Research progress and hot spots of hydrothermal liquefaction for bio-oil production based on bibliometric analysis

Environmental Science and Pollution Research - Hydrothermal liquefaction (HTL) of biomass used HTL reaction under high temperature and pressure to produce bio-oil. This technology is considered as...     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

How does population structure affect pollutant discharge in China? Evidence from an improved STIRPAT model

Environmental Science and Pollution Research - China is the most populous country in the world, and the pollution caused by the excessive population should not be underestimated. In recent years,...     

苯甲酰苯胺光化学行为的共振拉曼光谱

采用共振拉曼光谱技术和量子化学计算研究了苯甲酰苯胺在甲醇和乙腈溶液中的短时光化学动力学行为.结果表明,苯甲酰苯胺的非平面反式结构为最稳定结构;在Frank-Condon区域内,苯甲酰苯胺主要由9个活性振动模组成;其中v24(苯环上C=C不对称伸缩振动和CCH的面内弯曲振动,NH面内弯曲振动)振动模在甲醇溶剂中的强度远远大于其在乙腈的强度;与脂肪酰胺类化合物和苯甲酰胺的研究结果比较发现,苯基取代-NH2上的H原子使得C=C不再具有明显的溶剂效应.     

南宁城市大气污染对人体健康的危害及治理对策

南宁市大气属煤烟型污染 ,大气的主要污染物为SO2 、NOx、TSP、降尘 ,虽然随着环境管理和污染治理工作的加强 ,污染物浓度逐年下降 ,但是工业区大气污染仍然较重。污染物流行病学调查显示 :工业区癌症和呼吸系统疾病死亡率均高于全市平均水平 2倍左右 ,城区又高于郊区 2倍 ,大气污染综合指数与呼吸内科门诊就诊人数呈正相关。用邓聚龙的灰色系统理论分析得知污染物对癌症和呼吸系统疾病死亡率有关联 ,关联度从大到小排序为 :TSP >降尘 >SO2 >NOx ,最后提出了大气污染治理的对策。     

三峡库区中低产土壤重金属含量及其与小麦吸收的关系

三峡库区中低产土壤的Hg,As,Cr,Pb,Cu五个重金属含量（除渝北区外），均在国家土壤环境质量标准内，属自然背景值一级标准。Cd和Zn高于全国土壤中的平均含量和背景值含量，属二级标准。土壤的重金属含量与土壤母质类型，pH值，阳离子交换量，有机质，无定形铁和物理性粘粒有关，同时存在一定的地域分布。重庆近郊的土壤所有重金属含量相对较高。土壤重金属的可给态或有效性含量极低，锌和铜不是过量，而是不足。小麦籽粒中As,Cr,Pb,Zn,Cu含量低于国家食品对重金属限量标准和小麦籽粒背景值标准，Hg,Cd含量高于国家规定标准。籽粒中的Cu,Zn含量是小麦茎叶中的2.0-2.2倍，而茎叶中的Hg,Pb,As,Cr,Cd含量明显高于籽粒。     

湖北省土地资源遥感调查与评价

根据1999年TM影像解译了湖北省土地利用现状，然后以土地利用现状图为基础，采用地理信息系统技术，结合湖北省的实际情况，选择土壤、地形、坡度等评价因子，对湖北省土地资源进行了适宜性评价，简要地将全省土地资源划分为九等。评价结果表明：湖北省水热条件好，土地适宜性广，宜农林牧业同时利用的土地广泛分布；但是该省的基本农田面积小，土地垦殖率高，低产田面积大，后备耕地资源严重不足；土地利用结构与土地资源的供给条件、利用要求不相适宜，利用效益末得到充分发挥。     

Analysis of Environmental and Socio-economic Determinants Affecting Population Longevity Level at County Level in China

INTRODUCTIONIn recent thirty years, due to the decreasing fertility andincreasing life expectancy, China's population is aging ata very rapid pace and the elderly population size is keepingon growing. During the dramatic aging progress, the oldestold group in China is catching our eyes. More and moreold people of China are becoming the oldest old. Theextremely old population (aged 80 and above) is increasingat 5.1% annually, while the old population above 65 isincreasing at 2.9%, and the…     

焦化废水处理过程中固相物质的形成及处置方法评价

焦化废水处理过程中产生的焦油、污泥和结晶杂盐等固相物质,既有资源属性,又有污染特性,但目前缺乏基于能源、经济及环境影响方面的评估.本研究阐述了3类固相物质的形成机制,建立了质量当量计算及处置方法评价模型.以宝武集团韶关钢铁股份有限公司焦化厂（二期）焦化废水处理工程的A/O/H/O（厌氧/好氧/水解/好氧）流化床工艺作为考察对象,利用工程运行参数和水质统计数据进行固相物质的产量推算,结果发现,焦油、物化污泥、生物污泥（含水率为80%）和工业杂盐的产率分别为0.186、5.80、4.24和1.97 kg·m^-3.通过处置方法评价模型明确了焦油焚烧、污泥热解、结晶杂盐分盐提纯后工业应用是最佳处置方案,在60 m³·h^-1废水处理规模的固相物质处置过程中,每年约产生1177 MWh的能源,获得135.0万元的经济效益,排放627.0 t CO₂,表明能源回收、经济效益和环境影响的协同存在.     

临沂市区主要大气污染物的污染特征及其对居民健康的影响

大气污染是全球性的公共环境健康问题.本研究基于临沂市区2015年6种大气污染物（PM_2.5、PM₁₀、SO₂、NO₂、CO、O₃）的逐日监测数据,分析了污染物的污染特征及其与气象因子的相关性,通过构建广义相加模型,模拟分析了单个污染物与居民呼吸、循环系统疾病门诊人次的暴露-反应关系.结果表明,PM_2.5和PM₁₀是临沂市区首要大气污染物,NO₂和SO₂次之,O₃和CO浓度较低;除O₃外,其它5种污染物之间呈显著正相关,与风速、温度、相对湿度3个气象因子呈负相关,浓度水平冬季高、夏季低;O₃与温度呈显著正相关.对于呼吸系统疾病,单个污染物每增加10 μg·m^-3（CO每增加0.1 mg·m^-3）的最大效应情况是：PM₁₀、SO₂、NO₂、CO均在当天（lag0）使得门诊人次分别增加0.36%、1.77%、1.29%、0.69%,PM_2.5和O₃分别在累积滞后6 d（lag05）和单日滞后3 d（lag3）使得门诊人次分别增加0.6%和1.07%;对于循环系统疾病,单个污染物每增加10 μg·m^-3（CO每增加0.1 mg·m^-3）的最大效应是：PM_2.5、PM₁₀均在累积滞后5 d（lag04）使得门诊人次分别增加0.72%、0.80%,SO₂、NO₂均在累积滞后6 d使得门诊人次分别增加3.55%、3.54%,CO和O₃则分别在当天和单日滞后3 d使得门诊人次分别增加0.77%、1.39%.对于呼吸、循环系统疾病,PM_2.5、PM₁₀、CO、O₃对男性的影响均大于女性,SO₂则反之;NO₂对男性呼吸系统和女性循环系统影响较大.大气污染物对少年（7~17岁）呼吸系统和对中年（41~65岁）循环系统影响较大.临沂市区6种大气污染物存在不同程度的污染,对居民呼吸、循环系统疾病均有不同程度的影响,且存在性别和年龄的差异.