提高电捕焦油器安全生产运行的措施

简要叙述了电捕焦油器开工以来存在的问题,对电捕捕焦油器不能安全稳定运行的原因进行了分析,并采取改进措施。实践证明,改进工艺技术合理,方法可行,电捕焦油器运行效果达到指标要求。     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

论生态园林及其建设的基本原则

生态园林是城市绿地建设的新思维,也是生态学具体应用的实践.生态园林建设应遵循生态优先、物种多样性保护和重建、因地制宜、处理好种间关系、建立群落自维持机制、重视生态文化内涵等六要素.     

资源型城市可持续发展能力的演变与调控

作为特殊的经济区，资源型城市的衰落与振兴日益成为社会关注的热点。本文从分析资源型城市可持续发展能力入手，论述了资源型城市发展能力的成长阶段及演变特征，提出了资源城市可持续发展能力调控的模式和途径。     

大城市的城市化发展战略和途径研究--以南京市为例

城市化从本质上是一种经济社会结构变动过程，南京市作为长江三角洲的副中心城市和江苏省省会，需要认真研究在经济全球化背景下，如何加快推进城市化进程，发挥中心城市功能，促进城市现代化和可持续发展。城市化水平的提高、大城市中心功能的加强、较为明显的城乡二元结构是南京市城市化过程中的基本特征。南京城市化的发展遇到了前所未有的机遇，江苏省已经提出了大力规划建设以南京市为中心的都市圈，并在2001、2002连续2年扩张南京市区的范围，大大加强了南京市的综合实力。南京的城市化发展主要途径在于提升城市功能，奠定城市化的经济基础；以城市空间优化为支点，以基础设施建设为引导，提高城市现代化水平；增强中心城市辐射功能．带动城乡一体的发展。推进南京城市化的进程还必须要制定一些政策和措施傲保证，如加快户籍制度和土地制度的改革、加大投资融资的力度、制定各类切实可行的规划等等。     

On Index System and Quantitative Assessment of Eco-cities： A Case Study on Urban Agglomeration of the Yangtze Delta

Urban agglomeration of the Yangtze Delta （UAYD）, one of the most developed regions of China, has witnessed an increasing prevalence in building ecological cities when the ecological cities are pursued by many modem cities, and great achievements have been made in this regard. It is inevitable, however, that certain problems exist during the construction of ecological city, which include but not limited to non-harmonious development of urban complex ecosystem, and the difficulty in quantifying eco-city construction or incomplete quantification in assessing the construction of present and future eco-city. Based on the analysis on social-economic conditions and regional conditions of the UAYD, this paper attempts to set up an index system of eco-cities combining with local characteristics, and to adopt the indices of eco-city, urban harmony, and eco-city colligate to evaluate the ecological level, urban harmonious development and eco-city construction of cities within the UAYD. Results indicate that among 15 cities in UAYD, Suzhou City ranks the highest in terms of eco-city construction, whereas Nantong ranks relatively lower; sustainable eco-city construction is possible only when cities are developed in every respect of harmony.     

基于全过程治理的环境规制减排机制研究——来自长江经济带数据的实证检验

基于2007~2017年长江经济带11个省市的面板数据,利用中介效应模型探究全过程治理视域下政府主导型和市场激励型2类环境规制的减排机制.研究发现,政府主导型环境规制和市场激励型环境规制对SO₂排放均具有显著的抑制作用,其影响系数分别为-0.154和-0.209.其中政府主导型环境规制在源头防控、过程控制和末端治理的全过程都起到显著的减排效应,而市场激励型环境规制只通过末端治理实现减排.因此,尽管市场激励型环境规制具有低成本、高效率的优点,但考虑到源头防控和过程控制在生态环境保护中发挥的根本性作用,对于经济结构和经济发展方式较为落后的地区和行业,仍要重视以政府为主导的环境规制,通过因地制宜、合理科学地运用环境规制工具以实现高效的全过程污染治理.     

Coupling mechanism of activated carbon mixed with dust for flue gas desulfurization and denitrification

To clarify the effect of coking dust, sintering dust and fly ash on the activity of activated carbon for various industrial flue gas desulfurization and denitrification, the coupling mechanism of the mixed activated carbon and dust was investigated to provide theoretical reference for the stable operation. The results show that coking dust had 34% desulfurization efficiency and 10% denitrification efficiency; correspondingly, sintering dust and fly ash had no obvious desulfurization and denitrification activities. For the mixture of activated carbon and dust, the coking dust reduced the desulfurization and denitrification efficiencies by blocking the pores of activated carbon, and its inhibiting effect on activated carbon was larger than its own desulfurization and denitrification activity. The sintering dust also reduced the desulfurization efficiency on the activated carbon while enhancing the denitrification efficiency. Fly ash blocked the pores of activated carbon and reduced its reaction activity. The reaction activity of coking dust mainly came from the surface functional groups, similar to that of activated carbon. The reaction activity of sintering dust mainly came from the oxidative property of Fe₂O₃, which oxidized NO to NO₂ and promoted the fast selectively catalytic reduction (SCR) of NO to form N₂. Sintering dust was activated by the joint action of activated carbon, and both had a coupling function. Sintering dust enhanced the adsorption and oxidation of NO, and activated carbon further promoted the reduction of NO_x by NH₃; thus, the denitrification efficiency increased by 5%-7% on the activated carbon.     

内饰材料发射率对密封舱室热防护效率的影响

目的探究密封舱室热防护效率与其内饰材料表面发射率的关系,分析内饰材料发射率对其表面温度、舱室内温度的影响规律。方法采用自行设计的小型密封舱室和加热测量装置,对内饰材料表面及舱室内温度进行测量。结果当内饰材料发射率为0.09时,内饰表面温度为141.2℃,舱室内平均温度仅为90.8℃;内饰材料发射率为0.91时,内饰表面温度为124.4℃,舱室内平均温度为109.1℃。结论试样表面温度随材料发射率的提高而降低,舱室内部空气平均温度随材料发射率的提高而升高;试样表面温度与舱室空气平均温度的温度差随材料发射率的提高而减小;同时,相同试样表面温度与舱室平均温度的温度差随加热温度的提高而增加。