Surface chemistry of activated carbons and its relevance for effects of relative humidity on adsorption of chlorinated organic vapors

The effects of relative humidity (RH) on the adsorption of methylene chloride (METH) and 1,1,1-trichloroethane (TCEA) on two commercial activated carbons, made from bituminous coal (carbon BPL) and coconut shell (carbon PCB), were studied. Three levels of RH were tested by tracking the breakthrough curves of each adsorbate eluted from a fixed-bed adsorption column. Adsorption capacities for these adsorbates were decreased with increase of RH. The magnitude of the effect of water vapor on adsorption is greater for carbon BPL and METH than for carbon PCB and TCEA. The results of the effect of water vapor on the adsorption capacity observed in this study were further examined based on the chemical characterization of activated carbons and the fundamental physical differences between the adsorbates.     

Removal characteristics of trace compounds of landfill gas by activated carbon adsorption

The removal characteristics of trace compounds and moisture in raw landfill gas (LFG) were studied. The LFG from the extraction well was saturated with water and moisture was eliminated by physical methods including cyclone-type dehydrator and compressor. The moisture removal efficiency of dehydrator and compressor was above 80%. As the moisture contents of LFG decreased, the toxic compounds like aromatics and chlorinated compounds were effectively removed by using the granular activated carbon. The breakthrough time and adsorption capacity of benzene, toluene, and ethyl benzene decreased rapidly when the relative humidity is over 60%. The effect of moisture was more pronounced at lower adsorbate concentrations tested than at higher concentrations. The breakthrough curves for multi-component mixtures show displacement effects. In the course of competing adsorption, adsorbates with strong interaction force to displace weakly bounded substances. Adsorption by activated carbon is in descending order of xylene, ethylbenzene, toluene, tri or tetrachloroethylene, benzene, carbon tetrachloride and chloroform in LFG, respectively.     

活性碳纤维吸附甲苯废气吸附等温方程的研究

研究了固定床吸附器中粘胶基活性碳纤维（viscose rayon-based ACFs）吸附甲苯废气的特性，通过实验测定活性碳纤维吸附不同浓度甲苯废气的穿透曲线，作出等温吸附曲线。根据实验数据拟合出几个吸附平衡方程，并与实验结果进行比较。实验结果可为工业设备设计提供参考。     

活性碳纤维吸附甲苯废气吸附等温方程的研究

研究了固定床吸附器中粘胶基活性碳纤维(viscose rayon-based ACFs)吸附甲苯废气的特性,通过实验测定活性碳纤维吸附不同浓度甲苯废气的穿透曲线,作出等温吸附曲线,根据实验数据拟合出几个吸附平衡方程,并与实验结果进行比较.实验结果可为工业设备设计提供参考.     

甲苯气体的动态吸附净化及吸附剂再生实验研究

研究了活性炭纤维(ACF)对甲苯气体的动态吸附净化过程及热空气解吸脱附再生过程.采用3种经验方程对ACF的吸附等温线进行拟合,其中Langmuir方程拟合效果最好,拟合相关系数R2 =0.9960,说明在给定的浓度范围内,ACF对甲苯的吸附是以单分子层吸附为主.穿透曲线实验表明,ACF对甲苯吸附效果较好,Yoon-Ne...     

新型水处理活性炭选型技术

活性炭依其原料不同、生产工艺不同,而有不同的吸附性能.使用简易的活性炭选型方法,可以减少应用测试时的备选炭型,从而大大降低活性炭水处理技术的运行成本.以碘值、甲基蓝值、苯酚值和丹宁酸值4种吸附容量性能指标为依据的活性炭选型技术,可以有效地预测活性炭对于水中各种大小不同污染物的去除能力.BET测试结果证明了这4项指标数据对于活性炭孔径分布预测的准确性.2,4-二氯苯酚和腐殖酸等目标化合物的吸附容量实验结果也都验证了这4项指标的预测功用,说明这种简便的活性炭选型技术有着广泛的应用价值.     

Breakthrough indicator for aromatic VOCs using needle trap samplers for activated carbon adsorbent

Internal circulation cabinets equipped with granular activated carbon (GAC) for adsorbing volatile organic compounds (VOCs) are widely used to store bottles containing organic solvents in universities, colleges, and hospital laboratories throughout Taiwan. This work evaluates the VOC adsorption capacities of GAC using various adsorption times for gas stream mixtures of 100 ppm toluene and 100 ppm o-xylene. Additionally, needle trap sampling (NTS) technology was used to indicate the time for renewing the GAC to avoid VOC breakthrough from adsorbents. Experimental results demonstrate that the proposed models can linearly express toluene and o-xylene adsorption capacities as the natural logarithm of adsorption time (ln(t)) and can accurately simulate the equilibrium adsorption capacities (Qe, g VOCs/g GAC) for gaseous toluene and o-xylene. The NTS, packed with 60-80 mesh divinylbenzene (DVB) particles, was compared in terms of extraction efficiency by simultaneously using the 75-microm Carboxen/polydimethylsiloxane-solid-phase microextraction (Carboxen/PDMS-SPME) fiber for time-weighted average (TWA) sampling, and experimental results indicated that the packed DVB-NTS achieved higher toluene extraction rates. Additionally, the NTS installed in the outlet air stream for adsorbing toluene and o-xylene exhausted through GAC accurately indicated toluene and o-xylene breakthrough times of 4700-5000 min. The GAC-NTS operational instructions to indicate the replacing time of adsorbent in the internal circulation cabinets are also included in this paper.     

废弃物基活性炭吸附挥发性有机污染物特性的研究

研究了废弃物基活性炭对挥发性有机污染物中的典型组分--甲苯的吸附特性.结果表明,废弃物基活性炭吸附甲苯等温线的类型系优惠型吸附等温线,表明具有良好的吸附能力;同时其吸附甲苯时穿透时间的对数与甲苯入口浓度的对数之间具有良好的线性相关性,即可由吸附高浓度甲苯时的穿透时间估算低浓度时的穿透时间;动态吸附时废弃物基活性炭的中孔对甲苯亦具有一定的吸附性能.     

Modeling VOCs adsorption onto activated carbon

The activated carbon adsorption process is affected by the characteristics of adsorbent, adsorbate and environmental conditions. In this study, both adsorption and desorption processes are assumed to occur simultaneously and a numerical model was developed with a non-linear driving force in conjunction with the Langmuir model for predicting the overall adsorption process. The numerical model provides both adsorption and desorption rate constants and activation energies. The resultant equilibrium constants are of the same order of magnitude as reported by other studies. Results show that the model could well predict the adsorption isotherms and breakthrough curves under various conditions.     

Comprehending adsorption of methylethylketone and toluene and microwave regeneration effectiveness for beaded activated carbon derived from recycled waste bamboo tar

ABSTRACT

Beaded activated carbons (BACs) were derived from waste bamboo tar through carbonization (500°C for 2 hr) followed by physical activation using carbon dioxide (800–900°C for 2–4 hr). The adsorbent was examined for their physical and chemical properties, adsorption capacities toward methylethylketone (MEK) and toluene, and regenerabilities under microwave heating. It was found that the maximum total surface area reached for bamboo-tar-derived BAC after physical activation was 1364 m² g^?1, and more than 95% of the area was attributed to the microporous structures. Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherm models were applied to the adsorption isotherm fitting, and the minimum R² for each model was 0.986, 0.915, and 0.943, respectively. The isosteric heats of adsorption calculated based on D-R parameters for methylethylketone and toluene were 44.04 to 51.50 and 45.88 to 73.27 KJ mol^?1, respectively. They were slightly over the range of physisorption and increased with adsorbate loading, which might be related to the micropore filling mechanism. Microwave regeneration under 600 W of power output removed most of the adsorbate (>93.03%) within 8 min. The results of this study are intended to benefit future study on waste-derived adsorbent in environmental applications.     

椰壳活性炭吸附消除VOCs

对一种椰壳活性炭对甲基丙烯酸甲酯的吸附消除行为进行了研究,重点考察了甲基丙烯酸甲酯的浓度、流速和吸附温度等条件以及水汽存在时对活性炭吸附行为的影响。结果表明,该颗粒活性炭对甲基丙烯酸甲酯有良好的吸附效果,甲基丙烯酸甲酯进口浓度和进气量的改变均会影响吸附饱和时间,导致其增加或减少。通过变温吸附实验确定降低环境温度对其吸附有促进作用。湿度为50%时吸附量相对干气饱和吸附量影响较小,说明该活性炭抗水汽能力较好。经多次重复再生实验,其饱和吸附量未见明显下降。     

水溶液中腐殖酸和苯酚在ZH-02树脂上的双组分吸附

通过苯甲酰基修饰的苯乙烯-二乙烯苯吸附树脂ZH-02对水中腐殖酸和苯酚进行了单组分和双组分的静态吸附.结果表明,在腐殖酸为主要吸附质的二元组分溶液中,对苯酚的吸附量的影响可以利用IAST模型进行预测;而在不存在主要吸附质的二元溶液中,可以用单组分体系的平衡吸附量近似预算双组分竞争体系时各组分的平衡吸附量.     

水溶液中腐殖酸和苯酚在ZH-02树脂上的双组分吸附

通过苯甲酰基修饰的苯乙烯-二乙烯苯吸附树脂ZH-02对水中腐殖酸和苯酚进行了单组分和双组分的静态吸附.结果表明,在腐殖酸为主要吸附质的二元组分溶液中,对苯酚的吸附量的影响可以利用IAST模型进行预测;而在不存在主要吸附质的二元溶液中,可以用单组分体系的平衡吸附量近似预算双组分竞争体系时各组分的平衡吸附量.     

颗粒活性炭去除水中甲基叔丁基醚的可行性研究

随着甲基叔丁基醚（MTBE）作为汽油添加剂被持续大量使用，其已成为一种地下水中常见的有机污染物。本文通过纯净水、自来水和地下水中MTBE的平衡吸附容量和微型快速穿透实验（MCRB），比较了5种不同种类活性炭对MTBE的吸附性能。结果显示，苯酚值可准确预测活性炭样品对MTBE的平衡吸附容量大小次序，而丹宁酸值则可大致估计活性炭在实际处理应用时的吸附速度和吸附容量利用率。水样中共存的有机成分降低了活性炭对纯净水中MTBE的吸附容量，在背景TOC较低的去离子水中，活性炭对于MTBE的吸附性能反而比在地下水中降低得更多。穿透实验数据显示双柱串联的处理方式是高效应用活性炭吸附水中MTBE的优选工艺。使用环境友好的竹质活性炭去除地下水中MTBE具有良好的可行性和较高的性价比。     

Decomposition of benzene and toluene in air streams in fixed-film photoreactors coated with TiO2 catalyst

The decomposition of benzene and toluene in air streams by UV/TiO2 process was studied in different annular photoreactors under various operating conditions. The shells of reactors used in this research are made of stainless steel, Pyrex glass, or titanium. The TiO2 film was coated to the inner surface of the reactors by either rotating coating or sol-gel techniques. The TiO2 films coated by sol-gel technique were found to be smoother and more uniform than those coated by rotating coating. However, experimental results indicated that the photocatalysis of benzene or toluene in a glass reactor with rotating-coated TiO2 film delivered higher decompositions in air streams than that with sol-gel coated reactors. Benzene and toluene were decomposed more effectively in a coated glass reactor than in a coated stainless steel reactor under the same operating conditions. The presence of water vapor in air-stream plays an important role in the decomposition of benzene and toluene, and a relative humidity of approximately 5-6% was found to be adequate. The presence of excessive amounts of humidity retarded the decomposition to certain extents possibly results from the competitive adsorption of water molecules on the active sites of TiO2.     

改性污泥活性炭对水中镉离子的吸附性能

以城市污水处理厂的剩余污泥为原料,氯化锌为活化剂制备污泥活性炭,对一部分污泥活性炭用6.0 mol/L的硝酸进行改性,并研究了未改性和改性的污泥活性炭对Cd2＋的吸附行为的影响。结果表明,在pH为5.0、Cd2＋初始浓度为100 mg/L、吸附剂投加量为2.0 g/L、反应温度为25℃时,未改性的污泥活性炭吸附容量为8.45 mg/g,硝酸改性的污泥活性炭吸附容量达到了23.35 mg/g。改性和未改性的污泥活性炭对Cd2＋都有较好的吸附容量,硝酸改性大幅度提高了污泥活性炭对Cd2＋的吸附性能。常温下改性污泥活性炭对Cd2＋的吸附符合Langmuir吸附等温式。     

Attempt to adsorb N-nitrosamines in solution by use of zeolites

The strong adsorption of zeolite for N-nitrosamines in solution was first revealed by use of adsorption, and temperature programmed surface reaction (TPSR) techniques. N-nitrosodimethylamine (NDMA) and N-nitrosopyrrolidine (NPYR) as well as N-nitrosohexamethyleneimine (NHMI) can be adsorbed on zeolite Y, ZSM-5 and A in the solution of methylene chloride or water, which will be helpful for removal of the N-nitrosamines pollution in environmental protection. The equilibrium data were fitted to Freundlich-type isotherms, but the adsorption capacity of zeolites mainly depended on their pore size, surface area and acid-basic properties. Molecular size of adsorbate and solute-solvent interaction also strongly affected the adsorption of N-nitrosamines on zeolite in solution. The extraordinary adsorption properties of NaA zeolite for N-nitrosamines in aqueous solution is first reported and discussed.     

花生壳活性炭对亚甲基蓝的吸附特性

以花生壳为原料,氯化锌为活化剂制备花生壳活性炭,采用高分辨电子扫描电镜(SEM)和氮吸脱附曲线对花生壳活性炭进行了表征.从热力学和动力学的角度,研究了花生壳活性炭对亚甲基蓝溶液的吸附行为.热力学研究表明,花生壳活性炭对亚甲基蓝的吸附符合Langmuir等温吸附方程,该吸附是自发吸热过程,吸附自由能为-52.4017～-95.1765 kJ/mol,吸附熵变为214 J/(mol·K),吸附焓变为57.49796 kJ/mol.动力学研究表明,花生壳活性炭对亚甲基蓝的吸附符合二级反应动力学方程反应特征.     

活性炭孔隙结构在其甲苯吸附中的作用

选用4种商用活性炭(AC),利用氮气绝热吸附、扫描电子显微镜(SEM)和傅立叶变换红外光谱(FTIR)测试了活性炭的物化性质。以甲苯为吸附质,在温度为298.15 K下进行了静态和动态吸附实验,研究了活性炭孔结构对其吸附性能、吸附行为、表面覆盖率和吸附能的影响。结果表明:活性炭的比表面积和孔容是其吸附性能主要影响因素,孔径在0.8～2.4 nm之间的孔容和甲苯吸附量之间存在较好的线性关系,且线性斜率随甲苯浓度增加而变大。甲苯吸附行为符合Langmuir吸附等温模型和准一阶动力学方程式。活性炭孔结构是甲苯吸附速率的主要制约因素。在甲苯快速吸附阶段,微孔为吸附速率主要制约因素,在甲苯颗粒内扩散阶段,微孔和表面孔为吸附速率的主要制约因素,在吸附末尾阶段,中孔和大孔为吸附速率的主要制约因素。4种活性积炭对甲苯的吸附能随其比表面变大而变大。     

烧结纤维承载活性炭复合材料在苯蒸气脱除中的应用

以8μm的镍纤维和煤基活性炭为原材料,通过抄制和烧结工艺制备了烧结纤维承载活性炭粉末复合材料。为了减轻床层总重量,将这种材料和通常的颗粒状活性炭进行联合装填形成复合层,并进行了苯蒸气的吸附穿透实验。利用Wheeler方程对床层的饱和吸附容量和吸附速率常数进行了测定。结果表明,在相同的测试条件下,联合装填层比单独的颗粒炭装填层具有更好的苯蒸气脱除性能;对两种床层而言,其各自的饱和吸附容量是一个不随比速而变化的常数,而随着气流比速的增加,两种床层的吸附速度都呈增加的趋势。