蒸气体积分数为10%条件下,脱硫效果最好;粉状活性焦在双层滤料颗粒床中经过7次重复吸附.达到硫饱和吸附量为66.2 mg/g.粉状活性焦再生试验表明,随着再生次数的增加.粉状活性焦的脱硫性能呈下降趋势.     

Effect of applying chemical fertilizers on forms of lead and cadmium in red soil

A three-month incubation study was undertaken to examine the influence of N, P and K on the various forms (soluble plus exchangeable (SE), weakly specifically adsorbed (WSA), Fe-Mn oxides bound (OX), organic matter complexed (OM) and residual fractions (RES)) of lead (Pb) and cadmium (Cd) in a red soil. Application of urea at the rate of 200 mg N/kg significantly lowered the SE fraction, but raised the WSA or OX fraction of both metals. Supply of 80 mg P/kg caused a decrease in the SE fraction of the two metals. The WSA fraction of Pb was reduced, whereas that of Cd increased by adding P. However, addition of 100 mg K/kg led to an increase in the SE fraction, but a decrease in the WSA fraction of Pb and Cd. Applying chemical fertilizers had no significant consistent influences on the other fractions of metals. These findings suggest that in heavy metal contaminated red soil, applying fertilizers does not only provide plant nutrients, but may also change the speciations and thus biovailability of heavy metals.     

Chemical methods and phytoremediation of soil contaminated with heavy metals

The effects of chemical amendments (calcium carbonate (CC), steel sludge (SS) and furnace slag (FS)) on the growth and uptake of cadmium (Cd) by wetland rice, Chinese cabbage and wheat grown in a red soil contaminated with Cd were investigated using a pot experiment. The phytoremediation of heavy metal contaminated soil with vetiver grass was also studied in a field plot experiment. Results showed that treatments with CC, SS and FS decreased Cd uptake by wetland rice, Chinese cabbage and wheat by 23-95% compared with the unamended control. Among the three amendments, FS was the most efficient at suppressing Cd uptake by the plants, probably due to its higher content of available silicon (Si). The concentrations of zinc (Zn), lead (Pb) and Cd in the shoots of vetiver grass were 42-67%, 500-1200% and 120-260% higher in contaminated plots than in control, respectively. Cadmium accumulation by vetiver shoots was 218 g Cd/ha at a soil Cd concentration of 0.33 mg Cd/kg. It is suggested that heavy metal-contaminated soil could be remediated with a combination of chemical treatments and plants.