Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

Review: recent advances in biogas purifying technologies

Biomethane production through biogas upgrading is a promising renewable energy for some industries which could be part of the equilibrium needed with fossil fuels consumption to achieve a sustainable society. This paper presents a comprehensive list of biogas upgrading technologies focused on carbon dioxide removal as well as recent advances reported by researcher with wide expertise in this topic. Additionally, an extensive costs–performance comparison among the technologies studied is discussed. Among the different alternatives, chemical scrubbing stood out to achieve high biomethane purities while cryogenic technologies proved to be effective against methane losses. Regarding the different costs, water scrubbing and membrane separation seem to be the most affordable techniques.     

日本国土开发利用及对我国的启示

日本在战后经历了经济高速增长，工业化和城市化快速推进的发展历程，其间土地利用在结构、规模、价格、集约利用等方面发生了巨大变动。本文全面分析了二战之后，日本在经济高速增长、产业结构巨大变动、城市化迅速推进的发展过程中．农业用地、工业用地和城市用地在结构、规模、价格、集约利用程度等方面的特征；日本政府针对经济发展和土地利用的变动和影响。制订的一系列规划调整措施和政策法规体系。通过以上分析，探讨日本在有限的土地资源条件下实现经济高速增长的原因、途径和措施，以及对我国的启示。     

社会和谐与可持续发展

本文运用系统科学原理阐释了社会和谐的内涵,指出社会和谐须以人与自然和谐为基础,以人与人之间的平等、友爱和同合作为表征,其构建与实现应遵从人类社会的演化规律,依赖予在把握人类社会需求演绎、协同人与自然关系的基础上推动生产力的高效有序发展和自然资源、生态环境的可持续支持.进而从可持续发展角度,提出了人与自然和谐的"双剩余理论",以揭示其间的供瓣枧理和协同准则;推导出了社会收益分配的相对公平系数,以衡量人与人公平要求下的社会和谐.针对国情和战略目标要求,提出了以加强小城镇建设为轴心的城市、小城镇与农村人流、物流、财流和信息流合理聚散的"三元结构"发展模式,以促进我国和谐社会的建设和可持续发展战略的有序实践.     

村级水资源的管理与利用研究--来自南方四个村的案例分析

农村水资源及其相关设施的改革需要更多了解村和户层次上的现实状况和机制安排。以避免改革扭曲和失败。通过对湖北和广西共四个村的村委会、关键知情人及120个农户的调查。在村和农户两个层次上描述水资源及其相关设施的管理与利用，尤其是在干旱年份村和户所采取的策略。并深入分析了农村村级水资源管理与利用的制度安排与问题。得出的结论是。追求水利管理效率的市场化改革需要考虑干旱的威胁，要有基于风险的制度设计和法律保障。     

论土地持续利用

在世界上有两种可持续发展思路，一种是西方发达国家的重保护的可持续发展思路；一种是以发展为前提，保护自然资源的可持续发展思路。土地持续利用的思想是在可持续发展的进程中不断发展的。我国要保证土地持续利用，满足未来对食粮和建设的需求，应建立起同土地持续利用相适应的土地持续利用制度和土地持续利用机制     

中国近岸海域优势藻种吸收利用磷的过程

通过现场采样和室内培养实验分析了藻类植物的生长状况和细胞结合态磷对磷酸盐浓度的响应.现场调查结果发现,在水华区域藻类植物的细胞磷库分布特点与非水华区域明显不同.室内培养结果发现,中肋骨条藻和东海原甲藻的最大磷酸盐吸收速率为7.71,2.39μmol/（L·d）,最大比生长率分别为0.517,0.262d^-1,磷酸盐吸收同化率为5.9×10^-8,4.7×10^-7μmol/cell,前者具有更快的磷酸盐吸收能力,更高的比生长率和较低的磷酸盐吸收同化率.2种藻细胞内结合态磷通常占细胞总磷库的50%以上,是细胞磷库主要存在形式.中肋骨条藻种群可以通过藻细胞数量增长来吸收环境中的磷源,而东海原甲藻则会优先满足细胞自身的磷储存后进行细胞增殖.在高浓度磷环境中,东海原甲藻种群的细胞不同结合态磷的质量浓度会达到饱和.磷匮乏时,中肋骨条藻和东海原甲藻的细胞内结合态磷的质量浓度与零时刻相比分别降低了45%和66%,前者明显低于后者.培养过程中,中肋骨条藻单个细胞的细胞表面吸附态磷库（95%）比细胞内磷库（50%）的降低幅度更大,东海原甲藻则与之相反.     

内饰材料发射率对密封舱室热防护效率的影响

目的探究密封舱室热防护效率与其内饰材料表面发射率的关系,分析内饰材料发射率对其表面温度、舱室内温度的影响规律。方法采用自行设计的小型密封舱室和加热测量装置,对内饰材料表面及舱室内温度进行测量。结果当内饰材料发射率为0.09时,内饰表面温度为141.2℃,舱室内平均温度仅为90.8℃;内饰材料发射率为0.91时,内饰表面温度为124.4℃,舱室内平均温度为109.1℃。结论试样表面温度随材料发射率的提高而降低,舱室内部空气平均温度随材料发射率的提高而升高;试样表面温度与舱室空气平均温度的温度差随材料发射率的提高而减小;同时,相同试样表面温度与舱室平均温度的温度差随加热温度的提高而增加。     

Air Pollution and Heat Exposure Study in the Workplace in a Glass Manufacturing Unit in India

Air pollution in the workplace environment due to industrial operation have been found to cause serious occupational health hazard. Similarly, heat stress is still most neglected occupational hazard in the tropical and subtropical countries like India. The hot climate augments the heat exposure close to sources like furnaces. In this study an attempt is made to assess air pollution and heat exposure levels to workers in the workplace environment in glass manufacturing unit located in the State of Gujarat, India. Samples for workplace air quality were collected for SPM, SO₂, NO₂ and CO₂ at eight locations. Results of workplace air quality showed 8-hourly average concentrations of SPM: 165–9118 μg/m³, SO₂: 6–9 μg/m³ and NO₂: 5–42 μg/m³, which were below the threshold limit values of workplace environment. The level of CO₂ in workplace air of the plant was found to be in the range 827–2886 μg/m³, which was below TLV but much higher than the normal concentration for CO₂ in the air (585 mg/m³). Indoor heat exposure was studied near the furnace and at various locations in an industrial complex for glass manufacturing. The heat exposure parameters including the air temperature, the wet bulb temperature, and the globe parameters were measured. The Wet Bulb Globe Temperature (WBGT), an indicator of heat, exceeded ACGIH TLVs limits most of the time at all the locations in workplace areas. The recommended duration of work and rest have also been estimated.     

无剩余污泥的多级活性生化处理工艺

介绍了多级活性生化处理 (MSABP)这项新的废水处理技术的原理、技术特点及两个实例运用。这是此项技术在国内的首次运用 ,其最大的优点是无剩余污泥产生 ,不需要沉淀池