Upper limb load as a function of repetitive task parameters: part 1--a model of upper limb load.

The aim of the study was to develop a theoretical indicator of upper limb musculoskeletal load based on repetitive task parameters. As such the dimensionless parameter, Integrated Cycle Load (ICL) was accepted. It expresses upper limb load which occurs during 1 cycle. The indicator is based on a model of a repetitive task, which consists of a model of the upper limb, a model of basic types of upper limb forces and a model of parameters of a repetitive task such as length of the cycle, length of periods of the cycle and external force exerted during each of the periods of the cycle. Calculations of the ICL parameter were performed for 12 different variants of external load characterised by different values of repetitive task parameters. A comparison of ICL, which expresses external load with a physiological indicator of upper limb load, is presented in Part 2 of the paper.     

Upper limb load as a function of repetitive task parameters: part 2--an experimental study.

The aim of the study was to compare the theoretical indicator of upper limb load with the physiological indicator of musculoskeletal load, which is present while performing a repetitive task (a normalized electromyography [EMG] amplitude recorded from the muscles of the upper limb involved in the performed task). In an experimental study of a repetitive task, the EMG signal from 5 main muscles of the shoulder girdle, arm and forearm was registered: extensor carpi radialis longus, flexor carpi ulnaris, deltoideus anterior, biceps brachii caput breve and trapezius descendent. The results of the study showed a strong correlation between the theoretical indicator (Integrated Cycle Load) and the physiological indicator (root mean square of a normalized EMG amplitude from the 5 muscles). This proves that the developed theoretical indicator can be accepted as an indicator of upper limb musculoskeletal load during a work task.     

基于JACK的机务人员上肢职业性损伤的仿真与评估*

为客观评价机务人员上肢职业性肌肉骨骼损伤风险,选取作业姿势、肌肉负载和暴露时间作为评估工作过程中机务人员肌肉骨骼损伤的指标,结合工效学和仿真技术,建立机务维修中肌肉骨骼损伤风险仿真评价方法,定量评估工作过程中机务人员肌肉骨骼损伤程度。采用动素理论分解A330飞机六号肋改装作业任务,对作业人员、工作场景、维修动作进行建模,使用JACK软件中的人因分析工具（TAT）分别对选取指标进行分析评估。研究结果表明:在六号肋改装作业中,机务人员存在严重的上肢职业性肌肉骨骼损伤的隐患,此研究方法可客观高效评估机务人员上肢职业性肌肉骨骼损伤的程度。     

Experimental Verification of the Computerized Method for Work Space Optimization in Conditions of Static Work

The aim of this study was to verify a theoretical model for upper extremity work space optimization. In order to do that, experimental studies were conducted in which two parameters of the electromyography (EMG) signal were analyzed: AMP (amplitude calculated as Root Mean Square) and SZC (coefficient of the slope of the regression line between time and Zero Crossing values). Values of forces in muscles (parameter MOD) were calculated from theoretical studies. A comparison of experimental (AMP, SZC) and theoretical (MOD) parameters was performed by analyzing the coefficient of correlation between those parameters and differentiation of muscular load according to external load value. Analysis showed that the theoretical and experimental results are in step, which means that the developed model can be used for upper extremity work space optimization.     

Improving body posture while fueling with a newly designed pump nozzle

Background. Although petrol pumps are a very common and highly used simple technology, their design consideration for comfort and safety to prevent high-pressure load and musculoskeletal injuries to the body is a neglected area in many countries including Iran. Objectives. This study attempted to design a new pump nozzle, and to assess the differences in musculoskeletal load related to body posture when a price/volume display is mounted on the pump nozzle. Methods. For postural analysis, photographs recording the posture of 100 randomly selected customers while fueling at petrol pumps and the rapid upper limb assessment (RULA) technique were used. Results. The results of this study showed that RULA scores improved significantly after the newly designed pump nozzle was used. Conclusion. The newly designed pump nozzle is useful in reducing load related to body posture while fueling.     

A Comparative Ergonomics Postural Assessment of Potters and Sculptors in the Unorganized Sector in West Bengal,India

Potters and sculptors perform their work in very awkward postures. The purpose of this study was to analyse these postures. The modified Nordic questionnaire was used to analyse musculoskeletal discomfort. Rapid entire body assessment (REBA) and rapid upper limb assessment (RULA) were used to evaluate the subjects’ postures. There were no significant differences between times of discomfort and the group of subjects. However, there were significant differences in discomfort in different body parts. The analysis indicated that various body postures were harmful to the subjects and that there were profound deviations from natural curvature of various body parts due to awkward body postures. Ergonomics intervention was required to improve the quality of life.     

Job level risk assessment using task level ACGIH hand activity level TLV scores: a pilot study.

Existing upper extremity musculoskeletal disorder analytical tools are primarily intended for single or mono-task jobs. However, many jobs contain more than 1 task and some include job rotation. This case/control study investigates methods of modifying an existing tool, the American Conference of Governmental Industrial Hygienists (ACGIH) Hand Activity Level (HAL) Threshold Limit Value (TLV), to assess the upper extremity risk of multi-task jobs. Various methods of combining the task differences and ratios into a job level assessment were explored. Two methods returned significant odds ratios, (p < .05) of 18.0 (95% CI 1.8-172) and 12.0 (95% CI 1.2-120). These results indicate that a modified ACGIH HAL TLV may provide insight into the work-related risk of multi-task jobs. Further research is needed to optimize this process.     

Characteristics of Muscular Load in Computer Data Entry Workers Assessed by EMG and Postural Angles

The goal of this study was to characterize the muscular load in computer data entry workers. Electromyography (EMG) parameters of trapezius muscle and postural angles of head, arm, and back were chosen as indicators of musculoskeletal load. The examination was done according to the methods and protocol of international MEPS studies (the “Musculoskeletal, Visual, and Psychosocial Load in VDT [Video Display Terminal] Operators in Optimized Environment” international program). The musculoskeletal load during routine VDT data entry work performed by a group of 36 women was assessed on the basis of 1-hr physiometer recordings. Results show that the musculoskeletal load associated with data entry is relatively high compared to other VDT operators’ tasks described in the literature. An analysis of the measured parameters shows that most of the time women worked with a muscular load higher than optimal. It is postulated that the main reason for the heavy musculoskeletal load was improper posture compelled by unergonomic spatial configuration of work stands.     

电视机和有线通讯设备流水线作业工人慢性肌肉骨骼损伤调查研究

电视机和有线通讯设备的生产，均采用流水线作业方式，３９０名生产工人的主要慢性肌肉骨骼损伤有手疲劳、右臂疲劳及肩痛，与对照人群比较，Ｐ〈０．０５差异显著。手痛、腕痛、颈痛及上下背痛虽多于对照人群，但无统计学意义，这与Ｌａｏｐａｊａｒｒｉ和ｓｈｉｈａｎ 等报告不同，这可能与当时工厂定额相对较低，全天纯劳动工时相对短有关     

Effect of External Load at Varying Hand Positions on Perceived Discomfort

The purpose of this study was to assess the effect of external load at varying hand positions on discomfort, and to provide a new classification of external load. An experiment was carried out in which 16 postures with an external load of 0, 1.5, 3 kg were tested. The postures were controlled by 2 independent variables of hand distance and hand height. The subjects were instructed to rate their perceived discomfort with magnitude estimation after holding a given posture for 1 min. Analysis of variance (ANOVA) exhibited that the main effects of the 3 independent variables were statistically significant for discomfort. Discomfort increased linearly with external load and hand distance. Hand height showed a quadratic relation with discomfort, which exhibited a slightly different trend from hand distance and external load. Based on the results, a new classification of external load was proposed with 3 classes grouped by perceived discomfort.     

Factors affecting the musculoskeletal disorders of workers in the frozen food manufacturing factories in Thailand

The purpose of this research was to study factors affecting musculoskeletal disorders. The sample population of the study was 528 factory workers from the frozen food industry, as well as a controlled group of 255 office workers. The samples were collected during interviews using the Nordic questionnaire to assess musculoskeletal disorders, and to assess the risk by the rapid upper limb assessment and rapid entire body assessment techniques. The findings of the study were that most symptoms were found in the dissecting department, higher than in the controlled group. The details of the symptoms were, accordingly: elbow pain (adjusted odds ratio, 35.1; 95% CI [17.4, 70.9]). Regarding the risk of alcohol drinking, workers were exposed to more risks when alcohol was consumed. It is suggested that workers’ health should be monitored regularly. People who work in a cold environment should be encouraged to wear body protection and to avoid drinking.     

Small Female Upper Extremity Interaction with a Deploying Side Air Bag

This paper presents a study characterizing the interaction between a deploying side air bag and a small female upper extremity. The results are based on twelve tests with small female cadavers, and fifteen tests with the instrumented SAE 5th percentile female upper extremity attached to the 5th percentile Hybrid III female dummy. The upper extremity was loaded by a deploying seat mounted thoracic side air bag in a static test environment. Three inflators were used that varied in peak pressure and pressure onset rate. Despite kinematic differences between the dummy and cadaver, the moments recorded in the cadaver and dummy were similar. Chondral and osteochondral fractures in the cadaver elbow joints were identified in seven of the twelve cadaver tests, while a simple fracture of the distal humerus head was observed in one test. A linear logistic regression analysis was performed to correlate occurrence of recorded injury and the test parameters. Injury risk functions were constructed using age, forearm acceleration, elbow moment, and air bag inflator level as variables.     

Electromyographic analysis of relevant muscle groups during completion of computer tasks using different computer mouse positions

Background. We analyzed muscular activity for different computer mouse positions during the completion of a timed computer task and determined whether the different mouse positions could affect muscular activity, productivity and perceived fatigue. Methods. The subjects were nine healthy young men. Two mouse positions were studied: the distal position (DP), with the forearm rested on the desk; the proximal position (PP), with only the wrist rested on the desk. The subjects performed a 16-min task in each position. Surface electromyography data were recorded for the upper back and shoulder muscles. Work productivity and muscular activity were measured for each mouse position. A visual analog scale was used to assess subjective fatigue. Results. Muscular activity was higher in muscle (m.) deltoideus (posterior) for the DP, while it was significantly higher in m. inferior infraspinatus for the PP. The visual analog scale score was significantly higher and work productivity was lower in the PP. Conclusions. We found that using a mouse in the DP rather than the PP leads to less activity of the external rotators, less perceived fatigue and more productivity. This suggests that the DP is preferable to the PP for computer work involving a mouse.     

The influence of axle position and the use of accessories on the activity of upper limb muscles during manual wheelchair propulsion

Introduction. Wheelchair configuration is an important factor influencing the ergonomics of the user–device interface and, from a biomechanical point of view, small changes in chair setup may have a positive influence on the demand on the upper limbs during manual propulsion. This study aimed to investigate the influence of the position of the rear wheels’ axle and the use of accessories on the activity of upper limb muscles during manual wheelchair propulsion. Methods. Electromyography signals of the biceps, triceps, anterior deltoids and pectoralis major were collected for 11 able-bodied subjects in a wheelchair propulsion protocol with four different wheelchair configurations (differing in axle position and the use of accessories) on a straightforward sprint and a slalom course. Results. With accessories, moving the axle forward led to a decrease in the activity of all muscles in both the straightforward sprint (significant differences in triceps, anterior deltoids and biceps) and the slalom course (significant difference in anterior deltoids and biceps). However, when propelling the chair without accessories, no difference was found related to axle position. Conclusion. Changes in wheelchair configuration can influence the ergonomics of manual wheelchair propulsion. Reducing the biomechanical loads may benefit users’ mobility, independence and social participation.     

The effects of hand force variation on shoulder muscle activation during submaximal exertions

Upper limb injuries are highly prevalent in the workplace and new tools are needed to proactively design workstations to reduce injury risk. The objective was to characterize spatial, load and direction dependency of muscle activity for hand exertions in the upper limb workspace. Electromyographic signals were collected from 14 upper limb muscles during exertions for all combinations of 4 submaximal hand forces (20/30/50/60?N) in 6 cardinal (up/down/left/right/forward/backward) directions at 5 hand locations. Linear muscle activity increases accompanied increased hand forces. Total muscle activity increases between 20 and 60?N hand forces ranged by direction from 92% (downward) to 189% (right). Prediction equations for all muscles depended on hand force, and linear, quadratic and interaction permutations of hand location. Muscle activity associated with manual tasks is load, direction and spatially dependent. Equations developed to describe these complex relationships can be used to better design future and evaluate current occupational activities.     

An experimental study to evaluate musculoskeletal disorders and postural stress of female craftworkers adopting different sitting postures

This study aimed to evaluate musculoskeletal disorders (MSDs) and postural stress among female craftworkers. The study was carried out on 75 adult female craftworkers in different districts of West Bengal. The prevalence of MSDs, body part discomfort (BPD) rating and body joint angles of the workers were evaluated with standard methods. Electromyography (EMG) of the shoulder and back muscles was recorded with the BIOPAC system. The prevalence of MSDs, BPD rating and deviation of joint angle were comparatively lower in the case of sitting on the floor with folded legs than squatting and sitting on the floor with stretched legs postures. The EMG and rms values of the shoulder and back muscles were comparatively lower in this posture. Therefore, it was concluded that sitting on the floor with folded legs was less hazardous and it imposed less postural stress in comparison to other sitting postures.     

The influence of age and type of force on muscle strength capabilities in women

The aim of this study was to assess handgrip and 5 other types of force in 52 women and to determine if handgrip force reflected general upper limb force capabilities correlated with age. The women were divided into subgroups according to age: 20-25, 45-50 and 55-65 years. Maximum forces of the right upper limb were measured in 6 types of force activities. In most tests the values of force showed statistically significant differences between the 20-25 group and the groups aged 45-50 and 55-64 years. The results did not show any differences related to age or to force activities that involved the small muscles of the forearms and hands. Thus handgrip force cannot always be considered an indicator of total force capabilities.     

Ergonomic analysis of working postures using OWAS in semi-trailer assembly,applying an individual sampling strategy

In semi-trailer assembly, workers are exposed to several physical risk factors. Awkward working postures have not yet been investigated in semi-trailer assembly, although they are known to be a major risk factor for musculoskeletal disorders. We therefore conducted a comprehensive ergonomic analysis of working postures using the Ovako working posture analysing system (OWAS), with an individual sampling strategy. The postural load in semi-trailer assembly was assessed on the basis of 20,601 observations of 63 workers executing a representative set of nine work tasks. According to the OWAS, the postural load of various working postures and body part positions may have a harmful effect on the musculoskeletal system. We therefore give examples of corrective measures that could improve awkward working postures. Applying an individual sampling strategy was revealed to have advantages over a collective strategy, so this is recommended for future ergonomic analyses.     

不同外热部位下18650型锂离子电池热失控研究

为探究不同外热部位对18650型锂离子电池热失控特性的影响,通过自主设计的试验平台对电荷量为100%的18650型锂离子电池开展不同外热部位下热失控试验,探讨不同部位外热源对电池热失控行为过程、热失控响应时间、温度特性、电池破裂部位的影响。结果表明:在相同热源功率条件下,外热源位置对电池热失控过程中初爆与二次燃爆间的时间间隔存在影响,顶部加热时安全阀打开瞬间便发生二次燃爆,底部和中部加热工况下,时间间隔分别延迟至18 s和40 s;中部加热时池体温升速率最慢,为0.873℃/s,分别为顶部和底部加热时的77.5%和77.8%;中部加热时热失控响应时间最长达290 s,顶部和底部加热时分别缩短12.4%和30.0%;顶部和底部加热时,热失控破裂部位集中于顶部"褶皱处"和底部防爆阀,但在中部加热工况下,电池发生破裂部位的随机性增加,其外壳破坏程度也有增加。     

Symptoms and musculoskeletal diseases in hospital nurses and in a group of university employees: a cross-sectional study

Background. Most studies have shown that nurses have a higher risk of developing musculoskeletal symptoms compared with other occupational groups. Aim. A cross-sectional study was performed to gain more insight into the prevalence rates of musculoskeletal disorders (MSDs) in nurses. Methods. The presence of musculoskeletal symptoms was revealed by personal interviews in a sample of 177 hospital nurses and in a reference group of 185 university employees. Musculoskeletal diseases were based on radiological examinations in all subjects. Results. Lower back pain (61% vs 42.2%) was the most frequently reported symptom, followed by neck pain (48.6% vs 38.4%) and shoulder pain (36.7% vs 25.9%), with a significantly higher prevalence in nurses. Women had about a 2-fold risk of upper limb region and neck pain compared with men. The most common abnormal findings on radiological examinations were disc herniations (n?=?40). Conclusions. Nurses showed a significantly higher risk of MSDs. Prevalence rates in nurses increased significantly with age. Musculoskeletal symptoms were also common in university employees. This suggests the need for effective intervention strategies involving workers’ active participation, in order to improve the process and organization of work and promote a positive psychosocial work environment.