A comparison of three observational techniques for assessing postural loads in industry.

This study aims to compare 3 observational techniques for assessing postural load, namely, OWAS, RULA, and REBA. The comparison was based on the evaluation results generated by the classification techniques using 301 working postures. All postures were sampled from the iron and steel, electronics, automotive, and chemical industries, and a general hospital. While only about 21% of the 301 postures were classified at the action category/level 3 or 4 by both OWAS and REBA, about 56% of the postures were classified into action level 3 or 4 by RULA. The inter-method reliability for postural load category between OWAS and RULA was just 29.2%, and the reliability between RULA and REBA was 48.2%. These results showed that compared to RULA, OWAS, and REBA generally underestimated postural loads for the analyzed postures, irrespective of industry, work type, and whether or not the body postures were in a balanced state.     

Postural Loading Assessment in Assembly Workers of an Iranian Telecommunication Manufacturing Company

Background. Changes in industries and work practices have coincided with work-related musculoskeletal disorders (MSDs). This study was conducted to determine the prevalence of MSDs and to assess postural loading in assembly workers of an Iranian telecommunication manufacturing company. Methods. Data were collected from 193 randomly selected workers in 4 units of the company. The Nordic musculoskeletal disorders questionnaire and the UBC ergonomic checklist were used as data collection tools. Loading on the upper body assessment (LUBA) was used to assess postural loading. Results. Lower back symptoms were the most prevalent problems among the workers (67.9%). LUBA showed that most assembly workers (94.3%) had experienced considerable and high postural loading (postural load index, PLI > 5). Regression analyses revealed that lighting, rotation, contact stress, repetition, gender and age were factors associated with symptoms. Conclusion. Work-related MSDs occurred at a high rate among workers. Postural loading requires consideration. Any ergonomic intervention should focus on eliminating ergonomic factors associated with symptoms.     

Analysis of postural load during tasks related to milking cows-a case study

The aim of this study was to analyse postural load during tasks related to milking cows of 2 farmers on 2 different farms (one with a manual milk transport system, the other with a fully automated milk transport system) as a case study. The participants were full-time farmers, they were both healthy and experienced in their job. The Ovako Working Posture Analyzing System (OWAS) was used to evaluate postural load and postural risk. Postural load was medium for the farmer on the farm with a manual milk transport system and high for the farmer working on the farm with a fully automated milk transport system. Thus, it can be concluded that a higher level of farm mechanization not always mean that the farmer's postural load is lower, but limitation of OWAS should be considered.     

An Ergonomie Study on Posture-Related Discomfort Among Preadolescent Agricultural Workers of West Bengal,India

In India, particularly in West Bengal, preadolescents are primarily associated with agricultural work in rural areas. Owing to poor socio-economic conditions, they are compelled to carry out a considerable number of manual, rigorous tasks in agricultural fields. The main aim of this study was to investigate postures adopted by preadolescent agricultural workers during individual agricultural activities and to analyze the causes of discomfort related to those postures. Fifty male and 50 female preadolescent agricultural workers were randomly selected and a detailed posture analysis was performed with the Ovako Working Posture Analysis System (OWAS). It was observed that those workers worked continuously in awkward postures during certain agricultural activities. Consequently they suffered from discomfort in different parts of their body. Even though they were very young, they were likely to suffer from serious musculoskeletal disorders in the future.     

An ergonomic study on posture-related discomfort among preadolescent agricultural workers of West Bengal, India.

In India, particularly in West Bengal, preadolescents are primarily associated with agricultural work in rural areas. Owing to poor socio-economic conditions, they are compelled to carry out a considerable number of manual, rigorous tasks in agricultural fields. The main aim of this study was to investigate postures adopted by preadolescent agricultural workers during individual agricultural activities and to analyze the causes of discomfort related to those postures. Fifty male and 50 female preadolescent agricultural workers were randomly selected and a detailed posture analysis was performed with the Ovako Working Posture Analysis System (OWAS). It was observed that those workers worked continuously in awkward postures during certain agricultural activities. Consequently they suffered from discomfort in different parts of their body. Even though they were very young, they were likely to suffer from serious musculoskeletal disorders in the future.     

Cervical musculoskeletal disorders and their relationships with personal and work-related factors among electronic assembly workers

IntroductionElectronics assembly workers are reported to have a high prevalence of musculoskeletal disorders (MSDs). This study investigated the prevalence of cervical MSDs and the complex relationships between cervical MSDs and individual, physical, psychosocial factors among electronics assembly workers. Methods: In this cross-sectional survey, self-administered questionnaires from 700 workers in electronics manufacturing workshops were analysed. Information concerning musculoskeletal symptoms, personal and work-related factors was collected. Finally, the prevalence of cervical MSDs was computed for different subgroups, and the relationships with different factors were analyzed using logistic regression and structural equation modeling (SEM). Results: The total 12 month prevalence of cervical MSDs among the survey population was 29.4%. Variables of gender, job tenure, twisting head frequently, neck flexion/extension for long time and work required to be done quickly showed significant associations with MSDs in a multivariate logistic regression (P < 0.05). The SEM analysis showed moderate and significant correlations between postural load (γ = 0.279), gender (γ = 0.233) and cervical MSDs, while there were weak but significant correlations between vibration (γ = 0.024), work stress (γ = 0.126), job tenure (γ = 0.024) and cervical MSDs. Both work stress and vibration affected the MSDs indirectly through postural load. Conclusions: The logistic regression results support previous general epidemiological MSD studies, and indicates that individual, physical, and psychosocial factors are related to cervical MSDs. The SEM provides a better approximation of the complexity of the relationship between risk factors and cervical MSDs. Improving awkward postures may be effective ways to control the influence of occupational stressors or vibration on MSDs. Practical Applications: The study is to improve prevention of MSDs among electronics assembly workers and promote their occupational health.     

A Multilevel Approach to Manual Lifting in Manufacturing Industries

Musculoskeletal injuries are often the consequences of wrong postural configurations used during Manual Materials Handling (MMH). This eventually leads to a large payout of worker’s compensation and loss of production time. A simulated study of back injury risks has been carried out on seven selected manufacturing industries to identify and evaluate harmful working postures. For each MMH task, Ovako Working Posture Analyzing System (OWAS) codes have been identified with the help of motion study pictures. Also, Chaffin's biomechanical model was used to calculate L5/S1 load compression values on the spine during MMH activities. The multilevel approach adopted was a combination of OWAS and Chaffin’s biomechanical model. The application of a digitizer enabled us to identify the coordinates and it made a subsequent evaluation of the angles of each body link possible.     

Comparisons of ergonomic evaluation tools (ALLA,RULA, REBA and OWAS) for farm work

Introduction. The purpose of this study was to validate the agricultural lower limb assessment (ALLA) ergonomic checklist, which was developed for various agricultural tasks in Korea. Methods. One hundred and ninety-six working postures were selected from the real agricultural tasks to verify ALLA, a lower limb body posture assessment tool, and then evaluated by 16 ergonomic experts. Hit rate, quadratic weighted κ, one-way analysis of variance and t-test analyses were applied to compare ALLA with other assessment tools. Results. ALLA analysis had a superior hit rate with ergonomic expert assessment compared with other assessment tools. Quadratic weighted κ analysis also showed that ALLA provided superior estimates of risk levels for farm working postures. Discussion. ALLA would be an appropriate assessment tool to estimate risk factors for various lower limb body postures which frequently occur in agricultural tasks in Korea. ALLA is a simple and accurate risk assessment tool that could be usefully applied to identify and mitigate risk factors and work-related musculoskeletal disorders in agricultural tasks, and also to evaluate the effects of control and intervention for working conditions.     

The Effect of an Ergonomic Intervention on Musculoskeletal,Psychosocial and Visual Strain of VDT Entry Work: Organization and Methodology of the International Study

This special issue of the International Journal of Occupational Safety and Ergonomics (JOSE) reports the results from an extensive multinational and multidisciplinary collaborative investigation of the impacts on visual display terminal (VDT) work of musculoskeletal, visual, ergonomic, and psychosocial factors. For brevity, this effort has been referred to as the MEPS project (musculoskeletal—eyestrain—psychosocial—stress). This paper lays out the basic methodological structure of the study. The study was conducted in 4 countries utilizing VDT data entry workers as the primary subject population. A battery of objective and subject assessment measures, including muscle load, visual function, physical and visual strain, postural, ergonomic and psychosocial factors, were assessed at 3 different points in time. A pre-test was given prior to an ergonomic intervention. Two post-tests were given 1 month and 1 year after the ergonomic intervention.     

Examining RULA’s Postural Scoring System With Selected Physiological and Psychophysiological Measures

The Rapid Upper Limb Assessment (RULA) survey is a posture-sampling tool used specifically to examine the level of risk associated with upper limb disorders of individual workers. This paper examines the relationship between RULA’s postural scoring system and measures of surface electromyography (EMG), self-reports of discomfort, and job attitude questionnaires. Twenty participants each performed a 30-min typing task on a computer in 3 working postures based on RULA’s scoring system. A statistically significant difference was found only in perceived discomfort. The perceived discomfort results demonstrated that RULA was able to identify “high risk” postures. The next question we need to ask is, does perceived discomfort result in tissue damage, or does tissue damage yield discomfort?     

汽车组装流水线作业工人工效学调查研究

对汽车组装流水线作业工人的作业体位、人机测量、劳动状况和生产环境的调查结果表明，过分低头、向前弯腰、手抬高过肩、手抬高过头、长时间站立、工作时间率较高、工作场所照度不足以及噪声值超标可能是存在的主要工效学问题，是导致慢性肌肉骨骼损伤的重要因素，应根据有关标准和法规，采取相应的劳动保护和工效学改进措施     

The effect of an ergonomic intervention on musculoskeletal, psychosocial and visual strain of VDT entry work: organization and methodology of the international study.

This special issue of the International Journal of Occupational Safety and Ergonomics (JOSE) reports the results from an extensive multinational and multidisciplinary collaborative investigation of the impacts on visual display terminal (VDT) work of musculoskeletal, visual, ergonomic, and psychosocial factors. For brevity, this effort has been referred to as the MEPS project (musculoskeletal--eyestrain--psychosocial--stress). This paper lays out the basic methodological structure of the study. The study was conducted in 4 countries utilizing VDT data entry workers as the primary subject population. A battery of objective and subject assessment measures, including muscle load, visual function, physical and visual strain, postural, ergonomic and psychosocial factors, were assessed at 3 different points in time. A pre-test was given prior to an ergonomic intervention. Two post-tests were given 1 month and 1 year after the ergonomic intervention.     

Participatory ergonomics and an evaluation of a low-cost improvement effect on cleaners' working posture.

Cleaning is a highly physically demanding job with a high frequency of awkward postures and working environments as contributing risk factors. Participatory ergonomics is a method in which end-users take an active role in identifying risk factors and solutions. The aim of this study was to apply the participatory ergonomics method to identify cleaning problems and to evaluate the effect of a low-cost improvement on cleaners' working postures in an office environment. The results show that the cleaning problem was identified, and the low-cost ergonomics solution suggested by the cleaners was implemented. Thus an improved working environment reduced the number of awkward cleaning postures and the Ovako Working Posture Analysis System (OWAS) action category for floor mopping decreased. It can be concluded that working in an improved environment can lead to better working postures which, in turn, leads to the cleaners' better health and better cleaning results.     

Assessment of Physical Load at Work Sites: A Finnish–German Concept

The aim of this article is to introduce a set of work physiology methods for the assessment of physical load at the work site and to consider (a) their relevance for different types of muscular work, and (b) their feasibility for occupational health and safety practitioners. The results of an ergonomic intervention study for the reduction of workload associated with various manual materials handling tasks were used for the evaluation of the feasibility and sensitivity of the measurements of heart rate, the Edholm and OWAS methods, and the ratings of overall and local perceived exertion. The methods proved feasible, although time consuming, and their sensitivity for the quantification of small changes in physical workload was limited. Despite these shortcomings, these methods can be used by occupational health and safety practitioners when their strategy and data collection techniques are developed further. In conclusion, there are relevant and feasible methods fora reliable work-site assessment of cardiorespiratory and postural load related to the activation of large muscle masses. On the other hand, field methods for the quantification of local static workload and repetitive type of workload with small muscle masses are scarce.     

机械行业工效学调查研究

对机械行业工人的慢性肌肉骨骼损伤进行了工效学分析。结果表明，目前我国机械行业工人主要存在的工效学问题是：坐椅高度和坐位工作台高度较高，正常作业范围过大，同一动作持续工作时间过长、劳动时间率偏高、工中休息时间偏少。建议根据有关法规和标准，采取工效学改进措施     

An experimental study to evaluate musculoskeletal disorders and postural stress of female craftworkers adopting different sitting postures

This study aimed to evaluate musculoskeletal disorders (MSDs) and postural stress among female craftworkers. The study was carried out on 75 adult female craftworkers in different districts of West Bengal. The prevalence of MSDs, body part discomfort (BPD) rating and body joint angles of the workers were evaluated with standard methods. Electromyography (EMG) of the shoulder and back muscles was recorded with the BIOPAC system. The prevalence of MSDs, BPD rating and deviation of joint angle were comparatively lower in the case of sitting on the floor with folded legs than squatting and sitting on the floor with stretched legs postures. The EMG and rms values of the shoulder and back muscles were comparatively lower in this posture. Therefore, it was concluded that sitting on the floor with folded legs was less hazardous and it imposed less postural stress in comparison to other sitting postures.     

Physical limitations and musculoskeletal complaints associated with work in unusual or restricted postures: a literature review

INTRODUCTION: The vast majority of ergonomics research has addressed the demands of work in standing or sitting postures, and understandably so. However, many workers (e.g., underground miners, aircraft baggage handlers, plumbers, agricultural workers, mechanics, and others) are often required to adopt postures such as kneeling, stooping, squatting, or lying down for significant periods of the workday. METHOD: A literature search was performed using the ISI Web of Science database (for years 1980-2004). Articles retrieved from this search were evaluated in terms of relevance to assessing physical capabilities of workers in these postures and/or the musculoskeletal epidemiology associated with these postures. RESULTS: Work in unusual and restricted postures was associated with significantly higher rates of musculoskeletal complaints compared to workers not adopting these postures in epidemiology studies (Odds Ratios ranging from 1.13 to 13). Some studies suggested a dose-response relationship, with longer exposures leading to increased musculoskeletal complaints. Physical strength and psychophysical lifting capacity vary significantly as unusual or restricted postures are adopted, with lower lifting capacities evident in the kneeling, squatting, and lying positions. CONCLUSIONS: Workers who adopt unusual or restricted postures appear to be at higher risk of musculoskeletal complaints and often exhibit reduced strength and lifting capacity. Research needs in this area include improved exposure assessment tools, studies of intervention effectiveness, adaptations of the body in response of work in unusual postures, and elucidation of relevant injury pathways. IMPACT ON INDUSTRY: Workers who adopt unusual or restricted postures in their work often experience higher musculoskeletal injury rates. If awkward postures cannot be eliminated in the workplace, jobs should be designed in accordance with the reduced strength and lifting capabilities observed in these postures.     

Effects of Neutral Posture on Muscle Tension During Computer Use

This study focused on developing a new approach to seated work positions as conducted on 67 office workers who use a Visual Display Terminal (VDT) as a major function of their working day. Muscle tension was measured by surface electromyography (sEMG) while participants were asked to adopt 4 selected working postures. Pain was measured before and after ergonomic intervention on the Nordic scale, which was modified for this study. Adjustable workstations were used to place participants in desired positions during the clinical testing sessions and the extended intervention period. Results indicate the effects of this ergonomic intervention may have positive effects on muscle tension and pain, significant enough to encourage employers to implement training and workstation modifications following these guidelines.     

Perceptions of postural stability after transitioning to standing among construction workers

Falls are a leading cause of fatal and nonfatal injuries in the construction trades. This study explored construction workers’ self-reports of postural stability upon standing after working in different postures. One hundred and eighty-nine workers in 10 construction trades provided stability ratings by completing a written questionnaire. Additional data collected included age, gender, years of experience, and rating of overall balance. Construction workers rated their overall balance as high, furthermore, no difference was found between trades or age groups. Significant differences in stability ratings were provided for the various postures. The most commonly used non-erect postures (bent over at waist, squatting, and forward kneeling) resulted in the largest self-reports of instability. Sitting on elevated surface and sitting on level surface resulted in the highest levels of self-reported stability and are recommended when maintaining balance is a concern. Differences associated with construction trade and age were also found, but were thought to be attributed to differences in tasks performed since no differences were found when each posture was analyzed separately. The results suggest that the working posture used to complete a task affects the postural stability upon standing regardless of construction trade and age of worker. Findings may lead to recommendations for redesign of tasks or tools to reduce the use of certain working postures, particularly in high-risk environments such as construction.