Source identification and prediction of nitrogen and phosphorus pollution of Lake Taihu by an ensemble machine learning technique

● A machine learning model was used to identify lake nutrient pollution sources. ● XGBoost model showed the best performance for lake water quality prediction. ● Model feature size was reduced by screening the key features with the MIC method. ● TN and TP concentrations of Lake Taihu are mainly affected by endogenous sources. ● Next-month lake TN and TP concentrations were predicted accurately. Effective control of lake eutrophication necessitates a full understanding of the complicated nitrogen and phosphorus pollution sources, for which mathematical modeling is commonly adopted. In contrast to the conventional knowledge-based models that usually perform poorly due to insufficient knowledge of pollutant geochemical cycling, we employed an ensemble machine learning (ML) model to identify the key nitrogen and phosphorus sources of lakes. Six ML models were developed based on 13 years of historical data of Lake Taihu’s water quality, environmental input, and meteorological conditions, among which the XGBoost model stood out as the best model for total nitrogen (TN) and total phosphorus (TP) prediction. The results suggest that the lake TN is mainly affected by the endogenous load and inflow river water quality, while the lake TP is predominantly from endogenous sources. The prediction of the lake TN and TP concentration changes in response to these key feature variations suggests that endogenous source control is a highly desirable option for lake eutrophication control. Finally, one-month-ahead prediction of lake TN and TP concentrations (R² of 0.85 and 0.95, respectively) was achieved based on this model with sliding time window lengths of 9 and 6 months, respectively. Our work demonstrates the great potential of using ensemble ML models for lake pollution source tracking and prediction, which may provide valuable references for early warning and rational control of lake eutrophication.     

Effect of loading rate on shear strength parameters of mechanically and biologically treated waste

● Mechanical behavior of MBT waste affected by loading rate was investigated. ● Shear strength ratio of MBT waste increases with an increase in loading rate. ● Cohesion is inversely related to loading rate. ● Internal friction angles are positively related to loading rate. ● MBT waste from China shows smaller range of φ. Mechanical biological treatment (MBT) technology has attracted increasing attention because it can reduce the volume of waste produced. To deal with the current trend of increasing waste, MBT practices are being adopted to address waste generated in developing urban societies. In this study, a total of 20 specimens of consolidated undrained triaxial tests were conducted on waste obtained from the Hangzhou Tianziling landfill, China, to evaluate the effect of loading rate on the shear strength parameters of MBT waste. The MBT waste samples exhibited an evident strain-hardening behavior, and no peak was observed even when the axial strain exceeded 25%. Further, the shear strength increased with an increase in the loading rate; the effect of loading rate on shear strength under a low confining pressure was greater than that under a high confining pressure. Furthermore, the shear strength parameters of MBT waste were related to the loading rate. The relationship between the cohesion, internal friction angle, and logarithm of the loading rate could be fitted to a linear relationship, which was established in this study. Finally, the ranges of shear strength parameters cohesion c and effective cohesion c ´ were determined as 1.0–8.2 kPa and 2.1–14.9 kPa, respectively; the ranges of the internal friction angle φ and effective internal friction angle φ ´ were determined as 16.2°–29° and 19.8°–43.9°, respectively. These results could be used as a valuable reference for conducting stability analyses of MBT landfills.     

Spatial prediction of soil contamination based on machine learning: a review

● A review of machine learning (ML) for spatial prediction of soil contamination. ● ML have achieved significant breakthroughs for soil contamination prediction. ● A structured guideline for using ML in soil contamination is proposed. ● The guideline includes variable selection, model evaluation, and interpretation. Soil pollution levels can be quantified via sampling and experimental analysis; however, sampling is performed at discrete points with long distances owing to limited funding and human resources, and is insufficient to characterize the entire study area. Spatial prediction is required to comprehensively investigate potentially contaminated areas. Consequently, machine learning models that can simulate complex nonlinear relationships between a variety of environmental conditions and soil contamination have recently become popular tools for predicting soil pollution. The characteristics, advantages, and applications of machine learning models used to predict soil pollution are reviewed in this study. Satisfactory model performance generally requires the following: 1) selection of the most appropriate model with the required structure; 2) selection of appropriate independent variables related to pollutant sources and pathways to improve model interpretability; 3) improvement of model reliability through comprehensive model evaluation; and 4) integration of geostatistics with the machine learning model. With the enrichment of environmental data and development of algorithms, machine learning will become a powerful tool for predicting the spatial distribution and identifying sources of soil contamination in the future.     

Ozonation of aromatic monomer compounds in water: factors determining reaction outcomes

● p- CNB and IBP were selected, to explore factors determining ozonation outcomes. ● •OH contributed only 50 % to IBP removal, compared to the 90 % for p -CNB removal. ● IBP achieved fewer TOC removal and more by-product types and quantities. ● A longer ring-opening distance existed during the degradation of IBP. ● Multiple positions on both branches of IBP were attacked, consuming more oxidants. For aromatic monomer compounds (AMCs), ozonation outcomes were usually predicted by the substituents of the benzene ring based on the electron inductive effect. However, the predicted results were occasionally unreliable for complex substituents, and other factors caused concern. In this study, p-chloronitrobenzene (p-CNB) and ibuprofen (IBP) were selected for ozonation. According to the electron inductive theory, p-CNB should be less oxidizable, but the opposite was true. The higher rates of p-CNB were due to various sources of assistance. First, the hydroxyl radical (•OH) contributed 90 % to p-CNB removal at pH 7.0, while its contribution to IBP removal was 50 %. Other contributions came from molecular O₃ oxidation. Second, p-CNB achieved 40 % of the total organic carbon (TOC) removal and fewer by-product types and quantities, when compared to the results for IBP. Third, the oxidation of p-CNB started with hydroxyl substitution reactions on the benzene ring; then, the ring opened. However, IBP was initially oxidized mainly on the butane branched chain, with a chain-shortening process occurring before the ring opened. Finally, the degradation pathway of p-CNB was single and consumed fewer oxidants. However, both branches of IBP were attacked simultaneously, and three degradation pathways that relied on more oxidants were proposed. All of these factors were determinants of the rapid removal of p-CNB.     

Characterization and variation of dissolved organic matter in composting: a critical review

● Effect of composting approaches on dissolved organic matter (DOM). ● Effect of composting conditions on the properties of DOM. ● Character indexes of DOM varied in composting. ● The size, hydrophobicity, humification, and electron transfer capacity increased. ● The hydrophilicity, protein-like materials, and aliphatic components reduced. As the most motive organic fraction in composting, dissolved organic matter (DOM) can contribute to the transfer and dispersal of pollutants and facilitate the global carbon cycle in aquatic ecosystems. However, it is still unclear how composting approaches and conditions influence the properties of compost-derived DOM. Further details on the shift of DOM character indexes are required. In this study, the change in properties of compost-derived DOM at different composting approaches and the effect of composting conditions on the DOM characteristics are summarized. Thereafter, the change in DOM character indexes’ in composting was comprehensively reviewed. Along with composting, the elements and spectral properties (chromophoric DOM (CDOM) and fluorescent DOM (FDOM)) were altered, size and hydrophobicity increased, and aromatic-C and electron transfer capacity were promoted. Finally, some prospects to improve this study were put forward. This paper should facilitate the people who have an interest in tracing the fate of DOM in composting.     

The role of lipids in fermentative propionate production from the co-fermentation of lipid and food waste

● Lipid can promote PA production on a target from food waste. ● PA productivity reached 6.23 g/(L∙d) from co-fermentation of lipid and food waste. ● Lipid promoted the hydrolysis and utilization of protein in food waste. ● Prevotella , Veillonella and norank _f _Propioni bacteriaceae were enriched. ● Main pathway of PA production was the succinate pathway. Food waste (FW) is a promising renewable low-cost biomass substrate for enhancing the economic feasibility of fermentative propionate production. Although lipids, a common component of food waste, can be used as a carbon source to enhance the production of volatile fatty acids (VFAs) during co-fermentation, few studies have evaluated the potential for directional propionate production from the co-fermentation of lipids and FW. In this study, co-fermentation experiments were conducted using different combinations of lipids and FW for VFA production. The contributions of lipids and FW to propionate production, hydrolysis of substrates, and microbial composition during co-fermentation were evaluated. The results revealed that lipids shifted the fermentation type of FW from butyric to propionic acid fermentation. Based on the estimated propionate production kinetic parameters, the maximum propionate productivity increased significantly with an increase in lipid content, reaching 6.23 g propionate/(L∙d) at a lipid content of 50%. Propionate-producing bacteria Prevotella, Veillonella, and norank_f_Propionibacteriaceae were enriched in the presence of lipids, and the succinate pathway was identified as a prominent fermentation route for propionate production. Moreover, the Kyoto Encyclopedia of Genes and Genomes functional annotation revealed that the expression of functional genes associated with amino acid metabolism was enhanced by the presence of lipids. Collectively, these findings will contribute to gaining a better understanding of targeted propionate production from FW.     

Low-temperature caproate production,microbial diversity,and metabolic pathway in xylose anaerobic fermentation

● Converting xylose to caproate under a low temperature of 20 °C by MCF was verified. ● Final concentration of caproate from xylose in a batch reactor reached 1.6 g/L. ● Changing the substrate to ethanol did not notably increase the caproate production. ● Four genera, including Bifidobacterium , were revealed as caproate producers. ● The FAB pathway and incomplete RBO pathway were revealed via metagenomic analysis. Mixed culture fermentation (MCF) is challenged by the unqualified activity of enriched bacteria and unwanted methane dissolution under low temperatures. In this work, caproate production from xylose was investigated by MCF at a low temperature (20 °C). The results showed that a 9 d long hydraulic retention time (HRT) in a continuously stirred tank reactor was necessary for caproate production (~0.3 g/L, equal to 0.6 g COD/L) from xylose (10 g/L). The caproate concentration in the batch mode was further increased to 1.6 g/L. However, changing the substrate to ethanol did not promote caproate production, resulting in ~1.0 g/L after 45 d of operation. Four genera, Bifidobacterium, Caproiciproducens, Actinomyces, and Clostridium_sensu_stricto_12, were identified as the enriched caproate-producing bacteria. The enzymes in the fatty acid biosynthesis (FAB) pathway for caproate production were identified via metagenomic analysis. The enzymes for the conversion of (C_n+2)-2,3-Dehydroxyacyl-CoA to (C_n+2)-Acyl-CoA (i.e., EC 1.3.1.8 and EC 1.3.1.38) in the reverse β-oxidation (RBO) pathway were not identified. These results could extend the understanding of low-temperature caproate production.     

A critical review on thermodynamic mechanisms of membrane fouling in membrane-based water treatment process

● Fundamentals of membrane fouling are comprehensively reviewed. ● Contribution of thermodynamics on revealing membrane fouling mechanism is summarized. ● Quantitative approaches toward thermodynamic fouling mechanisms are deeply analyzed. ● Inspirations of thermodynamics for membrane fouling mitigation are briefly discussed. ● Research prospects on thermodynamics and membrane fouling are forecasted. Membrane technology is widely regarded as one of the most promising technologies for wastewater treatment and reclamation in the 21st century. However, membrane fouling significantly limits its applicability and productivity. In recent decades, research on the membrane fouling has been one of the hottest spots in the field of membrane technology. In particular, recent advances in thermodynamics have substantially widened people’s perspectives on the intrinsic mechanisms of membrane fouling. Formulation of fouling mitigation strategies and fabrication of anti-fouling membranes have both benefited substantially from those studies. In the present review, a summary of the recent results on the thermodynamic mechanisms associated with the critical adhesion and filtration processes during membrane fouling is provided. Firstly, the importance of thermodynamics in membrane fouling is comprehensively assessed. Secondly, the quantitative methods and general factors involved in thermodynamic fouling mechanisms are critically reviewed. Based on the aforementioned information, a brief discussion is presented on the potential applications of thermodynamic fouling mechanisms for membrane fouling control. Finally, prospects for further research on thermodynamic mechanisms underlying membrane fouling are presented. Overall, the present review offers comprehensive and in-depth information on the thermodynamic mechanisms associated with complex fouling behaviors, which will further facilitate research and development in membrane technology.     

Numerical simulation of benzene transport in shoreline groundwater affected by tides under different conditions

● An approach for assessing the transport of benzene on the beach was proposed. ● The behavior of benzene in the subsurface of the beach was impacted by tide. ● Tidal amplitude influenced the travel speed and the benzene biodegradation. ● Hydraulic conductivity had the impact on plume residence time and biodegradation. ● Plume dispersed and concentration decreased due to high longitudinal dispersivity. The release and transport of benzene in coastal aquifers were investigated in the present study. Numerical simulations were implemented using the SEAM3D, coupled with GMS, to study the behavior of benzene in the subsurface of tidally influenced beaches. The transport and fate of the benzene plume were simulated, considering advection, dispersion, sorption, biodegradation, and dissolution on the beach. Different tide amplitudes, aquifer characteristics, and pollutant release locations were studied. It was found that the tide amplitude, hydraulic conductivity, and longitudinal dispersivity were the primary factors affecting the fate and transport of benzene. The tidal amplitude influenced the transport speed and percentage of biodegradation of benzene plume in the beach. A high tidal range reduced the spreading area and enhanced the rate of benzene biodegradation. Hydraulic conductivity had an impact on plume residence time and the percentage of contaminant biodegradation. Lower hydraulic conductivity induced longer residence time in each beach portion and a higher percentage of biodegradation on the beach. The plume dispersed and the concentration decreased due to high longitudinal dispersivity. The results can be used to support future risk assessment and management for the shorelines impacted by spill and leaking accidents. Modeling the heterogeneous beach aquifer subjected to tides can also be further explored in the future study.     

Salinity exchange between seawater/brackish water and domestic wastewater through electrodialysis for potable water

● Present a general concept called “salinity exchange”. ● Salts transferred from seawater to treated wastewater until completely switch. ● Process demonstrated using a laboratory-scale electrodialysis system. ● High-quality desalinated water obtained at ~1 mL/min consuming < 1 kWh/m ³ energy. Two-thirds of the world’s population has limited access to potable water. As we continue to use up our freshwater resources, new and improved techniques for potable water production are warranted. Here, we present a general concept called “salinity exchange” that transfers salts from seawater or brackish water to treated wastewater until their salinity values approximately switch, thus producing wastewater with an increased salinity for discharge and desalinated seawater as the potable water source. We have demonstrated this process using electrodialysis. Salinity exchange has been successfully achieved between influents of different salinities under various operating conditions. Laboratory-scale salinity exchange electrodialysis (SEE) systems can produce high-quality desalinated water at ~1 mL/min with an energy consumption less than 1 kWh/m³. SEE has also been operated using real water, and the challenges of its implementation at a larger scale are evaluated.     

China’s carbon neutrality: an extensive and profound systemic reform

● China has pledged ambitious carbon peak and neutrality goals for mitigating global climate change. ● Major challenges to achieve carbon neutrality in China are summarized. ● The new opportunities along the pathway of China’s carbon neutrality are discussed from four aspects. ● Five policy suggestions for China are provided. China is the largest developing economy and carbon dioxide emitter in the world, the carbon neutrality goal of which will have a profound influence on the mitigation pathway of global climate change. The transition towards a carbon-neutral society is integrated into the construction of ecological civilization in China, and brings profound implications for China’s socioeconomic development. Here, we not only summarize the major challenges in achieving carbon neutrality in China, but also identify the four potential new opportunities: namely, the acceleration of technology innovations, narrowing regional disparity by reshaping the value of resources, transforming the industrial structure, and co-benefits of pollution and carbon mitigation. Finally, we provide five policy suggestions and highlight the importance of balancing economic growth and carbon mitigation, and the joint efforts among the government, the enterprises, and the residents.     

Differences in distributions,assembly mechanisms,and putative interactions of AOB and NOB at a large spatial scale

● Nitrifiers in WWTP were investigated at large spatial scale. ● AOB populations varied greatly but NOB populations were similar among cities. ● Drift dominated both AOB and NOB assembling processes. ● DO did not show a significant effect on NOB. ● NOB tended to cooperate with AOB and non-nitrifying microorganisms. Ammonia-oxidizing bacteria (AOB) and nitrite-oxidizing bacteria (NOB) play crucial roles in removing nitrogen from sewage in wastewater treatment plants (WWTPs) to protect water resources. However, the differences in ecological properties and putative interactions of AOB and NOB in WWTPs at a large spatial scale remain unclear. Hence, 132 activated sludge (AS) samples collected from 11 cities across China were studied by utilizing 16S rRNA gene sequencing technology. Results indicated that Nitrosomonas and Nitrosospira accounted for similar ratios of the AOB community and might play nearly equal roles in ammonia oxidation in AS. However, Nitrospira greatly outnumbered other NOB genera, with proportions varying from 94.7% to 99.9% of the NOB community in all WWTPs. Similar compositions and, hence, a low distance–decay turnover rate of NOB (0.035) across China were observed. This scenario might have partly resulted from the high proportions of homogenizing dispersal (~13%). Additionally, drift presented dominant roles in AOB and NOB assembling mechanisms (85.2% and 81.6% for AOB and NOB, respectively). The partial Mantel test illustrated that sludge retention time and temperature were the primary environmental factors affecting AOB and NOB communities. Network results showed that NOB played a leading role in maintaining module structures and node connections in AS. Moreover, most links between NOB and other microorganisms were positive, indicating that NOB were involved in complex symbioses with bacteria in AS.     

Surface-enhanced Raman spectroscopy for emerging contaminant analysis in drinking water

● Definition of emerging contaminants in drinking water is introduced. ● SERS and standard methods for emerging contaminant analysis are compared. ● Enhancement factor and accessibility of SERS hot spots are equally important. ● SERS sensors should be tailored according to emerging contaminant properties. ● Challenges to meet drinking water regulatory guidelines are discussed. Emerging contaminants (ECs) in drinking water pose threats to public health due to their environmental prevalence and potential toxicity. The occurrence of ECs in our drinking water supplies depends on their physicochemical properties, discharging rate, and susceptibility to removal by water treatment processes. Uncertain health effects of long-term exposure to ECs justify their regular monitoring in drinking water supplies. In this review article, we will summarize the current status and future opportunities of surface-enhanced Raman spectroscopy (SERS) for EC analysis in drinking water. Working principles of SERS are first introduced and a comparison of SERS and liquid chromatography-tandem mass spectrometry in terms of cost, time, sensitivity, and availability is made. Subsequently, we discuss the strategies for designing effective SERS sensors for EC analysis based on five categories—per- and polyfluoroalkyl substances, novel pesticides, pharmaceuticals, endocrine-disrupting chemicals, and microplastics. In addition to maximizing the intrinsic enhancement factors of SERS substrates, strategies to improve hot spot accessibilities to the targeting ECs are equally important. This is a review article focusing on SERS analysis of ECs in drinking water. The discussions are not only guided by numerous endeavors to advance SERS technology but also by the drinking water regulatory policy.     

Mechanistic insights into the selective photocatalytic degradation of dyes over TiO2/ZSM-11

● TiO₂/ZSM-11 was prepared by a facile solid state dispersion method. ● Mechanism for photocatalytic degradation of dyes was investigated. ● Both experimental and MD simulations were conducted. ● Chemisorption instead of electrostatic interaction played a critical role. Photocatalytic degradation is a promising way to eliminate dye contaminants. In this work, a series of TiO₂/ZSM-11 (TZ) nanocomposites were prepared using a facile solid state dispersion method. Methyl orange (MO), methylene blue (MB), and rhodamine B (RhB) were intentionally chosen as target substrates in the photocatalytic degradation reactions. Compared to pristine TiO₂, negative effect was observed on MO degradation while promoted kinetics were collected on MB and RhB over TZ composites. Moreover, a much higher photocatalytic rate was interestingly achieved on RhB than MB, which indicated that a new factor has to be included other than the widely accepted electrostatic interaction mechanism to fully understand the selective photodegradation reactions. Systematic characterizations showed that TiO₂ and ZSM-11 physically mixed and maintained both the whole framework and local structure without chemical interaction. The different trends observed in surface area and the photo-absorption ability of TZ composites with reaction performance further excluded both as the promotion mechanism. Instead, adsorption energies predicted by molecular dynamics simulations suggested that differences in the adsorption strength played a critical role. This work provided a deep mechanistic understanding of the selective photocatalytic degradation of dyes reactions, which helps to rationally design highly efficient photocatalysts.     

Hybrid energy harvesting systems for self-powered sustainable water purification by harnessing ambient energy

● Energy harvesters harness multiple energies for self-powered water purification. ● Hybrid energy harvesters enable continuous output under fluctuating conditions. ● Mechanical, thermal, and solar energies enable synergic harvesting. ● Perspectives of hybrid energy harvester-driven water treatment are proposed. The development of self-powered water purification technologies for decentralized applications is crucial for ensuring the provision of drinking water in resource-limited regions. The elimination of the dependence on external energy inputs and the attainment of self-powered status significantly expands the applicability of the treatment system in real-world scenarios. Hybrid energy harvesters, which convert multiple ambient energies simultaneously, show the potential to drive self-powered water purification facilities under fluctuating actual conditions. Here, we propose recent advancements in hybrid energy systems that simultaneously harvest various ambient energies (e.g., photo irradiation, flow kinetic, thermal, and vibration) to drive water purification processes. The mechanisms of various energy harvesters and point-of-use water purification treatments are first outlined. Then we summarize the hybrid energy harvesters that can drive water purification treatment. These hybrid energy harvesters are based on the mechanisms of mechanical and photovoltaic, mechanical and thermal, and thermal and photovoltaic effects. This review provides a comprehensive understanding of the potential for advancing beyond the current state-of-the-art of hybrid energy harvester-driven water treatment processes. Future endeavors should focus on improving catalyst efficiency and developing sustainable hybrid energy harvesters to drive self-powered treatments under unstable conditions (e.g., fluctuating temperatures and humidity).     

Property-performance relationship of core-shell structured black TiO2 photocatalyst for environmental remediation

● Properties and performance relationship of CSBT photocatalyst were investigated. ● Properties of CSBT were controlled by simply manipulating glycerol content. ● Performance was linked to semiconducting and physicochemical properties. ● CSBT (W:G ratio 9:1) had better performance with lower energy consumption. ● Phenols were reduced by 48.30% at a cost of $2.4127 per unit volume of effluent. Understanding the relationship between the properties and performance of black titanium dioxide with core-shell structure (CSBT) for environmental remediation is crucial for improving its prospects in practical applications. In this study, CSBT was synthesized using a glycerol-assisted sol-gel approach. The effect of different water-to-glycerol ratios (W:G = 1:0, 9:1, 2:1, and 1:1) on the semiconducting and physicochemical properties of CSBT was investigated. The effectiveness of CSBT in removing phenolic compounds (PHCs) from real agro-industrial wastewater was studied. The CSBT synthesized with a W:G ratio of 9:1 has optimized properties for enhanced removal of PHCs. It has a distinct core-shell structure and an appropriate amount of Ti³⁺ cations (11.18%), which play a crucial role in enhancing the performance of CSBT. When exposed to visible light, the CSBT performed better: 48.30% of PHCs were removed after 180 min, compared to only 21.95% for TiO₂ without core-shell structure. The CSBT consumed only 45.5235 kWh/m³ of electrical energy per order of magnitude and cost $2.4127 per unit volume of treated agro-industrial wastewater. Under the conditions tested, the CSBT demonstrated exceptional stability and reusability. The CSBT showed promising results in the treatment of phenols-containing agro-industrial wastewater.     

A critical review of the emerging research on the detection and assessment of microplastics pollution in the coastal,marine, and urban Bangladesh

● Coastal and marine regions are the most studied for microplastic pollution. ● Tourism is a major cause of microplastic pollution in coastal regions. ● Sediments contain larger microplastics while fish ingest smaller microplastics. ● Inland lakes, rivers, and freshwater fish are impacted by microplastic pollution. ● Microplastics are found in edible salts, however, presence is less in refined salt. The research on the extent and effects of microplastics pollution in the Global South is only getting started. Bangladesh is a South Asian country with one of the fastest growing economies in the world, however, such exponential economic growth has also increased the pollution threats to its natural and urban environment. In this paper, we reviewed the recent primary research on the assessment of the extent of microplastics pollution in Bangladesh. From the online databases, we developed a compilation of emerging research articles that detected and quantified microplastics in different coastal, marine, and urban environments in Bangladesh. Most of the studies focused on the coastal environment (e.g., beach sediment) and marine fish, while limited data were available for the urban environment. We also discussed the relationship of the type of anthropogenic activities with the observed microplastic pollution. The Cox’s Bazar sea beach in south-east Bangladesh experienced microplastics pollution due to tourism activities, while fishing and other anthropogenic activities led to microplastics pollution in the Bay of Bengal. While microplastics larger than 1 mm were prevalent in the beach sediments, smaller microplastics with size below 0.5 mm were prevalent in marine fish samples. Moreover, the differences in microplastic abundance, size, shape, color, and polymer type found were depended on the sampling sites and relevant anthropogenic activities. It is imperative to identify major sources of microplastics pollution in both natural and urban environment, determine potential environmental and human health effects, and develop mitigating and prevention strategies for reducing microplastics pollution.     

Responses of microbial interactions to elevated salinity in activated sludge microbial community

● Salinity led to the elevation of NAR over 99.72%. ● Elevated salinity resulted in a small, complex, and more competitive network. ● Various AOB or denitrifiers responded differently to elevated salinity. ● Putative keystone taxa were dynamic and less abundant among various networks. Biological treatment processes are critical for sewage purification, wherein microbial interactions are tightly associated with treatment performance. Previous studies have focused on assessing how environmental factors (such as salinity) affect the diversity and composition of the microbial community but ignore the connections among microorganisms. Here, we described the microbial interactions in response to elevated salinity in an activated sludge system by performing an association network analysis. It was found that higher salinity resulted in low microbial diversity, and small, complex, more competitive overall networks, leading to poor performance of the treatment process. Subnetworks of major phyla (Proteobacteria, Bacteroidetes, and Chloroflexi) and functional bacteria (such as AOB, NOB and denitrifiers) differed substantially under elevated salinity process. Compared with subnetworks of Nitrosomonadaceae, Nitrosomonas (AOB) made a greater contribution to nitrification under higher salinity (especially 3%) in the activated sludge system. Denitrifiers established more proportion of cooperative relationships with other bacteria to resist 3% salinity stress. Furthermore, identified keystone species playing crucial roles in maintaining process stability were dynamics and less abundant under salinity disturbance. Knowledge gleaned from this study deepened our understanding of microbial interaction in response to elevated salinity in activated sludge systems.     

Determination of growth kinetics of microorganisms linked with 1,4-dioxane degradation in a consortium based on two improved methods

● Evaluated three methods for determining the consortia’s growth kinetics. ● Conventional method is flawed since it relies on the total biomass concentration. ● Considering only selected bacterial taxa improved the accuracy. ● Considering oligotrophs and copiotrophs further improved the accuracy. The conventional method for determining growth kinetics of microbial consortia relies on the total biomass concentration. This may be inaccurate for substrates that are uncommon in nature and can only be degraded by a small portion of the microbial community. 1,4-dioxane, an emerging contaminant, is an example of such substrates. In this work, we evaluated an improved method for determining the growth kinetics of a 1,4-dioxane-degrading microbial consortium. In the improved method, we considered only bacterial taxa whose concentration increase correlated to 1,4-dioxane concentration decrease in duplicate microcosm tests. Using PEST (Parameter Estimation), a model-independent parameter estimator, the kinetic constants were estimated by fitting the Monod kinetics-based simulation results to the experimental data that consisted of the concentrations of 1,4-dioxane and the considered bacterial taxa. The estimated kinetic constants were evaluated by comparing the simulation results with experimental results from another set of microcosm tests. The evaluation was quantified by the sum of squared relative residual, which was four orders of magnitude lower for the improved method than the conventional method. By further dividing the considered bacterial taxa into oligotrophs and copiotrophs, the sum of squared relative residual further decreased.     

Catalytic reduction of water pollutants: knowledge gaps,lessons learned,and new opportunities

● Advances, challenges, and opportunities for catalytic water pollutant reduction. ● Cases of Pd-based catalysts for nitrate, chlorate, and perchlorate reduction. ● New functionalities developed by screening and design of catalytic metal sites. ● Facile catalyst preparation approaches for convenient catalyst optimization. ● Rational design and non-decorative effort are essential for future work. In this paper, we discuss the previous advances, current challenges, and future opportunities for the research of catalytic reduction of water pollutants. We present five case studies on the development of palladium-based catalysts for nitrate, chlorate, and perchlorate reduction with hydrogen gas under ambient conditions. We emphasize the realization of new functionalities through the screening and design of catalytic metal sites, including (i) platinum group metal (PGM) nanoparticles, (ii) the secondary metals for improving the reaction rate and product selectivity of nitrate reduction, (iii) oxygen-atom-transfer metal oxides for chlorate and perchlorate reduction, and (iv) ligand-enhanced coordination complexes for substantial activity enhancement. We also highlight the facile catalyst preparation approach that brought significant convenience to catalyst optimization. Based on our own studies, we then discuss directions of the catalyst research effort that are not immediately necessary or desirable, including (1) systematic study on the downstream aspects of under-developed catalysts, (2) random integration with hot concepts without a clear rationale, and (3) excessive and decorative experiments. We further address some general concerns regarding using H₂ and PGMs in the catalytic system. Finally, we recommend future catalyst development in both “fundamental” and “applied” aspects. The purpose of this perspective is to remove major misconceptions about reductive catalysis research and bring back significant innovations for both scientific advancements and engineering applications to benefit environmental protection.