Predicting heavy metals’ adsorption edges and adsorption isotherms on MnO2 with the parameters determined from Langmuir kinetics

Although surface complexation models have been widely used to describe the adsorption of heavy metals, few studies have verified the feasibility of modeling the adsorption kinetics,edge, and isotherm data with one p H-independent parameter. A close inspection of the derivation process of Langmuir isotherm revealed that the equilibrium constant derived from the Langmuir kinetic model, K S-kinetic, is theoretically equivalent to the adsorption constant in Langmuir isotherm, K S-Langmuir. The modified Langmuir kinetic model(MLK model) and modified Langmuir isotherm model(MLI model) incorporating p H factor were developed. The MLK model was employed to simulate the adsorption kinetics of Cu(II), Co(II), Cd(II), Zn(II) and Ni(II) on Mn O2 at p H 3.2 or 3.3 to get the values of K S-kinetic. The adsorption edges of heavy metals could be modeled with the modified metal partitioning model(MMP model), and the values of K S-Langmuir were obtained. The values of K S-kinetic and K S-Langmuir are very close to each other, validating that the constants obtained by these two methods are basically the same. The MMP model with K S-kinetic constants could predict the adsorption edges of heavy metals on Mn O2 very well at different adsorbent/adsorbate concentrations. Moreover, the adsorption isotherms of heavy metals on Mn O2 at various p H levels could be predicted reasonably well by the MLI model with the K S-kinetic constants.     

Adsorption–desorption behavior of atrazine on agricultural soils in China

Adsorption and desorption are important processes that affect atrazine transport,transformation,and bioavailability in soils.In this study,the adsorption–desorption characteristics of atrazine in three soils(laterite,paddy soil and alluvial soil) were evaluated using the batch equilibrium method.The results showed that the kinetics of atrazine in soils was completed in two steps:a"fast" adsorption and a "slow" adsorption and could be well described by pseudo-second-order model.In addition,the adsorption equilibrium isotherms were nonlinear and were well fitted by Freundlich and Langmuir models.It was found that the adsorption data on laterite,and paddy soil were better fitted by the Freundlich model;as for alluvial soil,the Langmuir model described it better.The maximum atrazine sorption capacities ranked as follows:paddy soil alluvial soil laterite.Results of thermodynamic calculations indicated that atrazine adsorption on three tested soils was spontaneous and endothermic.The desorption data showed that negative hysteresis occurred.Furthermore,lower solution pH value was conducive to the adsorption of atrazine in soils.The atrazine adsorption in these three tested soils was controlled by physical adsorption,including partition and surface adsorption.At lower equilibrium concentration,the atrazine adsorption process in soils was dominated by surface adsorption;while with the increase of equilibrium concentration,partition was predominant.     

Effect of Na+ impregnated activated carbon on the adsorption of NH4+-N from aqueous solution

Two kinds of activated carbons modified by Na+ impregnation after pre-treatments involving oxidation by nitric acid or acidification by hydrochloric acid (denoted as AC/N-Na and AC/HCl-Na, respectively), were used as adsorbents to remove NH4+-N. The surface features of samples were investigated by BET, SEM, XRD and FT-IR. The adsorption experiments were conducted in equilibrium and kinetic conditions. Influencing factors such as initial solution pH and initial concentration were investigated. A possible mechanism was proposed. Results showed that optimal NH4+-N removal efficiency was achieved at a neutral pH condition for the modified ACs. The Langmuir isotherm adsorption equation provided a better fit than other models for the equilibrium study. The adsorption kinetics followed both the pseudo second-order kinetics model and intra-particle kinetic model. Chemical surface analysis indicated that Na+ ions form ionic bonds with available surface functional groups created by pre-treatment, especially oxidation by nitric acid, thus increasing the removal efficiency of the modified ACs for NH4+-N. Na+-impregnated ACs had a higher removal capability in removing NH4+-N than unmodified AC, possibly resulting from higher numbers of surface functional groups and better intra-particle diffusion. The good fit of Langmuir isotherm adsorption to the data indicated the presence of monolayer NH4+-N adsorption on the active homogenous sites within the adsorbents. The applicability of pseudo second-order and intra-particle kinetic models revealed the complex nature of the adsorption mechanism. The intra-particle diffusion model revealed that the adsorption process consisted not only of surface adsorption but also intra-particle diffusion.     

Mesoporous carbon adsorbents from melamine-formaldehyde resin using nanocasting technique for CO2 adsorption

Mesoporous carbon adsorbents, having high nitrogen content, were synthesized via nanocasting technique with melamine–formaldehyde resin as precursor and mesoporous silica as template. A series of adsorbents were prepared by varying the carbonization temperature from 400 to 700°C. Adsorbents were characterized thoroughly by nitrogen sorption, X-ray diffraction(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM), thermogravimetric analysis(TGA), elemental(CHN) analysis, Fourier transform infrared(FTIR) spectroscopy and Boehm titration. Carbonization temperature controlled the properties of the synthesized adsorbents ranging from surface area to their nitrogen content, which play major role in their application as adsorbents for CO_2 capture.The nanostructure of these materials was confirmed by XRD and TEM. Their nitrogen content decreased with an increase in carbonization temperature while other properties like surface area, pore volume, thermal stability and surface basicity increased with the carbonization temperature. These materials were evaluated for CO_2 adsorption by fixed-bed column adsorption experiments. Adsorbent synthesized at 700°C was found to have the highest surface area and surface basicity along with maximum CO_2 adsorption capacity among the synthesized adsorbents. Breakthrough time and CO_2 equilibrium adsorption capacity were investigated from the breakthrough curves and were found to decrease with increase in adsorption temperature. Adsorption process for carbon adsorbent–CO_2 system was found to be reversible with stable adsorption capacity over four consecutive adsorption–desorption cycles. From three isotherm models used to analyze the equilibrium data, Temkin isotherm model presented a nearly perfect fit implying the heterogeneous adsorbent surface.     

Removal of tetracycline from aqueous solution by a Fe3O4 incorporated PAN electrospun nanofiber mat

Pollution of antibiotics, a type of emerging contaminant, has become an issue of concern,due to their overuse in human and veterinary application, persistence in environment and great potential risk to human and animal health even at trace level. In this work, a novel adsorbent, Fe3O4 incorporated polyacrylonitrile nanofiber mat(Fe-NFM), was successfully fabricated via electrospinning and solvothermal method, targeting to remove tetracycline(TC), a typical class of antibiotics, from aqueous solution. Field emission scanning electron microscopy and X-ray diffraction spectroscopy were used to characterize the surface morphology and crystal structure of the Fe-NFM, and demonstrated that Fe-NFM was composed of continuous, randomly distributed uniform nanofibers with surface coating of Fe3O4 nanoparticles. A series of adsorption experiments were carried out to evaluate the removal efficiency of TC by the Fe-NFM. The pseudo-second-order kinetics model fitted better with the experimental data. The highest adsorption capacity was observed at initial solution p H 4 while relative high adsorption performance was obtained from initial solution p H 4 to 10. The adsorption of TC on Fe-NFM was a combination effect of both electrostatic interaction and complexation between TC and Fe-NFM. Freundlich isotherm model could better describe the adsorption isotherm. The maximum adsorption capacity calculated from Langmuir isotherm model was 315.31 mg/g. Compared to conventional nanoparticle adsorbents which have difficulties in downstream separation, the novel nanofiber mat can be simply installed as a modular compartment and easily separated from the aqueous medium, promising its huge potential in drinking and wastewater treatment for micro-pollutant removal.     

A comparative study and evaluation of sulfamethoxazole adsorption onto organo-montmorillonites

Three organo-montmorillonites were prepared using surfactants, and their adsorption behaviors toward sulfamethoxazole（SMX） were investigated. The surfactants used were cetyltrimethyl ammonium bromide（CTMAB）, 3-（N,N-dimethylhexadecylammonio） propane sulfonate（HDAPS） and 1,3-bis（hexadecyldimethylammonio）-propane dibromide（BHDAP）. The properties of the organo-montmorillonites were characterized by X-ray diffraction, scanning electron microscopy and N2adsorption–desorption isotherm measurements. Results showed that the interlayer spacing of montmorillonite was increased and the surface area as well as the morphology were changed. Batch adsorption experiments showed that the surfactant loading amount had a great effect on the adsorption of SMX. The adsorption process was p H dependent and the maximum adsorption capacity was obtained at p H 3 for HDAPS-Mt, while CTMAB-Mt and BHDAP-Mt showed a high removal efficiency at 3–11. The adsorption capacity increased with the initial SMX concentration and contact time but decreased with increasing solution ionic strength.Kinetic data were best described by the pseudo second-order model. Equilibrium data were best represented by the Langmuir model, and the Freundlich constant（n） indicated a favorable adsorption process. The maximum adsorption capacity of SMX was 235.29 mg/g for CTMAB-Mt, 155.28 mg/g for HDAPS-Mt and 242.72 mg/g for BHDAP-Mt. Thermodynamic parameters were calculated to evaluate the spontaneity and endothermic or exothermic nature. The adsorption mechanism was found to be dominated by electrostatic interaction,while hydrophobic interaction played a secondary role.     

Adsorption–desorption behavior of atrazine on agricultural soils in China

Adsorptionanddesorptionareimportantprocessesthataffectatrazinetransport,transformation,andbioavailabilityinsoils.Inthisstudy,theadsorption–desorptioncharacteristicsofatrazinein three soils (laterite, paddy soil and alluvial soil) were evaluated using the batch equilibrium method. The results showed that the kinetics of atrazine in soils was completed in two steps: a “fast” adsorption and a “slow” adsorption and could be well described by pseudo-second-order model.In addition,the adsorption equilibrium isotherms were nonlinear and were well fitted by Freundlich and Langmuir models. It was found that the adsorption data on laterite, and paddy soil were better fitted by the Freundlich model;as for alluvial soil,the Langmuir model described it better. The maximum atrazine sorption capacities ranked as follows: paddy soil > alluvial soil > laterite. Results of thermodynamic calculations indicated that atrazine adsorption on three tested soils was spontaneous and endothermic. The desorption data showed that negative hysteresis occurred. Furthermore, lower solution pH value was conducive to the adsorptionofatrazineinsoils.Theatrazineadsorptioninthesethreetestedsoilswascontrolled by physical adsorption, including partition and surface adsorption. At lower equilibrium concentration, the atrazine adsorption process in soils was dominated by surface adsorption;while with the increase of equilibrium concentration, partition was predominant.     

Kinetic and thermodynamic studies on partitioning of polychlorinated biphenyls (PCBs) between aqueous solution and modeled individual soil particle grain sizes

The significance of soil mineral properties and secondary environmental conditions such as pH, temperature, ionic strength and time in the partitioning of eight selected polychlorinated biphenyl(PCB) congeners between aqueous solution and soil particles with different grain sizes was studied. The mineral properties of a model soil sample were determined, and Brunauer–Emmett–Teller(BET) adsorption–desorption isotherms were employed to observe the surface characteristics of the individual modeled soil particles.Batch adsorption experiments were conducted to determine the sorption of PCBs onto soil particles of different sizes. The results revealed that the sorption of PCB congeners onto the soil was dependent on the amount of soil organic matter, surface area, and pore size distribution of the various individual soil particles. Low pH favored the sorption of PCBs,with maximum sorption occurring between pH 6.5 and 7.5 with an equilibration period of 8 hr.Changes in the ionic strength were found to be less significant. Low temperature favored the sorption of PCBs onto the soil compared to high temperatures. Thermodynamic studies showed that the partition coefficient(K_d) decreased with increasing temperature, and negative and low values of ΔH° indicated an exothermic physisorption process. The data generated is critical and will help in further understanding remediation and cleanup strategies for polluted water.     

Removal of arsenate with hydrous ferric oxide coprecipitation：Effect of humic acid

Insights from the adverse effect of humic acid(HA) on arsenate removal with hydrous ferric oxide(HFO) coprecipitation can further our understanding of the fate of As(V) in water treatment process. The motivation of our study is to explore the competitive adsorption mechanisms of humic acid and As(V) on HFO on the molecular scale. Multiple complementary techniques were used including macroscopic adsorption experiments, surface enhanced Raman scattering(SERS), extended X-ray absorption fine structure(EXAFS) spectroscopy, flow-cell attenuated total reflectance Fourier transform infrared(ATR-FTIR) measurement, and charge distribution multisite complexation(CDMUSIC) modeling. The As(V) removal efficiency was reduced from over 95% to about 10% with the increasing HA concentration to 25 times of As(V) mass concentration. The SERS analysis excluded the HA-As(V) complex formation. The EXAFS results indicate that As(V) formed bidentate binuclear surface complexes in the presence of HA as evidenced by an As-Fe distance of 3.26–3.31 ?. The in situ ATR-FTIR measurements show that As(V) replaces surface hydroxyl groups and forms innersphere complex. High concentrations of HA may physically block the surface sites and inhibit the As(V) access. The adsorption of As(V) and HA decreased the point of zero charge of HFO from 7.8 to 5.8 and 6.3, respectively. The CD-MUSIC model described the zeta potential curves and adsorption edges of As(V) and HA reasonably well.     

Three-dimensional eutrophication model and application to Taihu Lake, China

Taihu Lake, the largest freshwater shallow lake in eastern China, has suffered from severe eutrophication over the past two decades. This research developed a three-dimensional eutrophication model to investigate the eutrophication dynamics. The model fully coupled the biological processes and hydrodynamics, and also took into account the effects of sediment release and the external loads from the tributaries. After sensitivity analyses, the key parameters were defined and then calibrated by the field observation data. The calibrated model was applied to study the seasonal primary productions and its regional differences. The comparisons between model results and field data in year 2000 indicated that the model is able to simulate the eutrophication dynamics in Taihu Lake with a reasonable accuracy. From the simulation experiments, it was found that the meteorological forcing have significant influences on the temporal variations of the eutrophication dynamics. The wind-induced circulation and sediment distribution play an important role in the spatial distribution of the algae blooms.     

Surface reaction of Bacillus cereus biomass and its biosorption for lead and copper ions

In this study, the surface chemical functional groups of Bacillus cereus biomass were identified by Fourier transform infrared （FTIR） analytical technique. It had been shown that the B. cereus cells mainly contained carboxyl, hydroxyl, phosphate, amino and amide functional groups. The potentiometric titration was conducted to explain the surface acid-base properties of aqueous B. cereus biomass. The computer program FITEQL 4.0 was used to perform the model calculations. The optimization results indicated that three sitesthree pKas model, which assumed the cell surface to have three distinct types of surface organic functional groups based on the IR analysis results, simulated the experimental results very well. Moreover, batch adsorption experiments were performed to investigate biosorption behavior of Cu（Ⅱ） and Pb（Ⅱ） ions onto the biomass. Obviously, the adsorption equilibrium data for the two ions were reasonably described by typical Langmuir isotherm.     

Shellac-coated iron oxide nanoparticles for removal of cadmium(II) ions from aqueous solution

This study describes a new effective adsorbent for cadmium removal from aqueous solution synthesized by coating a shellac layer, a natural biodegradable and renewable resin with abundant hydroxyl and carboxylic groups, on the surface of iron oxide magnetic nanoparticles. Transmission Electron Microscopy (TEM) imaging showed shellac-coated magnetic nanoparticle (SCMN) adsorbents had a core-shell structure with a core of 20 nm and shell of 5 nm. Fourier Transform Infrared Spectroscopic analysis suggested the occurrence of reaction between carboxyl groups on the SCMN adsorbent surface and cadmium ions in aqueous solution. Kinetic data were well described by pseudo second-order model and adsorption isotherms were fitted with both Langmuir and Freundlich models with maximum adsorption capacity of 18.80 mg/g. SCMN adsorbents provided a favorable adsorption capacity under high salinity conditions, and cadmium could easily be desorbed using mild organic acid solutions at low concentration.     

Adsorption of naphthalene onto a high-surface-area carbon from waste ion exchange resin

A high-surface-area carbon (KC-1) was prepared from waste polystyrene-based ion exchange resin by KOH activation and used for naphthalene adsorption. The carbon exhibited a good hydrophobic nature with developed porous structure, favoring the adsorption of organic compounds. The Brunauer-Emmett-Teller surface area and total pore volume of KC-1 were 3442.2 and 1.68 cm 3 /g, respectively, which can be compared with those of KOH-activated carbons prepared from other precursors. Batch experiments were carried out to investigate the adsorption of naphthalene onto KC-1. The equilibrium data were analyzed by the Langmuir, Freundlich, and Polanyi- Manes isotherms and agreed with the Polanyi-Manes Model. The adsorption of naphthalene depended greatly on the porosity of the carbon, and the dispersive interactions between naphthalene and carbon could be relatively weak. The pH variation in aqueous solution had little effect on the adsorption process. The equilibrium time for 0.04 g/L of carbon dose was around 5 hr. Different models were used to evaluate the kinetic data and the pseudo second-order model was suitable to describe the kinetic process of naphthalene adsorption onto KC-1. Regeneration of spent carbon could be carried out effectively by alcohol treatment. The results indicated that KC-1 was a promising adsorbent for the removal of polycyclic aromatic hydrocarbons from aqueous solutions.     

Particle concentration effect in adsorption/desorption of Zn(Ⅱ) on anatase type nano TiO_2

Adsorption/desorption in a new Zn(Ⅱ)-TiO_2 adsorption system was investigated at different particle concentrations(C_p).TEM,SEM and XRD analyses revealed that the TiO_2 particles were an aggregation of nano-sized(approximately 10 nm)pure anatase-type TiO_2. Adsorption experiments were carried out with particle concentrations of 100,400 and 1000 mg/L,and their adsorption isotherms were found to decline successively,showing an obvious C_p effect.Desorption experiments indicated that adsorption in this system was irreversible,and the irreversibility increased with increasing C_p.These phenomena could be explained by the MEA(metastable equilibrium adsorption)theory and the C_p effect could be modeled well with an MEA-Freundlich-type C_p effect isotherm equation. This study may help understand environmental behavior of contaminants on ultrafine natural particles.     

Metals in sediment/pore water in Chaohu Lake: Distribution, trends and flux

Nine metals, Cd, Cu, Ni, Pb, As, Cr, Zn, Fe, and Mn in sediment and pore water from 57 sampling sites in Chaohu Lake (Anhui Province, China) were analyzed for spatial distribution, temporal trends and diffuse flux in 2010. Metals in the surface sediment were generally the highest in the western lake center and Nanfei-Dianbu River estuary, with another higher area of As, Fe, and Mn occurring in the Qiyang River estuary. Metal contamination assessment using the New York sediment screening criteria showed that the sediment was severely contaminated in 44% of the area with Mn, 20% with Zn, 16% with Fe, 14% with As, and 6% with Cr and Ni. An increasing trend of toxic metals (Cd, Cu, Ni, Pb, As, Cr, Zn) and Mn with depth was shown in the western lake. Compared with metal content data from the sediment survey conducted in 1980s, the metal content of surface sediment in 2010 was 2.0 times that in the 1980s for Cr, Cu, Zn, and As in the western lake, and less than 1.5 times higher for most of the metals in the eastern lake. Among the metals, only Mn and As had a widespread positive diffuse flux from the pore water to overlying water across the whole lake. The estimated flux in the whole lake was on average 3.36 mg/(m². day) for Mn and 0.08 mg/(m². day) for As, which indicated a daily increase of 0.93 μg/L for Mn and 0.02 μg/L for As in surface water. The increasing concentration of metals in the sediment and the flux of metals from pore water to overlying water by diffusion and other physical processes should not be ignored for drinking-water sources.     

Cadmium sorption by sodium and thiourea-modified zeolite-rich tuffs

In the present investigation, two zeolite-rich tuffs from Guaymas and El Cajon(State of Sonora), which were conditioned with a sodium chloride solution and subsequently modified with a thiourea solution, were chosen to evaluate the removal of Cd from aqueous systems. The zeolitic materials were characterized by scanning electron microscopy and X-ray diffraction. The surface area was also determined. The experiments were performed in a batch system, and the influences of p H, contact time between phases, and the concentration of Cd in the solution on the adsorption by sodium or thiourea-modified zeolite-rich tuff were investigated. It was found that the efficiency of Cd ion removal from aqueous solutions is influenced by the p H of the aqueous systems. The Cd adsorption kinetic data were well fitted to a pseudo-second-order model in all cases. The Langmuir and Langmuir–Freundlich isotherms adequately described the Cd sorption behavior by the zeolite from El Cajon pretreated with Na Cl and the zeolite from Guaymas modified with thiourea, respectively.     

Removal of tetracycline from aqueous solution by a Fe3O4 incorporated PAN electrospun nanofiber mat

Pollution of antibiotics, a type of emerging contaminant, has become an issue of concern, due to their overuse in human and veterinary application, persistence in environment and great potential risk to human and animal health even at trace level. In this work, a novel adsorbent, Fe₃O₄ incorporated polyacrylonitrile nanofiber mat (Fe-NFM), was successfully fabricated via electrospinning and solvothermal method, targeting to remove tetracycline (TC), a typical class of antibiotics, from aqueous solution. Field emission scanning electron microscopy and X-ray diffraction spectroscopy were used to characterize the surface morphology and crystal structure of the Fe-NFM, and demonstrated that Fe-NFM was composed of continuous, randomly distributed uniform nanofibers with surface coating of Fe₃O₄ nanoparticles. A series of adsorption experiments were carried out to evaluate the removal efficiency of TC by the Fe-NFM. The pseudo-second-order kinetics model fitted better with the experimental data. The highest adsorption capacity was observed at initial solution pH 4 while relative high adsorption performance was obtained from initial solution pH 4 to 10. The adsorption of TC on Fe-NFM was a combination effect of both electrostatic interaction and complexation between TC and Fe-NFM. Freundlich isotherm model could better describe the adsorption isotherm. The maximum adsorption capacity calculated from Langmuir isotherm model was 315.31 mg/g. Compared to conventional nanoparticle adsorbents which have difficulties in downstream separation, the novel nanofiber mat can be simply installed as a modular compartment and easily separated from the aqueous medium, promising its huge potential in drinking and wastewater treatment for micro-pollutant removal.     

Carboxymethyl cellulose thiol-imprinted polymers:Synthesis,characterization and selective Hg(Ⅱ) adsorption

Sulfur containing ion imprinted polymers(S-IIPs) were applied for the uptake of Hg(Ⅱ) from aqueous solution. Cysteamine which was used as the ligand for Hg(Ⅱ) complexation, was grafted along the epichlorohydrin crosslinked carboxylated carboxymethyl cellulose polymer chain through an amide reaction. The adsorption ability of S-IIPs towards Hg(Ⅱ)was investigated by kinetic and isotherm models, which, corresponding, showed that the adsorption process followed a pseudo-second-order, fitted well with the Langmuir isotherm with a maximum adsorption capacity of 80 mg/g. Moreover, thermodynamic studies indicated an endothermic and spontaneous reaction with the tendency of an enhanced randomness at the surface of the S-IIPs with temperature increases. S-IIPs indicated a high degree of selectivity towards Hg(Ⅱ) in the presence of Cu~(2+), Zn~(2+), Co~(2+), Pb~(2+)and Cd~(2+).Furthermore, the efficiency of S-IIPs was also evaluated against real samples showing86.78%, 91.88%, and 99.10% recovery for Hg(Ⅱ) wastewater, ground water and tap water,respectively. In this study, the adsorbent was successfully regenerated for five cycles, which allows for their reuse without significant loss of initial adsorption capability.     

Experimental investigation of the e ect of flow turbulence and sediment transport patterns on the adsorption of cadmium ions onto sediment particles

The mechanism of flow turbulence,sediment supply conditions,and sediment transport patterns that affect the adsorption of cadmiumions onto sediment particles in natural waters are experimentally simulated and studied both in batch reactors and in a turbulencesimulation tank.By changing the agitation conditions,the sediment transport in batch reactors can be categorized into bottom sediment-dominated sediment and suspended sediment-dominated sediment.It is found that the adsorption rate of bottom sediment is much lessthan that of suspended sediment,but the sediment transport pattern does not affect the final(equilibrium)concentration of dissolvedcadmium.This result indicates that the parameters of an adsorption isotherm are the same regardless of the sediment transport pattern.Inthe turbulence simulation tank,the turbulence is generated by harmonic grid-stirred motions,and the turbulence intensity is quantifiedin terms of eddy diffusivity,which is equal to 9.84F(F is the harmonic vibration frequency)and is comparable to natural surfacewater conditions.When the turbulence intensity of flow is low and sediment particles stay as bottom sediment,the adsorption rateis significantly low,and the adsorption quantity compared with that of suspended sediment is negligible in the 6 h duration of theexperiment.This result greatly favors the simplification of the numerical modeling of heavy metal pollutant transformation in naturalrivers.When the turbulence intensity is high but bottom sediment persists,the rate and extent of descent of the dissolved cadmiumconcentration in the tank noticeably increase,and the time that is required to reach adsorption equilibrium also increases considerablydue to the continuous exchange that occurs between the suspended sediment and the bottom sediment.A comparison of the results ofthe experiments in the batch reactor and those in the turbulence simulation tank reveals that the adsorption ability of the sediment,andin particular the adsorption rate,is greatly over-estimated in the batch reactor.     

Preparation of Fe–Co based MOF-74 and its effective adsorption of arsenic from aqueous solution

To obtain a cost-effective adsorbent for the removal of arsenic in water,a novel nanostructured Fe–Co based metal organic framework(MOF-74)adsorbent was successfully prepared via a simple solvothermal method.The adsorption experiments showed that the optimal molar ratio of Fe/Co in the adsorbent was 2:1.The Fe_2Co_1MOF-74 was characterized by various techniques and the results showed that the nanoparticle diameter ranged from60 to 80 nm and the specific surface area was 147.82 m~2/g.The isotherm and kinetic parameters of arsenic removal on Fe_2Co_1MOF-74 were well-fitted by the Langmuir and pseudo-second-order models.The maximum adsorption capacities toward As(III)and As(V)were 266.52 and 292.29 mg/g,respectively.The presence of sulfate,carbonate and humic acid had no obvious effect on arsenic adsorption.However,coexisting phosphate significantly hindered the removal of arsenic,especially at high concentrations(10 mmol/L).Electrostatic interaction and hydroxyl and metal–oxygen groups played important roles in the adsorption of arsenic.Furthermore,the prepared adsorbent had stable adsorption ability after regeneration and when used in a real-water matrix.The excellent adsorption performance of Fe_2Co_1MOF-74 material makes it a potentially promising adsorbent for the removal of arsenic.