Bioplastics Starch-Based with Additional Fiber and Nanoparticle: Characteristics and Biodegradation Performance: A Review

Journal of Polymers and the Environment - Plastics are widely used by the community, especially as food packaging. In general, plastic raw materials are polymers which have advantages including...     

Risk assessment of heavy metal(loid)s via Spinacia oleracea ingestion after sewage water irrigation practices in Vehari District

Environmental Science and Pollution Research - The use of sewage water as an irrigation source can be beneficial in agricultural practices, however, it may result in human health risks due to the...     

Frequency of PPAR-γ, FTO and ABCC8 genetic variation in Pakistani cardiovascular smokers

Environmental Science and Pollution Research - Smoking is considered as one of the major reasons behind genetic variations in cardiometabolic disorders. However, effect of nicotine via smoking on...     

Optimizing Cr(VI) adsorption on activated carbon produced from heavy oil fly ash

In order to explore the beneficial utilization of heavy oil fly ash (HOFA) generated in the power plants, the present study is intended to optimize the chromium(VI) [Cr(VI)] adsorption on activated carbon produced from HOFA. The raw HOFA obtained from a power plant was washed by nitric/hydrochloric acid and activated at 800 °C with a holding time of 60 min to produce fly ash activated carbon (FAC). Phosphoric acid was used as a chemical agent to improve the surface characteristics of the HOFA during the activation process. Batch adsorption experiments were employed to evaluate the effects of different parameters such as initial Cr(VI) concentration, pH, and FAC dose on the removal of Cr(VI) from aqueous solution. A total of 17 adsorption experimental runs were carried out employing the detailed conditions followed the response surface methodology based on the Box–Behnken design. The results indicate that developed FAC has the potential for removing Cr(VI) from wastewater. Under the test conditions, a maximum of 91.51 % Cr(VI) removal efficiency was achieved.     

Preparation and Fundamental Characterization of Cellulose Nanocrystal from Oil Palm Fronds Biomass

The objective of this work was to isolate cellulose nanocrystal (CNC) from oil palm fronds (Elaeis guineensis) and its subsequent characterization. Isolation involves sodium hydroxide/anthraquinone pulping with mechanical refining followed by total chlorine free bleaching (includes oxygen delignification, hydrogen peroxide oxidation and peracetic acid treatment) before acid hydrolysis. Bleaching significantly decreased kappa number and increased α-cellulose percentage of fibers as confirmed by Technical Association of the Pulp and Paper Industry standards. Transmission electron microscopy (TEM), X-ray diffraction, Fourier transform infrared spectroscopy and thermogravimetric analysis revealed that acid hydrolysis along with bleaching improved crystallinity index and thermal stability of the extracted nanocrystals. It was observed that CNC maintained its cellulose 1 polymorph despite hydrolysis treatment. Mean diameter as observed by TEM and average fiber aspect ratio of obtained CNC was 7.44 ± 0.17 nm and 16.53 ± 3.52, respectively making it suitable as a reinforcing material for nanocomposite.     

Property-performance relationship of core-shell structured black TiO2 photocatalyst for environmental remediation

● Properties and performance relationship of CSBT photocatalyst were investigated. ● Properties of CSBT were controlled by simply manipulating glycerol content. ● Performance was linked to semiconducting and physicochemical properties. ● CSBT (W:G ratio 9:1) had better performance with lower energy consumption. ● Phenols were reduced by 48.30% at a cost of $2.4127 per unit volume of effluent. Understanding the relationship between the properties and performance of black titanium dioxide with core-shell structure (CSBT) for environmental remediation is crucial for improving its prospects in practical applications. In this study, CSBT was synthesized using a glycerol-assisted sol-gel approach. The effect of different water-to-glycerol ratios (W:G = 1:0, 9:1, 2:1, and 1:1) on the semiconducting and physicochemical properties of CSBT was investigated. The effectiveness of CSBT in removing phenolic compounds (PHCs) from real agro-industrial wastewater was studied. The CSBT synthesized with a W:G ratio of 9:1 has optimized properties for enhanced removal of PHCs. It has a distinct core-shell structure and an appropriate amount of Ti³⁺ cations (11.18%), which play a crucial role in enhancing the performance of CSBT. When exposed to visible light, the CSBT performed better: 48.30% of PHCs were removed after 180 min, compared to only 21.95% for TiO₂ without core-shell structure. The CSBT consumed only 45.5235 kWh/m³ of electrical energy per order of magnitude and cost $2.4127 per unit volume of treated agro-industrial wastewater. Under the conditions tested, the CSBT demonstrated exceptional stability and reusability. The CSBT showed promising results in the treatment of phenols-containing agro-industrial wastewater.     

Effects of pesticides used in agriculture on the development of precocious puberty

The present study aims to evaluate the effects of pesticides on premature breast development. Forty-five girls (group 1) with premature breast development living in the Menderes region, where greenhouse cultivation is the main income, 16 girls (group 2) living in Izmir city with early puberty, and 33 girls (group 3) who had no signs of puberty were included in the study. Endosulphan 1, endosulphan 2, endosulphan sulphate, methoxychlor, vinclozolin, 4,4-dichlorodiphenyldichlorethylene (DDE), 4,-dichlorodiphenyltrichloroethane (DDT), and 2,4-DDT were evaluated in the serum and adipose tissues of the groups by using a gas chromatography-mass spectrometry method. With the exception of 4,4'-DDE, the pesticides studied were undetectable in the serum and adipose tissue samples. The levels of basal luteinizing hormone (LH), stimulated LH, follicle-stimulating hormone, and the long axis of the uterus and both ovaries were significantly different in the girls who had premature thelarche and detectable 4,4'-DDE levels compared to the girls who had premature thelarche and undetectable 4,4'-DDE levels in serum and adipose tissues. The presence and levels of pesticides in serum and adipose tissues were not related to precocious puberty (PP). The mechanisms that lead to PP may also result in obesity, and obesity may be the underlying cause for PP in this group.     

Biomass fuel burning and its implications: Deforestation and greenhouse gases emissions in Pakistan

Pakistan is facing problem of deforestation. Pakistan lost 14.7% of its forest habitat between 1990 and 2005 interval. This paper assesses the present forest wood consumption rate by 6000 brick kilns established in the country and its implications in terms of deforestation and emission of greenhouse gases. Information regarding consumption of forest wood by the brick kilns was collected during a manual survey of 180 brick kiln units conducted in eighteen provincial divisions of country. Considering annual emission contributions of three primary GHGs i.e., CO₂, CH₄ and N₂O, due to burning of forest wood in brick kiln units in Pakistan and using IPCC recommended GWP indices, the combined CO₂-equivalent has been estimated to be 533019 t y⁻¹.     

Politicisation of Humanitarian Aid and Its Consequences for Afghans

This paper outlines the implications of international approaches to humanitarian assistance in Afghanistan, focusing in particular on the period since the Taliban assumed power. It argues that international efforts to use conditionality on humanitarian assistance have proved ineffective in influencing the Taliban's policies, and have been implemented despite the negative impact on the welfare of the whole population. Efforts to adopt a principled approach to aid programming in this environment have also raised many ethical dilemmas which are likely to remain major challenges in that country and elsewhere.