Examining RULA’s Postural Scoring System With Selected Physiological and Psychophysiological Measures

The Rapid Upper Limb Assessment (RULA) survey is a posture-sampling tool used specifically to examine the level of risk associated with upper limb disorders of individual workers. This paper examines the relationship between RULA’s postural scoring system and measures of surface electromyography (EMG), self-reports of discomfort, and job attitude questionnaires. Twenty participants each performed a 30-min typing task on a computer in 3 working postures based on RULA’s scoring system. A statistically significant difference was found only in perceived discomfort. The perceived discomfort results demonstrated that RULA was able to identify “high risk” postures. The next question we need to ask is, does perceived discomfort result in tissue damage, or does tissue damage yield discomfort?     

Effects of carrying handles,postures, materials and distances on carrying capability

This study recruited 14 industrial workers to examine the effects of carrying handles, postures, materials and distances on maximum acceptable weights of carrying (MAWC), and resulting heart rate and body rating of perceived exertion (RPE) for a 20 min intensive carrying task. This study showed that MAWC of carrying with bar handles, carrying with hands-and-body posture, solid materials and 4?m distance were significantly higher than that of carrying with groove handles, carrying with hands posture, liquid materials and 8?m distance, respectively. The resulting heart rates while carrying MAWCs of groove handles, hands-and-body carrying posture, solid materials and 4?m distance were lower than the resulting heart rates while carrying MAWCs of bar handles, hands carrying posture, liquid materials and 8?m distance, respectively. Most pair levels of independent variables resulted in similar body's RPEs except for the pair levels of carrying distance.     

A comparison of three observational techniques for assessing postural loads in industry.

This study aims to compare 3 observational techniques for assessing postural load, namely, OWAS, RULA, and REBA. The comparison was based on the evaluation results generated by the classification techniques using 301 working postures. All postures were sampled from the iron and steel, electronics, automotive, and chemical industries, and a general hospital. While only about 21% of the 301 postures were classified at the action category/level 3 or 4 by both OWAS and REBA, about 56% of the postures were classified into action level 3 or 4 by RULA. The inter-method reliability for postural load category between OWAS and RULA was just 29.2%, and the reliability between RULA and REBA was 48.2%. These results showed that compared to RULA, OWAS, and REBA generally underestimated postural loads for the analyzed postures, irrespective of industry, work type, and whether or not the body postures were in a balanced state.     

Prediction of Musculoskeletal Discomfort in a Pick and Place Task (A pilot study)

A pilot study was conducted regarding the effects of working posture, handling frequency, and task duration on musculoskeletal discomfort. Participants rated their discomfort perceived while performing a repetitive task at 8 different combinations of manipulations. Pauses between the work periods lasted 15 min. Discomfort was rated according to Borg’s category-ratio scale CR-10 and postures were recorded by an optoelectronic movement registration system. From linear multiple regression analysis equations for predicting discomfort at various body regions were obtained. Coefficients of determination especially point to trunk inclination and handling frequency as major determinants of musculoskeletal discomfort.     

Evaluation of design alternatives for sewing scissors with respect to hand performance,discomfort and usability

The effects of three re-designed models of sewing scissors on hand performance measures, discomfort and usability were investigated, and the results were compared with those of conventional scissors. Adjustments were made to the scissors handle with emphasis on more neutral wrist postures (bent handle - model A), correction of the thumb's position and movements (model B) and reducing hand/finger discomfort (model C) while working with the tool. The results showed some improvements in hand performance, muscular effort, usability and discomfort with model B compared to the conventional model. Better hand performance and usability and lower discomfort were recorded with model C compared to the conventional model. The results suggest that the correction of the thumb's position and movement (model B) or even reduced hand/finger discomfort (model C) are perhaps more important considerations in scissors design than improved wrist posture (model A) for improving users' performance and usability of the tool.     

A Comparative Ergonomics Postural Assessment of Potters and Sculptors in the Unorganized Sector in West Bengal,India

Potters and sculptors perform their work in very awkward postures. The purpose of this study was to analyse these postures. The modified Nordic questionnaire was used to analyse musculoskeletal discomfort. Rapid entire body assessment (REBA) and rapid upper limb assessment (RULA) were used to evaluate the subjects’ postures. There were no significant differences between times of discomfort and the group of subjects. However, there were significant differences in discomfort in different body parts. The analysis indicated that various body postures were harmful to the subjects and that there were profound deviations from natural curvature of various body parts due to awkward body postures. Ergonomics intervention was required to improve the quality of life.     

Workstation design in carpet hand-weaving operation: guidelines for prevention of musculoskeletal disorders.

Carpet weavers suffer from musculoskeletal problems mainly attributed to poor working postures. Their posture is mostly constrained by the design of workstations. This study was conducted to investigate the effects of 2 design parameters (weaving height and seat type) on postural variables and subjective experience, and to develop guidelines for workstation adjustments. At an experimental workstation, 30 professional weavers worked in 9 different conditions. Working posture and weavers' perceptions were measured. It was shown that head, neck and shoulder postures were influenced by weaving height. Both design parameters influenced trunk and elbows postures. The determinant factor for weavers' perception on the neck, shoulders and elbows was found to be weaving height, and on the back and knees it was seat type. Based on the results, the following guidelines were developed: (a) weaving height should be adjusted to 20 cm above elbow height; (b) a 10 degrees forward-sloping high seat is to be used at weaving workstations.     

The Impact of Mobile Data Terminal Use on Posture and Low-Back Discomfort When Combined With Simulated Prolonged Driving in Police Cruisers

The introduction of mobile computing within a constrained vehicle environment has led to changes in the task demands of occupational groups such as professional drivers and law enforcement officers. The purpose of this study was to examine how mobile data terminal (MDT) use interacts with prolonged driving to induce postural changes or low-back discomfort. Eighteen participants (9 male, 9 female) completed two 120-min simulated driving sessions. Time-varying lumbar spine and pelvis postures, seat pan interface pressures and ratings of perceived discomfort were recorded at 15-min intervals. The introduction of a computer interface decreased pelvic posterior rotation by an average of 15° with respect to upright standing and increased peak average discomfort in the neck (5.9 mm), left shoulder (6.8 mm), midback (10.9 mm), low back (10.6 mm) and pelvis (11.5 mm) compared to driving alone. The incorporation of mobile computing warrants consideration in the design of vehicle work environments.     

Ergonomic design and evaluation of a diagnostic ultrasound transducer holder

Background. Work-related musculoskeletal disorders (WMSDs) are injuries and disorders that affect the body’s movement and musculoskeletal system. Awkward postures represent one of the major ergonomic risk factors that cause WMSDs among sonographers while working with an ultrasound transducer. This study aimed to design and evaluate a new holder for the ultrasound transducer. Materials and methods. In the first phase a new holder was designed for the transducer, considering design principles. Evaluation of the new holder was then carried out by electrogoniometry and a locally perceived discomfort (LPD) scale. Results. The application of design principles to the new holder resulted in an improvement of wrist posture and comfort. Wrist angles in extension, flexion, radial deviation and ulnar deviation were lower with utilization of the new holder. The severity of discomfort based on the LPD method in the two modes of work with and without the new holder was reported with values of 1.3 and 1.8, respectively (p?<?0.05). Conclusion. Overall, this study indicated that applying ergonomics design principles was effective in minimizing wrist deviation and increasing comfort while working with the new holder.     

An Ergonomie Study on Posture-Related Discomfort Among Preadolescent Agricultural Workers of West Bengal,India

In India, particularly in West Bengal, preadolescents are primarily associated with agricultural work in rural areas. Owing to poor socio-economic conditions, they are compelled to carry out a considerable number of manual, rigorous tasks in agricultural fields. The main aim of this study was to investigate postures adopted by preadolescent agricultural workers during individual agricultural activities and to analyze the causes of discomfort related to those postures. Fifty male and 50 female preadolescent agricultural workers were randomly selected and a detailed posture analysis was performed with the Ovako Working Posture Analysis System (OWAS). It was observed that those workers worked continuously in awkward postures during certain agricultural activities. Consequently they suffered from discomfort in different parts of their body. Even though they were very young, they were likely to suffer from serious musculoskeletal disorders in the future.     

An ergonomic study on posture-related discomfort among preadolescent agricultural workers of West Bengal, India.

In India, particularly in West Bengal, preadolescents are primarily associated with agricultural work in rural areas. Owing to poor socio-economic conditions, they are compelled to carry out a considerable number of manual, rigorous tasks in agricultural fields. The main aim of this study was to investigate postures adopted by preadolescent agricultural workers during individual agricultural activities and to analyze the causes of discomfort related to those postures. Fifty male and 50 female preadolescent agricultural workers were randomly selected and a detailed posture analysis was performed with the Ovako Working Posture Analysis System (OWAS). It was observed that those workers worked continuously in awkward postures during certain agricultural activities. Consequently they suffered from discomfort in different parts of their body. Even though they were very young, they were likely to suffer from serious musculoskeletal disorders in the future.     

Relationship between musculoskeletal disorders and anthropometric indices among bus drivers in Zahedan city

Introduction. Most work-related musculoskeletal disorders (MSDs) are associated with improper postures and poorly designed workstations. This study is an attempt to examine the prevalence and severity of MSDs as well as anthropometric dimensions among city bus drivers. Methodology. This cross-sectional study was carried out on 60 male bus drivers. A body discomfort chart was used to evaluate MSDs. Spearman correlation was employed to examine the relationship between body size and the severity of discomfort. Results. Data analysis showed that discomfort reported in the lower back (33.3%), upper back (18.3%) and knee (15%) was severe and there was a direct and significant correlation between the body mass index and the severity of discomfort in the shoulder, arm and hip (p?p?Conclusion. The results of the study can be used to address ergonomic risk factors and reduce their associated disorders. The findings of the study can be used in training programs to educate drivers how to decrease the risk associated with work-related MSDs by adopting appropriate behavior strategies.     

Flicker Test as a Load Measurement During the Combined Effect of Heat and Noise

This study was a joint physiological and psychological experiment undertaken to determine changes in physiological and psychological human functions under the combined influence of heat, noise, and physical activity. Seven experimental situations were simulated in a climatic chamber with different configurations of three independent variables: heat (40 °C), noise (98 dB), and physical effort (30% of maximum volume of oxygen uptake—V0₂ max). Five psychological variables (critical flicker fusion—CFF, hand tremor, reaction time, subjective climate evaluation, and subjective evaluation of the given condition load) and two physiological variables (heart rate and rectal temperature) were monitored. Results indicate that CFF changed (increased) significantly when more than one experimental variable was applied. These changes coincided with significant changes in both subjective climate evaluation and subjective evaluation of a given condition load. There were no significant changes in psychomotor functions (hand tremor and reaction time). None of the observed physiological parameters were above the critical value. The results suggest that CFF can be treated as a psychophysical load indicator.     

Ergonomics in Practice: Physical Workload and Heat Stress in Thailand

This study consists of assessments of the thermal environment and physio-logical strain in tasks associated with airport, construction, and metal jobs. The number of male and female participants was 108. Environmental heat stress was evaluated with the WBGT index. Physiological strain was evaluated by the relative cardiovascular load (%CVL) based on the measurements of heart rate. Also the increase of body temperature, weight loss, and perceived discomfort were determinated. At work sites the assessments lasted for 2 to 4 hrs for each participant. The mean physiological strain exceeded the level of 30%CVL. Severe peaks (over 60%CVL) were observed in specific tasks being in agreement with perceived discomfort ratings. The increase of body temperature and weight loss in most cases remained within acceptable limits. For the most strenuous tasks, various ergonomic improvements were developed in consultation with workers and managers.     

Ergonomic analysis of working postures using OWAS in semi-trailer assembly,applying an individual sampling strategy

In semi-trailer assembly, workers are exposed to several physical risk factors. Awkward working postures have not yet been investigated in semi-trailer assembly, although they are known to be a major risk factor for musculoskeletal disorders. We therefore conducted a comprehensive ergonomic analysis of working postures using the Ovako working posture analysing system (OWAS), with an individual sampling strategy. The postural load in semi-trailer assembly was assessed on the basis of 20,601 observations of 63 workers executing a representative set of nine work tasks. According to the OWAS, the postural load of various working postures and body part positions may have a harmful effect on the musculoskeletal system. We therefore give examples of corrective measures that could improve awkward working postures. Applying an individual sampling strategy was revealed to have advantages over a collective strategy, so this is recommended for future ergonomic analyses.     

Musculoskeletal Symptoms In Workers

Self-report measures of musculoskeletal discomfort are a widely used and generally accepted risk factor for musculoskeletal disorders in epidemiologic research. The aim of this study was to investigate the prevalence of musculoskeletal symptoms in packing workers. A cross-sectional study of 75 workers was carried out using a modified Nordic questionnaire. Prevalence was determined with the percentage of positive responses to questions on musculoskeletal symptoms. Odds ratios and 95% confidence intervals were the measures of association between prevalent musculoskeletal symptoms and demographic factors; they were determined with logistic regression. Most musculoskeletal symptoms in workers were from the low back (44.0%), shoulders (33.3%) and neck (32.0%). Years worked were strongly significantly associated with musculoskeletal symptoms and pain in the neck, shoulders and wrists/hands, P< .001-.050. Hazards related to repetitive movements and discomfort postures could be reduced with stretching exercises, rotation schedules and through new engineering solutions.     

An experimental study to evaluate musculoskeletal disorders and postural stress of female craftworkers adopting different sitting postures

This study aimed to evaluate musculoskeletal disorders (MSDs) and postural stress among female craftworkers. The study was carried out on 75 adult female craftworkers in different districts of West Bengal. The prevalence of MSDs, body part discomfort (BPD) rating and body joint angles of the workers were evaluated with standard methods. Electromyography (EMG) of the shoulder and back muscles was recorded with the BIOPAC system. The prevalence of MSDs, BPD rating and deviation of joint angle were comparatively lower in the case of sitting on the floor with folded legs than squatting and sitting on the floor with stretched legs postures. The EMG and rms values of the shoulder and back muscles were comparatively lower in this posture. Therefore, it was concluded that sitting on the floor with folded legs was less hazardous and it imposed less postural stress in comparison to other sitting postures.     

An ergonomics study on wrist posture when using laparoscopic tools in four techniques in minimally invasive surgery

Purpose. With reference to four minimally invasive surgery (MIS) cholecystectomies, the aims were (a) to recognize the factors influencing dominant wrist postures manifested by the surgeon; (b) to detect risk factors involved in maintaining deviated wrist postures; (c) to compare the wrist postures of surgeons while using laparoscopic tools. Methods. Video films were recorded during live surgeries. The films were synchronized with wrist joint angles obtained from wireless electrogoniometers placed on the surgeon's hand. The analysis was conducted for five laparoscopic tools used during all surgical techniques. Results. The most common wrist posture was extension. In the case of one laparoscopic tool, the mean values defining extended wrist posture were distinct in all four surgical techniques. For one type of surgical technique, considered the most beneficial for patients, more extreme postures were noticed regarding all laparoscopic tools. We recognized a new factor, apart from the tool's handle design, that influences extreme and deviated wrist postures. It involves three areas of task specification including the type of action, type of motion patterns and motion dynamism. Conclusions. The outcomes proved that the surgical technique which is best for the patient imposes the greatest strain on the surgeon's wrist.?     

军工危险性建筑物外部安全距离美国和我国标准对比分析

针对军工危险性建筑物外部安全距离确定时药量覆盖不全面、新产品无依据、厂房用地与城市发展用地矛盾等问题,对美国标准和我国标准中安全距离的分类、确定原则、确定方法进行了对比分析,提出了对我国标准修订的建议,为我国军工危险性建筑物外部安全距离标准的制修订提供借鉴。