A combined radical and non-radical oxidation processes for efficient degradation of Acid Orange 7 in the homogeneous Cu(II)/PMS system: important role of chloride

Environmental Science and Pollution Research - Trace copper ion (Cu(II)) in water and wastewater can trigger peroxymonosulfate (PMS) activation to oxidize organic compounds, but it only works under...     

Difference in the net value of ecological services between natural and artificial forests in China

Land degradation is a global problem that seriously threatens human society. However, in China and elsewhere, ecological restoration still largely relies on a traditional approach that focuses only on ecological factors and ignores socioeconomic factors. To improve the effectiveness of ecological restoration and maximize its economic and ecological benefits, a more efficient approach is needed that provides support for policy development and land management and thereby promotes environmental conservation. We devised a framework for assessing the value of ecosystem services that remain after subtracting costs, such as the opportunity costs, costs of forest protection, and costs for the people who are affected by the program; that is, the net value of ecosystem services (NVES). To understand the difference between the value of a resource and the net value of the ecosystem service it provides, we used data on VES, timber sales, and afforestation costs from China's massive national afforestation programs to calculate the net value of forest ecosystem services in China. Accounting for the abovementioned costs revealed an NVES of ¥6.1 × 10¹² for forests in 2014, which was 35.9% less than the value calculated without accounting for costs. As a result, the NVES associated with afforestation was 55.9% less than the NVES of natural forests. In some regions, NVES was negative because of the huge costs of human-made plantations, high evapotranspiration rates (thus, high water opportunity costs), and low forest survival rates. To maximize the ecological benefits of conservation, it is necessary to account for as many costs as possible so that management decisions can be based on NVES, thereby helping managers choose projects that maximize both economic and ecological benefits.     

地下水环境质量变化动态研究

以邢台市环境保护监测站１０年来的监测资料为依据，运用单因子比值法，环比发展速率外推法和直线回归法，对地下水环境质量现状及１０年的动态变化进行了分析，研究和评述，并对发展趋势做了预测性评价。     

消泡剂硅油I在工业废水氨氮测定中的应用

对色泽较深，含杂质量较高的废水加硅油I以抑制测定中蒸馏产生的泡沫．结果表明，在250ml水样中加硅油IO．10～1．25ml，即可收到理想效果．硅油I性质稳定，不随水蒸汽蒸出，对测定无干扰．     

上海汽车制造业涂装废气VOCs排放特征

于2015年10月对上海市嘉定区4家(A、B、C、D)汽车制造企业涂装废气ρ(VOCs)和组成特征进行了调查分析。结果表明,A、B、C、D厂涂装废气排放口ρ(VOCs)总为0. 743～6. 11 mg/m~3,主要检出物和最高检出值分别为:A厂二甲苯2. 06 mg/m~3、B厂二甲苯0. 578 mg/m~3、C厂甲苯2. 59 mg/m~3、D厂庚烷0. 274 mg/m~3;芳香烃类是A、B、C厂排放比例最高的VOCs组分,烷烃类是D厂排放比例最高的VOCs组分。指出,原、辅料种类影响排放物的主要成分,废气处理工艺类型影响排放物主要成分和浓度。     

大气连续采样在乌鲁木齐应用分析

对乌鲁木齐市大气连续采样方法试运行实验进行总结，比较了以往的定时采样方法后认为，连续采样方法更准确反映本地大气污染物的状况。     

高级氧化技术机理及在水处理中的应用进展

综述了近年来发展迅速的高级氧化技术，主要包括Fenton法、臭氧氧化法、湿式氧化技术、超临界水氧化法、纳米光催化氧化法电化学催化降解法及超声降解法等。介绍了各种高级氧化技术的基本原理及在废水处理中的应用进展，并对其特点进行了评述。     

狭窄海湾潮交换的分段模式Ⅰ.模式的建立

Ｋｕｏ 和 Ｎｅｉｌｓｏｎ 的分区段潮交换模式基于 Ｋｅｔｃｈｕｍ 潮冲程理论划分区段，并以各断面的回流系数来反映区段间的交换特征，是一个适合于狭长小潮湾沿程水交换近似估算的简捷有效的模式。本研究对该模式中的混合过程物理简化方式作了更为合理的修正，即引进了“内湾各相邻区段间水体混合交换同时发生”的设定。同时，基于对交换率概念的系统分析，本文还对模式中最重要的特征参数回流系数的特性及其简化确定方法作了进一步探讨     

对多氯联苯的全球分馏加以量化

由于有广泛的理化特性,多氯联苯(PCBs)在全球分馏假设求导中担任着重要角色,这种假设预测持久性有机污染混合物的组成随纬度产生变化.最新的历史排放估计、内部一致的特性数据集和按气候带平均的全球命运和运输模型结合在一起允许把PCBs所经历的成分转移作为环境区划、纬度和时间的一个函数的定量调查.模型模拟复制出纬度越高在大气和土壤中所观察到的较轻PCB同类物的相对丰度就越高,并量化了分割、持久性和排放在建立PCB格局过程中的相对重要性.组成变化不仅与倒转的浓度剖面一致(北极区浓度高于低纬度区)也与全球分馏一致,但只与向北转移的全球PCB存量的较小部分一致.     

电凝聚对微污染水杀菌效果的试验研究

采用电凝聚对微污染地表水进行杀菌处理,结果显示,杀菌率随电流密度和处理时间的增加而增大。在电流密度为4.64mA/cm2,处理时间为15min时,杀菌率达90%以上,并对杀菌机理进行实验研究,初步判定,电解过程中产生的HClO和水体中产生的·OH为重要杀菌因子。