Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

外商投资的区位变动分析

文章利用1983—2000年的统计数据，通过比较分析方法，分析了我国外商投资区位的转移及其影响因素的变化，综合评价了我国中部5省、华东和西部的区位优势，提出了有利于吸引外商投资的建议。     

Magnetic resonance image findings of placental lake: report of two cases

Two cases with a large cystic mass within the placenta are reported. By ultrasonography, it was found that both women had a subchorionic hypoechoic lesion (11.0 × 4.8 × 4.0 cm and 6.6 × 3.7 × 2.2 cm, respectively) at 24 and 35 weeks of gestation, respectively. In both cases, turbulent blood flow generated by a pulsatile jet flow (pulse rate; 40 to 60 beats per minute) into the cystic lesion seen on real-time imaging and lesions being low intensity on T1-weighted and isointensity on T2-weighted magnetic resonance image suggested that they contained fresh maternal blood. In both cases, the sonolucency of the lesions did not change until cesarean deliveries of females, both of whom were small-for-gestational-age infants (1940 g at 37 weeks and 2195 g at 37 weeks, respectively). Biochemical analysis of the fluid in the cystic lesion sampled during the cesarean section in the latter case confirmed that the fluid had originated from the maternal blood. These lesions histologically corresponded to large avillous areas surrounded by normal villi. Thus, a huge placental lake was diagnosed in both cases. Copyright © 2005 John Wiley & Sons, Ltd.     

省以下生态转移支付制度环境保护激励效应

现有文献认为生态转移支付具有基本公共服务均等化与提升地方生态环境质量双目标,而目标的多样性会影响地方财政转移支付资金效果及目标的实现。文章基于环保支出和农林水支出的中介与调节效应,对生态转移支付的生态环境目标进行了理论分析,利用2010—2018年甘肃、贵州、湖北及河南四省的199个县的面板数据进行实证检验。实证研究表明:在样本期内,生态转移支付促进了地方生态环境质量的提升,中介效应和调节效应模型的结果表明,中国地方生态转移支付资金对辖区环境保护效果中,环境保护支出起到部分中介效应,农林水支出不仅调节了生态转移支付的地方环境保护支出效果,而且调节了环境保护支出对地方环境质量的影响。因此,由于地方政府具有环境治理信息优势,省以下制度目标更能体现辖区生态需求,省对县生态转移支付制度会有效促进地方生态环境质量的改善,环保激励效应较为明显。同时,县级地方政府应该逐步摆脱"先污染后治理"的路径依赖,逐步转向经济与环境"双目标协同发展"模式。为了协同生态转移支付的双目标,"自下而上参与式决策"可以作为环境治理的有益补充,通过地方政府多元化实践改善环境质量。     

基于稳定氢同位素的太原市大气单环芳烃来源

采集太原市城北和城南区域环境空气和5类污染源挥发性有机物样品,测定样品中典型单环芳烃稳定氢同位素（δD）组成,基于同位素质量平衡原理计算单环芳烃从源到环境空气受体的δD初始混合值,探讨单环芳烃来源.结果表明,柴油挥发源、溶剂挥发源、汽油挥发源（97^#）、汽油挥发源（95^#）、机动车尾气（97^#）、机动车尾气（95^#）和民用燃煤源中单环芳烃δD范围依次为：（-138.7‰~-115.5‰）、（-147.0‰~-121.0‰）、（-150.8‰~-117.6‰）、（-131.8‰~-113.8‰）、（-171.2‰~-120.0‰）、（-138.9‰~-102.7‰）和（-168.3‰~-142.3‰）,民用燃煤源中单环芳烃δD显著贫重氢同位素（D）组成,机动车尾气源与汽油挥发源中苯的δD相比显著贫D,可用于探索污染物转化过程;城北和城南环境空气中δD范围为（-131.7‰~-115.1‰）和（-131.9‰~-74.9‰）,δD初始混合值为-138.4‰和-173.9‰,体现了其来源差异.     

Advanced molecular-fingerprinting analysis of dissolved organic sulfur by electrospray ionization-Fourier transform ion cyclotron resonance mass spectrometry using optimal spray solvent

Molecular level characterization of dissolved organic sulfur (DOS) by electrospray ionization-Fourier transform ion cyclotron resonance mass spectrometry (ESI-FTICR MS) is necessary for further understanding of the role of DOS in the environment. Here, ESI spray solvent, a key parameter for ion production during ESI process, was investigated for its effect on the molecular characterization of DOS by ESI-FTICR MS. 100% MeOH as spray solvent was found for the first time to remarkably enhance the ionization efficiency of the majority of CHOS-molecules in NOM, which facilitated a total of 1473 CHOS-molecular formulas with one sulfur atom to be detected. The number of CHOS-molecular formulas obtained using 100%MeOH as spray solvent increased notably over 740 in comparison with those using 50% MeOH aqueous solution (731) or 50% ACN aqueous solution (653). Moreover, due to the enhancement of ionization efficiency of DOS during ESI processes, the tandem mass spectra of the NOM CHOS-molecules could be easily obtained using 100% MeOH as spray solvent, which were hardly obtained using 50% MeOH aqueous solution as spray solvent. The results of the tandem mass spectra suggested the first discovery of organosulfates or sulfonic acids in Suwannee River NOM sample. A simple method based on 100% MeOH as ESI spray solvent for advanced molecular characterization of DOS by ESI-FTICR MS was proposed and applied, and the results revealed more molecular information of DOS in sea DOM samples.     

厦门市冬季PM2.5污染情境识别及其与气象条件的关系

为研究厦门市冬季不同PM_2.5污染情境与气象条件和气团轨迹路径特征的关系,结合PM_2.5观测数据,使用AGAGE（Advanced Global Atmospheric Gases Experiment）统计方法识别2014—2018年冬季厦门市PM_2.5观测值、基线值和污染值情境,通过气象数据统计和气团后向轨迹聚类对不同PM_2.5污染情境下气象条件和气团轨迹路径特征进行探究.结果表明:①厦门市冬季不同PM_2.5污染情境下,ρ（PM_2.5）及PM_2.5污染值情境时长占比均呈波动中下降的趋势,具体表现为冬季PM_2.5观测值、污染值和基线值情境下,ρ（PM_2.5）平均值分别从2014年的42.2、90.7、16.4 μg/m3降至2018年的26.3、56.9、8.8 μg/m3,冬季PM_2.5污染值情境时长占比从2014年的10.2%降至2018年的3.0%.②冬季PM_2.5污染值情境下气象要素呈低风速、低气压、高温度、高相对湿度的特征.③冬季到达厦门市的气团轨迹路径中,局地路径由于大气条件稳定易累积形成PM_2.5污染;偏北路径和西北路径易从临近省份携带污染物输入导致PM_2.5污染,属于重要的外源污染输入路径;沿海路径和偏西路径均属于清洁路径,但沿海路径易在福建省北部与偏北路径重合形成污染输入,加强了偏北路径的污染物输送能力.研究显示,近年来厦门市冬季PM_2.5污染有明显减弱趋势,但不利的气象条件和外来污染输入仍会造成PM_2.5污染的发生.      

Concentrations and chemical compositions of PM10 during hazy and non-hazy days in Beijing

In order to study the concentrations of major components,characteristics and comparison in hazy and non-hazy days of PM_(10) in Beijing,aerosol samples were collected at urban site in Beijing from December 29,2014 to January 22,2015.Heavy metals like Zn,Pb,Mn,Cu,As,V,Cr and Cd were deeply studied considering their toxic effects on human being;nine water-soluble inorganic ions(SO_4~(2-),NO_3~-,NH_4~+,Na~+,K~+,Cl~-,Ca~(2+) and Mg~(2+)) and carbon fractions(OC and EC) were also analyzed.The concentrations of heavy metals were 1.03–1.98 times higher in hazy days than those in non-hazy days,mainly due to biomass burning and coal burning.The trends in total heavy metals concentrations were basically consistent with the trends in PM concentrations except for two obvious periods(12.29–12.30;1.14–1.15);but when air masses accumulated locally or around Beijing,trends in PM concentrations and heavy metals were opposite.The proportion for NO_3~-/SO_4~(2-) indicated that mobile sources such as automobiles were important reasons for haze in Beijing.Correlation between OC and EC during non-hazy days was strong(R~2= 0.95) but it was low(R~2= 0.67) during hazy days,and large variations for OC/EC values occurred in hazy days.The calculated mass concentration of SOC is 2.58 μg/m~3,which only accounted for 10.1% of the OC concentration.When air masses from the far north-west,they decreased PM concentration in Beijing and they were relatively clean;however,those from the near east,south-east and south of the mainland increased PM concentration and they were dirty.     

内饰材料发射率对密封舱室热防护效率的影响

目的探究密封舱室热防护效率与其内饰材料表面发射率的关系,分析内饰材料发射率对其表面温度、舱室内温度的影响规律。方法采用自行设计的小型密封舱室和加热测量装置,对内饰材料表面及舱室内温度进行测量。结果当内饰材料发射率为0.09时,内饰表面温度为141.2℃,舱室内平均温度仅为90.8℃;内饰材料发射率为0.91时,内饰表面温度为124.4℃,舱室内平均温度为109.1℃。结论试样表面温度随材料发射率的提高而降低,舱室内部空气平均温度随材料发射率的提高而升高;试样表面温度与舱室空气平均温度的温度差随材料发射率的提高而减小;同时,相同试样表面温度与舱室平均温度的温度差随加热温度的提高而增加。     

华北地区沙尘天气垂直气溶胶直接辐射强迫

利用CALIOP数据和SBDART（Santa Barbara DISORT Atmospheric Radiative Transfer）辐射传输模式研究了2013~2016年华北地区8d沙尘天气气溶胶及其直接辐射强迫垂直分布特征,分析了气溶胶垂直分布和光学特性对直接辐射强迫的影响.结果表明,气溶胶集中分布在地表及以上3km范围,其中纯净沙尘型和污染沙尘型气溶胶位于上层,污染大陆型气溶胶和烟雾位于下层.大气层顶、地表和大气层的日均气溶胶直接辐射强迫分别是-38.41~-88.44,-74.03~-225.86,9.06~137.42W/m².0~8km高度范围气溶胶直接辐射强迫是负值,且随着高度的增加绝对值逐渐减小.气溶胶垂直分布对大气层顶、地表和大气层的直接辐射强迫影响较小,但对直接辐射强迫垂直分布影响较大,由气溶胶廓线差异造成的同一高度层气溶胶直接辐射强迫最大差值能达到31.18W/m².气溶胶光学厚度和单次散射反照率对直接辐射强迫影响明显.消光能力相同时,吸收性气溶胶对短波太阳光的衰减作用大于散射性气溶胶,后向散射比例大的气溶胶大于后向散射比例小的气溶胶.