共查询到20条相似文献,搜索用时 46 毫秒
1.
采用全根挖掘法,运用分形理论对塔克拉玛干沙漠腹地阿克苏牛皮消、河西菊(Hexinia polydichotoma(Ostenf.)H.L.Yang)、白麻(Apocynum venetum L.)、沙拐枣(Cynanchum amplexicaule Hemsl)四种多年生野生植物根系的分支状况、分形特征与拓扑特征之间的关系进行了研究。研究发现:⑴四种植物根系分形特征较明显,分形维数大小与拓扑参数连接总数、外部连接数之间具有显著的相关关系;⑵根丰度与根系长度、平均连接长度之间具有显著的指数关系,分别可用以下方程表示:y1=2.7694e1.5496x,y2=0.036 9e2.026 7x(其中y1、y2分别为总根长、平均连接长度,R2分别为0.935 3、0.983 2)。因此,通过分形和拓扑理论对比分析了沙漠腹地4种野生植物根系的空间分形特征、资源占有能力与吸收率,有利于为沙漠腹的植物根系研究提供相关参数和一定的理论依据。 相似文献
2.
3.
针对蒸发器除霜效率低的问题,设计了两种喷嘴:喷嘴1的射流收缩段为圆弧收缩,引流段和扩散段呈圆柱状;喷嘴2的射流收缩段为直线收缩,引流段和扩散段呈圆锥状。采用理论计算和数值仿真两种方法获得了入口气压在0.3 s内从0.6 MPa快速降至0.1 MPa时的喷嘴射流参数。理论计算与数值仿真结果相近,而数值仿真更为具体地揭示出:喷嘴2的能量损失高于喷嘴1;喷嘴2的气压波动幅度大于喷嘴1;喷嘴2的出口质量平均速度优于喷嘴1。据此设计了综合2种喷嘴特点的喷嘴3,并对喷嘴3的圆弧半径作优化设计。结果表明:当该半径为11 mm时,喷嘴3的射流除霜能力优于喷嘴1和喷嘴2。本文所得结果可为除霜喷嘴的工程设计提供理论支撑。 相似文献
4.
5.
6.
7.
8.
《环境技术》2017,(6)
本研究通过单轴拉伸试验实现复合材料单搭胶结结构胶面剪切破坏测试,获得了结构的极限剪切强度,同时利用解析法和仿真模拟方法分析了胶层的剪切应力状态。研究结果表明:胶结件的破坏为胶层与搭接板间的脱粘破坏,无胶层内聚破坏;胶层横断面中部剪切应力值最低,胶结区端部产生应力集中,端部应力最大;胶层存在剪切应力的同时,也存在垂直于胶结面的拉应力,其破坏原因是剪应力和拉应力的综合影响结果;平均剪切应力计算结果显示:试验值、理论值和仿真结果分别为8.9 MPa、9.5 MPa和9.2 MPa,理论结果和仿真结果的应力变化趋势一致,理论解和仿真解与试验值的误差均在7%以内,理论分析和仿真模拟可实现胶结结构剪切应力的可靠预报。 相似文献
9.
10.
11.
12.
贸易对环境影响的初步研究 总被引:1,自引:0,他引:1
根据环境经济系统的双层结构建立了贸易对环境影响的概念模型 ,即贸易通过环境类、经济类物品和服务的输入输出 ,对环境子系统直接或通过经济子系统间接产生影响 ;对影响环境的贸易 (外部因素 )与环境成本内部化(内部因素 )问题 ,分别进行了分析 ;就贸易对环境影响的研究方法问题 ,运用局域均衡模型 ,为局域贸易环境问题的量化分析提供较为便捷、可靠的模式进行了初步探讨。 相似文献
13.
基于BP神经网络模型的城市土地集约利用中观评价研究 总被引:1,自引:0,他引:1
中观层次的城市土地集约利用评价是以城市功能区为研究对象,通过建立各功能区的评价单元,对城市土地的投入产出效益进行定量分析研究的过程。从土地利用、土地投入、土地产出三个方面构建评价指标体系,借助BP神经网络模型从中观层次对淮安市清河区城市土地进行集约利用评价。结果显示,清河区土地集约利用水平总体较高,仍需加强土地的投入产出效益。研究表明,BP神经网络模型是一种较客观的评价方法,中观评价则能更详细地了解城市内部各个区域的土地利用情况,为政府决策提供更好的依据。 相似文献
14.
This article offers a different perspective to the well known problems of water scarcity in the Middle East. It is argued that there are strong linkages between prevailing national ideologies and intraregional water disputes. Domestic political necessities and commitments often limit foreign policy choices open to countries with regard to the settlement of water disputes. This tends to exacerbate existing conflict. Reasons given include ideologically intertwined issues related to national security, including food security and national independence in conjunction with a deep socio-cultural commitment to a prospering agricultural sector. Any proposed solution to Middle East water disputes needs to take ideological-political factors into account in addition to the physical, social, cultural and economic aspects. 相似文献
15.
为了实现农业政策的生态化,即农业政策以环境保护为导向,减少农业政策对环境的影响,需要对农业政策进行环境影响评价。通过深入分析农业政策的环境影响评价对法治建设和生态文明建设的意义,认为在当前我国环境影响评价制度缺少相关政策层面环评的情况下,应当先对农业政策进行环评,通过确立政策环评范围、主体,对其进行阶段性设置,从而完善环评的法律体系,实现农业政策与环境保护的统一。 相似文献
16.
17.
本文分析了我国出口增长对环境(CO_2)的影响,结果表明:出口的增长并没有带来人均CO_2排放量的大量增加,相反,在一定程度上却减少了人均CO_2的排放。 相似文献
18.
Josef Maroušek 《Journal of Agricultural and Environmental Ethics》2013,26(3):679-689
Phytomass cultivation for energy use is increasingly popular in Europe for high profits guaranteed by subsidy. Although public interest in ecology is on an increasing level, direct combustion is still preferred even though scholars have been warning about formations of hazardous compounds for a long-time. However, the reduction of subsidies would negatively affect an already bad situation in Czech agriculture, since most farmers became fully dependent on subsidies due to quotas, restrictions, and other unequal business conditions in European Union. It was proved in a commercial scale that an alternative phytomass energy utilizing technology consisting of steam explosion and subsequent anaerobic fermentation may be run solely on the waste heat without any further addition of chemicals. Behavior analysis of present and future agriculture decision-makers showed that none of the farmers who visited the facility cared about ecological consequences. On the other hand, ost students from the Faculty of Agriculture and the Faculty of the Economy answered the questionnaire with higher environmental responsibility. We assume this is caused by high average age of farmers in Czech Republic who are more aware of the ongoing economical difficulties and perceive differently the risk of higher acquisition costs. 相似文献
19.
可靠性仿真分析通过施加温度、振动等载荷应力在产品的数字样机上,并分解到基本组件上,通过开展应力分析和应力损伤分析,得到产品的薄弱环节,并据此进行改进设计,以提高产品可靠性水平,并可预计出平均首发故障时间。讨论了如何利用可靠性仿真分析方法进行可靠性优化设计,克服了传统的"设计"与"可靠性"两张皮的现状,实现了可靠性与性能的一体化设计。 相似文献