基于神经网络模型的千岛湖清洁水体叶绿素a遥感反演研究

叶绿素a浓度值是水体水质评价的重要指标,研究基于高分一号(GF-1)卫星遥感影像,利用神经网络模型,选用6节点的隐含层设置,构建了千岛湖清洁水体叶绿素a浓度反演模型,对其叶绿素a浓度值时空特征进行分析,并与其他常规反演方法精确度进行比较.研究结果表明,利用神经网络模型对千岛湖清洁水体叶绿素a浓度值进行反演是可行的,且与其他常规方法相比,该模型对于叶绿素a含量低的内陆清洁水体反演有着更高的相关性(R2 = 0.921 8);在空间分布上,千岛湖区域水体叶绿素a浓度整体较低,高叶绿素a浓度区域主要集中易受人类活动干扰的西南及东北区域;年际变化分析表明,千岛湖区域水体叶绿素a浓度稳定,且波动较小,平均叶绿素a浓度值皆维持在1.70～1.75 pg/L之间,清洁水体特征显著.     

Research progress and hot spots of hydrothermal liquefaction for bio-oil production based on bibliometric analysis

Environmental Science and Pollution Research - Hydrothermal liquefaction (HTL) of biomass used HTL reaction under high temperature and pressure to produce bio-oil. This technology is considered as...     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

How does population structure affect pollutant discharge in China? Evidence from an improved STIRPAT model

Environmental Science and Pollution Research - China is the most populous country in the world, and the pollution caused by the excessive population should not be underestimated. In recent years,...     

企业社会责任:推动可持续发展的第三种力量

可持续发展是企业社会责任的重要领域。企业社会责任在推动可持续发展方面发挥着独特的作用。一定程度上弥补了政府干预和市场调节的缺陷。我国企业承担可持续发展责任需要企业和社会的互动。     

南宁城市大气污染对人体健康的危害及治理对策

南宁市大气属煤烟型污染 ,大气的主要污染物为SO2 、NOx、TSP、降尘 ,虽然随着环境管理和污染治理工作的加强 ,污染物浓度逐年下降 ,但是工业区大气污染仍然较重。污染物流行病学调查显示 :工业区癌症和呼吸系统疾病死亡率均高于全市平均水平 2倍左右 ,城区又高于郊区 2倍 ,大气污染综合指数与呼吸内科门诊就诊人数呈正相关。用邓聚龙的灰色系统理论分析得知污染物对癌症和呼吸系统疾病死亡率有关联 ,关联度从大到小排序为 :TSP >降尘 >SO2 >NOx ,最后提出了大气污染治理的对策。     

Analysis of Environmental and Socio-economic Determinants Affecting Population Longevity Level at County Level in China

INTRODUCTIONIn recent thirty years, due to the decreasing fertility andincreasing life expectancy, China's population is aging ata very rapid pace and the elderly population size is keepingon growing. During the dramatic aging progress, the oldestold group in China is catching our eyes. More and moreold people of China are becoming the oldest old. Theextremely old population (aged 80 and above) is increasingat 5.1% annually, while the old population above 65 isincreasing at 2.9%, and the…     

基于两种再分析资料的一次四川盆地大气污染过程气象要素数值模拟研究

利用ECMWF-ERA5和NCEP-FNL再分析资料作为中尺度气象模式WRF（The Weather Research and Forecasting）初始场,对四川盆地2018年1月一次大气污染过程气象要素进行了模拟,对比分析了气温、风速、风向、相对湿度、边界层高度、温廓线的模拟效果,并结合大气超级站观测数据对模拟结果进行评估.结果表明：两种资料均能较好地模拟出气象要素的变化情况,但由于两套资料时空分辨率、采用的模式、同化方案、数据来源和质量控制方案存在一定区别,导致各要素模拟效果并不一致.与NCEP-FNL相比,ECMWF-ERA5模拟的平均相对湿度（59.23%）与观测值差异更小,且均方根误差、偏差较小,分别为9.83%和-0.83%,但NCEP-FNL模拟的平均气温（8.99℃）更接近观测值,且偏差值较小,为-0.04℃.两组模拟结果均显示盆地内部为模拟区域的低风速区,相对湿度模拟值在60%以上,气温高于西部山地地区.NCEP-FNL模拟的盆地内部气温、相对湿度、风速小于ECMWF-ERA5模拟值,但边界层高度模拟值较大.ECMWF-ERA5模拟的逆温强度相比较小,且温度露点差较小.此次污染过程PM_2.5和PM₁₀日均浓度最大值分别为190.1 μg·m^-3和261.0 μg·m^-3,相对湿度增大引发的颗粒物吸湿增长是导致PM_2.5和PM₁₀质量浓度突增的主要原因.     

近14年西北地区甲醛柱浓度的时空变化研究

基于臭氧监测仪（OMI）卫星反演数据,对2005~2018年西北4省区域大气甲醛柱浓度数据进行提取及分析,探讨其时空变化特征及影响因素.结果表明：在时间变化上,14a甲醛柱浓度整体呈先上升后下降的波动变化趋势,夏秋季显著高于冬春季,且冬季均值略高于春季.在空间分布上,甲醛柱浓度自西向东、自北向南逐渐升高,高值区集中于陕西和甘肃东南部及青海西南部;低值区集中于宁夏、青海和甘肃的西北部;稳定性呈现出东部分散、西部集聚、差异显著的分布格局.影响甲醛柱浓度变化的因素包括自然和人为因素,自然因素中,甲醛柱浓度受地形影响显著,与风向、气温均呈现显著正相关;人为因素中,甲醛柱浓度与人口密度、地区生产总值、工业废气排放量及建筑房屋竣工面积均表现出正相关关系,与工业废气排放量的相关度最高.大气中甲醛分子与气溶胶粒子二者间呈显著正相关关系,这进一步说明甲醛浓度受到了诸多因素的综合影响,但气溶胶粒子、气温及工业废气的排放是主导因素.     

金属表面涂装行业VOCs排放特征及排放系数

对比了浙江省2014和2018年金属表面涂装企业的有机废气排放及治理情况,分析了该行业涂料及稀释剂的使用、主要污染因子,测算了溶剂型、水性涂料的挥发性有机物（VOCs）产生系数和排放系数.结果表明：2018年VOCs治理水平明显高于2014年,水性涂料使用企业比例由18%上升至36%,纯溶剂型企业由82%下降至64%;金属表面涂装行业的主要排放污染物为二甲苯、丁醇、乙酸乙酯、乙酸丁酯、甲苯、丙二醇、乙苯、苯乙烯等8种有机物.溶剂型和水性涂料的VOCs产生系数分别为0.72和0.31kg/kg;溶剂型和水性涂料2014年VOCs排放系数为0.64和0.29kg/kg,2018年为0.48和0.21kg/kg.