Climate readiness of recovery plans for threatened Australian species

The rapidly changing climate is posing growing threats for all species, but particularly for those already considered threatened. We reviewed 100 recovery plans for Australian terrestrial threatened species (50 fauna and 50 flora plans) written from 1997 to 2017. We recorded the number of plans that acknowledged climate change as a threat and of these how many proposed specific actions to ameliorate the threat. We classified these actions along a continuum from passive or incremental to active or interventionist. Overall, just under 60% of the sampled recovery plans listed climate change as a current or potential threat to the threatened taxa, and the likelihood of this acknowledgment increased over time. A far smaller proportion of the plans, however, identified specific actions associated with ameliorating climate risk (22%) and even fewer (9%) recommended any interventionist action in response to a climate-change-associated threat. Our results point to a disconnect between the knowledge generated on climate-change-related risk and potential adaptation strategies and the extent to which this knowledge has been incorporated into an important instrument of conservation action.     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

Traditional agriculture in transition: examining the impacts of agricultural modernization on smallholder farming in Ghana under the new Green Revolution

Following the renewed effort at achieving a new green revolution for Africa, emphasis has been placed on modernizing smallholder agriculture through the deployment of improved inputs especially mechanized technologies. In Ghana, the government has in the last decade emphasized the provision of subsidized mechanized ploughing services to farmers alongside a rapidly growing private sector tractor service market. While mechanized technology adoption rates have increased rapidly, the deployment of these technologies has been without critical analysis of the impacts on production patterns and local agrarian systems. This paper examines the distributional impacts of agriculture mechanization on cropping patterns and farm sizes of smallholder farmers in northern Ghana using Geographic Information Systems (GIS) techniques, and semi-structured interviews with smallholder farmers (n=60). Specifically, comparative analysis of the field sizes and cropping patterns of participant farmers prior to and after the adoption of mechanized technologies was conducted. In-depth interviews were used to contextualize the experiences of smallholder farmers toward understanding how mechanization may be impacting traditional agriculture. Our findings reveal a mechanization paradox in which farm sizes are expanding, while cropping patterns are shifting away from traditional staple crops (pearl millet and sorghum bicolor) to market-oriented crops (maize, rice and groundnuts). This transition we argue, has adverse implications on the cultural dimension of food security, the organization of social life, and climate change adaptation. We recommend a retooling of the current agricultural policy focus to ensure context sensitivity for a more robust battle against food insecurity.     

Modeling of a sequencing batch reactor treating municipal wastewater using multi-layer perceptron and radial basis function artificial neural networks

A sequencing batch reactor was modeled using multi-layer perceptron and radial basis function artificial neural networks (MLPANN and RBFANN). Then, the effects of influent concentration (IC), filling time (FT), reaction time (RT), aeration intensity (AI), SRT and MLVSS concentration were examined on the effluent concentrations of TSS, TP, COD and NH₄⁺-N. The results showed that the optimal removal efficiencies would be obtained at FT of 1 h, RT of 6 h, aeration intensity of 0.88 m³/min and SRT of 30 days. In addition, COD and TSS removal efficiencies decreased and TP and NH₄⁺-N removal efficiencies did not change significantly with increases of influent concentration. The TSS, TP, COD and NH₄⁺-N removal efficiencies were 86%, 79%, 94% and 93%, respectively. The training procedures of all contaminants were highly collaborated for both RBFANN and MLPANN models. The results of training and testing data sets showed an almost perfect match between the experimental and the simulated effluent of TSS, TP, COD and NH₄⁺-N. The results indicated that with low experimental values of input data to train ANNs the MLPANN models compared to RBFANN models are more precise due to their higher coefficient of determination (R²) and lower root mean squared errors (RMSE) values.     

Using fuzzy set theory to address the uncertainty of susceptibility to drought

This paper presents the technical aspects of a new methodology for assessing the susceptibility of society to drought. The methodology consists of a combination of inference modelling and fuzzy logic applications. Four steps are followed: (1) model input variables are selected—these variables reflect the main factors influencing susceptibility in a social group, population or region, (2) fuzzification—the uncertainties of the input variables are made explicit by representing them as ‘fuzzy membership functions’, (3) inference modelling—the input variables are used to construct a model made up of linguistic rules, and (4) defuzzification—results from the model in linguistic form are translated into numerical form, also through the use of fuzzy membership functions. The disadvantages and advantages of this methodology became apparent when it was applied to the assessment of susceptibility from three disciplinary perspectives: Disadvantages include the difficulty in validating results and the subjectivity involved with specifying fuzzy membership functions and the rules of the inference model. Advantages of the methodology are its transparency, because all model assumptions have to be made explicit in the form of inference rules; its flexibility, in that informal and expert knowledge can be incorporated through ‘fuzzy membership functions’ and through the rules in the inference model; and its versatility, since numerical data can be converted to linguistic statements and vice versa through the procedures of ‘fuzzification’ and ‘defuzzification’.     

Long-Term Changes in the Fauna of Diurnal Lepidopterans (Lepidoptera,Diurna) in the Northern Taiga Subzone of the Western Russian Plain

In the diurnal lepidopteran fauna of the northern taiga subzone in the western Russian Plain, the species inhabiting primary biotopic complexes typical of this subzone currently account for slightly more than 60% of the total species richness and abundance. A large part of the fauna is represented by the species of more southern origin, whose expansion to the northern taiga was caused by anthropogenic transformation of landscapes between the 12th and 20th centuries and recent climate warming.     

外商投资的区位变动分析

文章利用1983—2000年的统计数据，通过比较分析方法，分析了我国外商投资区位的转移及其影响因素的变化，综合评价了我国中部5省、华东和西部的区位优势，提出了有利于吸引外商投资的建议。     

省以下生态转移支付制度环境保护激励效应

现有文献认为生态转移支付具有基本公共服务均等化与提升地方生态环境质量双目标,而目标的多样性会影响地方财政转移支付资金效果及目标的实现。文章基于环保支出和农林水支出的中介与调节效应,对生态转移支付的生态环境目标进行了理论分析,利用2010—2018年甘肃、贵州、湖北及河南四省的199个县的面板数据进行实证检验。实证研究表明:在样本期内,生态转移支付促进了地方生态环境质量的提升,中介效应和调节效应模型的结果表明,中国地方生态转移支付资金对辖区环境保护效果中,环境保护支出起到部分中介效应,农林水支出不仅调节了生态转移支付的地方环境保护支出效果,而且调节了环境保护支出对地方环境质量的影响。因此,由于地方政府具有环境治理信息优势,省以下制度目标更能体现辖区生态需求,省对县生态转移支付制度会有效促进地方生态环境质量的改善,环保激励效应较为明显。同时,县级地方政府应该逐步摆脱"先污染后治理"的路径依赖,逐步转向经济与环境"双目标协同发展"模式。为了协同生态转移支付的双目标,"自下而上参与式决策"可以作为环境治理的有益补充,通过地方政府多元化实践改善环境质量。     

喜凉作物生长期对全球变暖停滞响应的时空差异——以中国绿洲为例

基于中国绿洲喜凉作物（chimonophilous crop）分布区39个站点1960~2016年逐日平均气温资料,运用线性趋势法、反距离加权插值（IDW）、Morlet小波、Mann-Kendall检验等方法,研究中国绿洲喜凉作物气候生长期的时空变化对变暖停滞的响应.结果表明：①变暖停滞期,中国绿洲喜凉作物气候生长期起、止日及生长期日数以-0.2d/10a、0.33d/10a、0.53d/10a的趋势变化,较1960~2016年起始日提前趋势减缓1.01d/10a,终止日推迟减缓1.28d/10a,生长期日数延长减缓2.3d/10a,对变暖停滞有响应.②中国绿洲喜凉作物气候生长期起始日对变暖停滞响应的站点有44%,终止日和生长期日数均为49%,主要分布在南疆、柴达木盆地和河西绿洲,其中河西绿洲对变暖停滞响应最明显,南疆次之,柴达木最小,而北疆绿洲不存在滞缓现象,显然空间差异明显.③M-K检验显示,中国绿洲喜凉作物气候生长期起、止日及生长期日数分别在2001年、1990年和1997年发生突变,起始日晚于变暖停滞起始年份,终止日和生长期日数早于变暖停滞起始年,且分绿洲生长期日数突变年与变暖停滞起始年相接近.④Morlet小波得出变暖停滞期其变化稳定存在2.4~4.3a的震荡周期,表明未来几年中国绿洲喜凉作物气候生长期仍持续延长.