Research progress and hot spots of hydrothermal liquefaction for bio-oil production based on bibliometric analysis

Environmental Science and Pollution Research - Hydrothermal liquefaction (HTL) of biomass used HTL reaction under high temperature and pressure to produce bio-oil. This technology is considered as...     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

How does population structure affect pollutant discharge in China? Evidence from an improved STIRPAT model

Environmental Science and Pollution Research - China is the most populous country in the world, and the pollution caused by the excessive population should not be underestimated. In recent years,...     

生态系统服务功能及其价值核算

生态系统服务功能是指生态系统服务与生态系统功能的综合，指生态系统与生态过程所形成及所维持的人类赖以生存的自然环境条件与效用，生态系统服务功能对于人类生存发展具有重要的价值，应该在社会经济体系中得以体现，本文探讨了生态系统服务功能的类型，价值核算方法与理论及其应用研究在完善国民经济核算体系、促进可持续发展等方面的重要意义，并对今后发展进行了展望。     

南宁城市大气污染对人体健康的危害及治理对策

南宁市大气属煤烟型污染 ,大气的主要污染物为SO2 、NOx、TSP、降尘 ,虽然随着环境管理和污染治理工作的加强 ,污染物浓度逐年下降 ,但是工业区大气污染仍然较重。污染物流行病学调查显示 :工业区癌症和呼吸系统疾病死亡率均高于全市平均水平 2倍左右 ,城区又高于郊区 2倍 ,大气污染综合指数与呼吸内科门诊就诊人数呈正相关。用邓聚龙的灰色系统理论分析得知污染物对癌症和呼吸系统疾病死亡率有关联 ,关联度从大到小排序为 :TSP >降尘 >SO2 >NOx ,最后提出了大气污染治理的对策。     

Analysis of Environmental and Socio-economic Determinants Affecting Population Longevity Level at County Level in China

INTRODUCTIONIn recent thirty years, due to the decreasing fertility andincreasing life expectancy, China's population is aging ata very rapid pace and the elderly population size is keepingon growing. During the dramatic aging progress, the oldestold group in China is catching our eyes. More and moreold people of China are becoming the oldest old. Theextremely old population (aged 80 and above) is increasingat 5.1% annually, while the old population above 65 isincreasing at 2.9%, and the…     

基于LOADEST和数字滤波的水源地基流氮素输出定量方法应用实例

地表直接径流和基流均是流域非点源氮/磷养分输出的重要水文途径.科学认识和定量模拟基流氮/磷养分输出对于准确解析水源地水体非点源污染来源至关重要.基于Load Estimator模型和数字滤波算法,建立了定量水源地基流氮素输出的方法体系.以浙江省珊溪水源地的玉泉溪流域为例,利用玉泉溪2010-01—2013-12期间逐月总氮(TN)水质监测数据和逐日流量数据,展示了该方法的计算过程.结果表明,本文建立的水源地基流氮素输出定量方法结果合理,模拟精度高,决定系数和纳什系数分别为0.83和0.80;玉泉溪流域2010—2013年TN负荷量为141.21～274.68 t·a~(-1),平均208.63 t·a~(-1),年基流TN负荷量为84.39～168.68 t·a~(-1),平均127.69 t·a~(-1);基流对玉泉溪年均TN负荷量贡献率高达60%以上,流域基流养分输出对地表水体的污染应引起足够重视.     

基于两种再分析资料的一次四川盆地大气污染过程气象要素数值模拟研究

利用ECMWF-ERA5和NCEP-FNL再分析资料作为中尺度气象模式WRF（The Weather Research and Forecasting）初始场,对四川盆地2018年1月一次大气污染过程气象要素进行了模拟,对比分析了气温、风速、风向、相对湿度、边界层高度、温廓线的模拟效果,并结合大气超级站观测数据对模拟结果进行评估.结果表明：两种资料均能较好地模拟出气象要素的变化情况,但由于两套资料时空分辨率、采用的模式、同化方案、数据来源和质量控制方案存在一定区别,导致各要素模拟效果并不一致.与NCEP-FNL相比,ECMWF-ERA5模拟的平均相对湿度（59.23%）与观测值差异更小,且均方根误差、偏差较小,分别为9.83%和-0.83%,但NCEP-FNL模拟的平均气温（8.99℃）更接近观测值,且偏差值较小,为-0.04℃.两组模拟结果均显示盆地内部为模拟区域的低风速区,相对湿度模拟值在60%以上,气温高于西部山地地区.NCEP-FNL模拟的盆地内部气温、相对湿度、风速小于ECMWF-ERA5模拟值,但边界层高度模拟值较大.ECMWF-ERA5模拟的逆温强度相比较小,且温度露点差较小.此次污染过程PM_2.5和PM₁₀日均浓度最大值分别为190.1 μg·m^-3和261.0 μg·m^-3,相对湿度增大引发的颗粒物吸湿增长是导致PM_2.5和PM₁₀质量浓度突增的主要原因.     

近14年西北地区甲醛柱浓度的时空变化研究

基于臭氧监测仪（OMI）卫星反演数据,对2005~2018年西北4省区域大气甲醛柱浓度数据进行提取及分析,探讨其时空变化特征及影响因素.结果表明：在时间变化上,14a甲醛柱浓度整体呈先上升后下降的波动变化趋势,夏秋季显著高于冬春季,且冬季均值略高于春季.在空间分布上,甲醛柱浓度自西向东、自北向南逐渐升高,高值区集中于陕西和甘肃东南部及青海西南部;低值区集中于宁夏、青海和甘肃的西北部;稳定性呈现出东部分散、西部集聚、差异显著的分布格局.影响甲醛柱浓度变化的因素包括自然和人为因素,自然因素中,甲醛柱浓度受地形影响显著,与风向、气温均呈现显著正相关;人为因素中,甲醛柱浓度与人口密度、地区生产总值、工业废气排放量及建筑房屋竣工面积均表现出正相关关系,与工业废气排放量的相关度最高.大气中甲醛分子与气溶胶粒子二者间呈显著正相关关系,这进一步说明甲醛浓度受到了诸多因素的综合影响,但气溶胶粒子、气温及工业废气的排放是主导因素.     

泗顶矿区6种土地利用类型土壤微生物群落结构特征

以广西柳州泗顶铅锌矿区的玉米地、菜地、灌木、尾矿库、森林和柑橘园6种不同利用类型土壤为研究对象,采用高通量测序技术,分析了不同土地利用类型土壤微生物群落结构特征及土壤环境因子对微生物群落结构的影响.结果表明,变形菌门（Proteobacteria）是6种土壤的优势菌门,所占比例为31.34%~53.47%,γ-变形菌纲（Gammaproteobacteria）为优势菌纲.冗余分析表明,在重金属含量最高的灌木区,厚壁菌门（Firmicutes）和拟杆菌门（Bacteroidetes）的丰度与土壤中铅、锌、镉、铜的含量呈现显著正相关;在土壤钠和钾含量较高的玉米地和菜地,浮霉菌门（Planctomycetes）的丰度有所增加,而厚壁菌门和拟杆菌门的丰度则有所下降.在土壤有机质含量较高而总氮、总磷含量较低的柑橘园,酸杆菌门（Acidobacteria）和疣微菌门（Verrucomicrobia）的丰度较高.芽单胞菌门（Gemmatimonadetes）和浮霉菌门的丰度与土壤pH值呈显著正相关.研究结果表明土地利用类型及土壤环境因子对土壤微生物群落结构多样性有显著的影响.