Research progress and hot spots of hydrothermal liquefaction for bio-oil production based on bibliometric analysis

Environmental Science and Pollution Research - Hydrothermal liquefaction (HTL) of biomass used HTL reaction under high temperature and pressure to produce bio-oil. This technology is considered as...     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

How does population structure affect pollutant discharge in China? Evidence from an improved STIRPAT model

Environmental Science and Pollution Research - China is the most populous country in the world, and the pollution caused by the excessive population should not be underestimated. In recent years,...     

南宁城市大气污染对人体健康的危害及治理对策

南宁市大气属煤烟型污染 ,大气的主要污染物为SO2 、NOx、TSP、降尘 ,虽然随着环境管理和污染治理工作的加强 ,污染物浓度逐年下降 ,但是工业区大气污染仍然较重。污染物流行病学调查显示 :工业区癌症和呼吸系统疾病死亡率均高于全市平均水平 2倍左右 ,城区又高于郊区 2倍 ,大气污染综合指数与呼吸内科门诊就诊人数呈正相关。用邓聚龙的灰色系统理论分析得知污染物对癌症和呼吸系统疾病死亡率有关联 ,关联度从大到小排序为 :TSP >降尘 >SO2 >NOx ,最后提出了大气污染治理的对策。     

搞好生态建设,转移农村剩余劳动力

大量闲置劳动力会造成巨大生态压力,加剧生态退化,但只要转移消化得当,便能化为强大的力量和优势。本文从区域→行业→企业→家庭→生态建设联合体五个层次和角度,对各种有效的和有可能的转移消化闲置劳动力生态建设途径进行了探索。     

Analysis of Environmental and Socio-economic Determinants Affecting Population Longevity Level at County Level in China

INTRODUCTIONIn recent thirty years, due to the decreasing fertility andincreasing life expectancy, China's population is aging ata very rapid pace and the elderly population size is keepingon growing. During the dramatic aging progress, the oldestold group in China is catching our eyes. More and moreold people of China are becoming the oldest old. Theextremely old population (aged 80 and above) is increasingat 5.1% annually, while the old population above 65 isincreasing at 2.9%, and the…     

亚热带稻田土壤碳氮磷生态化学计量学特征

为了解稻田土壤中是否存在稳定的土壤有机碳(C)、氮(N)和磷(P)比值,基于亚热带区110个水稻土剖面和587个发生层的土壤调查数据库,在区域尺度上分析了典型水稻土C∶N∶P比值的生态化学计量学特征,并应用相关分析和冗余分析,研究水稻土C∶N∶P比值与土壤-环境因子(地形和母质、土壤发生层、土壤类型和土壤理化性质)的关系.结果显示,亚热带区稻田土壤C∶N、C∶P和N∶P的剖面加权平均值分别为12. 6、49和3. 9,C∶N∶P为38∶3. 2∶1.不同母质起源、不同土壤亚类和不同发生层的水稻土C∶N变异相对较小;但C∶P和N∶P的变异很大,两者均值也远低于全球(186和13. 1)和中国土壤(136和9. 3)的C∶P和N∶P的平均水平.尽管稻田土壤剖面的C∶N∶P相对不稳定,但由于稻田表土生物与环境相互作用强烈,表土C∶N相对稳定(14. 2).这反映长期水耕熟化作用下,稻田表土中C和N仍存在紧密的耦合作用.然而,在稻田土壤剖面上,C∶P和N∶P并不稳定,SOC与全P含量、全N与全P含量也无显著相关性,表明环境变化可能导致土壤C∶N∶P解耦.地形、土壤质地、氧化铁和容重是调控稻田土壤剖面C∶N∶P的关键土壤环境因子.     

基于两种再分析资料的一次四川盆地大气污染过程气象要素数值模拟研究

利用ECMWF-ERA5和NCEP-FNL再分析资料作为中尺度气象模式WRF（The Weather Research and Forecasting）初始场,对四川盆地2018年1月一次大气污染过程气象要素进行了模拟,对比分析了气温、风速、风向、相对湿度、边界层高度、温廓线的模拟效果,并结合大气超级站观测数据对模拟结果进行评估.结果表明：两种资料均能较好地模拟出气象要素的变化情况,但由于两套资料时空分辨率、采用的模式、同化方案、数据来源和质量控制方案存在一定区别,导致各要素模拟效果并不一致.与NCEP-FNL相比,ECMWF-ERA5模拟的平均相对湿度（59.23%）与观测值差异更小,且均方根误差、偏差较小,分别为9.83%和-0.83%,但NCEP-FNL模拟的平均气温（8.99℃）更接近观测值,且偏差值较小,为-0.04℃.两组模拟结果均显示盆地内部为模拟区域的低风速区,相对湿度模拟值在60%以上,气温高于西部山地地区.NCEP-FNL模拟的盆地内部气温、相对湿度、风速小于ECMWF-ERA5模拟值,但边界层高度模拟值较大.ECMWF-ERA5模拟的逆温强度相比较小,且温度露点差较小.此次污染过程PM_2.5和PM₁₀日均浓度最大值分别为190.1 μg·m^-3和261.0 μg·m^-3,相对湿度增大引发的颗粒物吸湿增长是导致PM_2.5和PM₁₀质量浓度突增的主要原因.     

外源8''-炔基脱落酸强化东南景天吸收重金属的研究

为探究脱落酸类似物8''-炔基脱落酸[8''-（C₂H）ABA]强化东南景天富集重金属的效应,通过水培的方法研究了外源8''-（C₂H）ABA分别对Cd（20 mg·L^-1）、Zn（160 mg·L^-1）单一胁迫下东南景天Cd/Zn积累和生理特性的影响,以及初步探讨了8''-（C₂H）ABA在植物重金属胁迫响应中的作用.实验结果表明：与天然ABA相比,外源8''-（C₂H）ABA能达到与ABA类似的作用效果,且对Cd胁迫下东南景天促进效果好于Zn;在Cd胁迫下,与对照相比,外源8''-（C₂H）ABA能显著增加东南景天根、叶中的Cd含量（44.2%、27.5%）,以及光合色素（10.7%）和叶中过氧化物酶（SOD）活性（52.9%）、超氧化物歧化酶（POD）（24.7%）和过氧化氢酶（CAT）活性（27.9%）抗氧化酶活性,使可溶性糖（SS）（13%）和游离脯氨酸（Pro）（37.4%）含量增加,而叶中丙二醛（MDA）（40%）含量明显降低.上述结果表明,一定浓度的8''-（C₂H）ABA可以提高东南景天抗氧化酶活性来增强其对重金属Cd的抗性及吸收和转运能力,在强化东南景天修复重金属污染方面具有应用潜力.     

近14年西北地区甲醛柱浓度的时空变化研究

基于臭氧监测仪（OMI）卫星反演数据,对2005~2018年西北4省区域大气甲醛柱浓度数据进行提取及分析,探讨其时空变化特征及影响因素.结果表明：在时间变化上,14a甲醛柱浓度整体呈先上升后下降的波动变化趋势,夏秋季显著高于冬春季,且冬季均值略高于春季.在空间分布上,甲醛柱浓度自西向东、自北向南逐渐升高,高值区集中于陕西和甘肃东南部及青海西南部;低值区集中于宁夏、青海和甘肃的西北部;稳定性呈现出东部分散、西部集聚、差异显著的分布格局.影响甲醛柱浓度变化的因素包括自然和人为因素,自然因素中,甲醛柱浓度受地形影响显著,与风向、气温均呈现显著正相关;人为因素中,甲醛柱浓度与人口密度、地区生产总值、工业废气排放量及建筑房屋竣工面积均表现出正相关关系,与工业废气排放量的相关度最高.大气中甲醛分子与气溶胶粒子二者间呈显著正相关关系,这进一步说明甲醛浓度受到了诸多因素的综合影响,但气溶胶粒子、气温及工业废气的排放是主导因素.