A combined radical and non-radical oxidation processes for efficient degradation of Acid Orange 7 in the homogeneous Cu(II)/PMS system: important role of chloride

Environmental Science and Pollution Research - Trace copper ion (Cu(II)) in water and wastewater can trigger peroxymonosulfate (PMS) activation to oxidize organic compounds, but it only works under...     

Difference in the net value of ecological services between natural and artificial forests in China

Land degradation is a global problem that seriously threatens human society. However, in China and elsewhere, ecological restoration still largely relies on a traditional approach that focuses only on ecological factors and ignores socioeconomic factors. To improve the effectiveness of ecological restoration and maximize its economic and ecological benefits, a more efficient approach is needed that provides support for policy development and land management and thereby promotes environmental conservation. We devised a framework for assessing the value of ecosystem services that remain after subtracting costs, such as the opportunity costs, costs of forest protection, and costs for the people who are affected by the program; that is, the net value of ecosystem services (NVES). To understand the difference between the value of a resource and the net value of the ecosystem service it provides, we used data on VES, timber sales, and afforestation costs from China's massive national afforestation programs to calculate the net value of forest ecosystem services in China. Accounting for the abovementioned costs revealed an NVES of ¥6.1 × 10¹² for forests in 2014, which was 35.9% less than the value calculated without accounting for costs. As a result, the NVES associated with afforestation was 55.9% less than the NVES of natural forests. In some regions, NVES was negative because of the huge costs of human-made plantations, high evapotranspiration rates (thus, high water opportunity costs), and low forest survival rates. To maximize the ecological benefits of conservation, it is necessary to account for as many costs as possible so that management decisions can be based on NVES, thereby helping managers choose projects that maximize both economic and ecological benefits.     

南宁城市大气污染对人体健康的危害及治理对策

南宁市大气属煤烟型污染 ,大气的主要污染物为SO2 、NOx、TSP、降尘 ,虽然随着环境管理和污染治理工作的加强 ,污染物浓度逐年下降 ,但是工业区大气污染仍然较重。污染物流行病学调查显示 :工业区癌症和呼吸系统疾病死亡率均高于全市平均水平 2倍左右 ,城区又高于郊区 2倍 ,大气污染综合指数与呼吸内科门诊就诊人数呈正相关。用邓聚龙的灰色系统理论分析得知污染物对癌症和呼吸系统疾病死亡率有关联 ,关联度从大到小排序为 :TSP >降尘 >SO2 >NOx ,最后提出了大气污染治理的对策。     

转换电极的电动力强化植物修复高浓度砷污染土壤

电极转换下,以Capsicum annuum L.为对象探讨电动力强化的植物修复高浓度砷污染土壤效果。结果表明:对照组土壤pH降低,实验组升高。对照组土壤中砷浓度从（524.1±5.6） mg/kg降低为（500.5±8.3） mg/kg,实验组不同区域土壤砷浓度分别为（179.8±10.6）,（674.9±5.43）,（512.8±7.3） mg/kg。相较于对照组,实验组植物对砷的吸收量分别增加了-18.1%、282.8%和170.3%。对照组、实验组区域1、2、3的土壤和根际土壤砷浓度之比分别为2.62、0.64、1.48和1.26,电场增高了植物根系附近的砷浓度。对照组、实验组区域1、2、3土壤第5天的残渣态砷占比为55.64%、34.99%、39.06%和0%;对照组、实验组第5天阴极和第10天阴极附近土壤,结晶水铁铝氧化物结合态和残渣态砷占比为67.45%、0%和8.88%;体现了电场对土壤重金属形态的活化作用。实验组修复10 d的电耗成本为79.5元/m3,具备一定经济优势。     

组配改良剂联合硅肥对Cd污染稻田的修复效果

选取湖南省浏阳市某Cd污染稻田进行田间试验,研究组配改良剂石灰石+海泡石（LS）、基施硅肥及叶面喷施硅肥对Cd污染稻田修复效果,结果表明：（1）基施硅肥90kg/hm²和叶面喷施硅肥（0.2,0.4g/L）对土壤pH值无明显影响,添加LS（2250,4500kg/hm²）的各处理均显著提高土壤pH值（P < 0.05）.（2）基施硅肥90kg/hm²分别降低土壤交换态、毒性特征浸出（TCLP）提取态Cd含量20.0%和18.5%,叶面喷施硅肥对土壤Cd两种提取态含量无明显影响,添加LS的各处理（2250,4500kg/hm²）分别使土壤交换态、TCLP提取态Cd含量降低25.8%~49.9%、26.4%~44.5%.（3）3种单一技术措施均能明显降低水稻各部位Cd含量,但降低糙米中Cd含量的效果低于3种技术措施的组合处理;“组配改良剂LS+基施硅肥+叶面喷施硅肥”各处理（JL1F1、JL1F2、JL2F1、JL2F2）使水稻糙米中Cd含量降低25.6%~70.5%.（4）“组配改良剂LS+基施硅肥+叶面喷施硅肥”的组合技术处理能显著降低土壤中Cd的有效性,显著降低水稻各部位中Cd含量,其中JL2F2处理效果最佳,能使对照糙米Cd含量从0.66mg/kg降低到0.19mg/kg,实现中重度Cd污染稻田的水稻安全生产.     

等离子体处理的时效性对芳Ⅲ/双马复合材料耐湿热性能的影响

目的考察等离子体处理前后及其时效性对芳Ⅲ/双马复合材料弯曲强度、界面性能及耐湿热性能的影响。方法用低温射频耦合等离子体处理芳纶纤维表面,分别将未处理的、等离子体刚处理过的和等离子体处理后在空气中放置三天后的纤维通过溶液预浸渍工艺制备芳Ⅲ/双马复合材料预浸料,再经过高温模压成形技术制备芳Ⅲ/双马复合材料单向板。采用万能材料试验机对水煮前后复合材料的弯曲强度和层间剪切强度进行测试,利用扫描电子显微镜对复合材料层间剪切破坏形貌进行观察。结果等离子体处理后,复合材料的吸水率由未处理时的0.51%下降到0.33%,复合材料层间剪切强度由49.4 MPa提高到62.9 MPa。等离子体处理时效后复合材料的吸水率增加到0.69%,复合材料的层间剪切强度下降到56.0 MPa。结论等离子体处理提高了复合材料界面性能,但等离子体处理的时效后,复合材料的界面性能及其耐湿热性能有所下降。等离子体处理及时效性对复合材料的弯曲强度和耐湿热性能变化不大。     

地下水环境质量变化动态研究

以邢台市环境保护监测站１０年来的监测资料为依据，运用单因子比值法，环比发展速率外推法和直线回归法，对地下水环境质量现状及１０年的动态变化进行了分析，研究和评述，并对发展趋势做了预测性评价。     

消泡剂硅油I在工业废水氨氮测定中的应用

对色泽较深，含杂质量较高的废水加硅油I以抑制测定中蒸馏产生的泡沫．结果表明，在250ml水样中加硅油IO．10～1．25ml，即可收到理想效果．硅油I性质稳定，不随水蒸汽蒸出，对测定无干扰．     

上海汽车制造业涂装废气VOCs排放特征

于2015年10月对上海市嘉定区4家(A、B、C、D)汽车制造企业涂装废气ρ(VOCs)和组成特征进行了调查分析。结果表明,A、B、C、D厂涂装废气排放口ρ(VOCs)总为0. 743～6. 11 mg/m~3,主要检出物和最高检出值分别为:A厂二甲苯2. 06 mg/m~3、B厂二甲苯0. 578 mg/m~3、C厂甲苯2. 59 mg/m~3、D厂庚烷0. 274 mg/m~3;芳香烃类是A、B、C厂排放比例最高的VOCs组分,烷烃类是D厂排放比例最高的VOCs组分。指出,原、辅料种类影响排放物的主要成分,废气处理工艺类型影响排放物主要成分和浓度。